LG Top loaded fuzzy logic Washing Machine drain motor problem diagnosis and fix complete tutorial

Поделиться
HTML-код
  • Опубликовано: 24 янв 2025

Комментарии • 52

  • @mahathevkrishna7839
    @mahathevkrishna7839 Год назад +2

    A very precise, clear explanation and tests performed by you Brother Ravi! You took extra care in warning the viewers about the dangers of 220 Volts AC which can be fatal if negligent! I feel with an older machine, the time will come eventually when the drain motor got to be replaced if dirty water does not drain out! Thank you so much!

  • @weiyong6792
    @weiyong6792 10 месяцев назад +1

    Your video was very clear and helpful. Thank you for sharing!

  • @acalthu
    @acalthu 9 месяцев назад

    Very methodical video. My own LG washing machine is facing this same issue, this video will be helpful when troubleshooting. Abans quoted 18000 for replacement, but that's highway robbery.

  • @ayin6866
    @ayin6866 Год назад

    i love you ravi you saved me, i know what the problem is. but i should call A/S proffesonalist. anyway thank you very much.

  • @loopy194
    @loopy194 Месяц назад

    thank you bro you safe me tons of money! appreaciate!

  • @dhammikawijesuriya9918
    @dhammikawijesuriya9918 Год назад

    Very clear and detailed presentation. Thank you very much.

  • @chandranchandran7351
    @chandranchandran7351 Год назад

    Your explanation is so useful

  • @saleenasaleena9499
    @saleenasaleena9499 7 месяцев назад

    Bro ultra ordinary explanation

  • @imannudein
    @imannudein Год назад

    Very precise and informative. Many thanks!

  • @syedilyas6104
    @syedilyas6104 3 месяца назад

    Very informative 👏

  • @bhaskarc5245
    @bhaskarc5245 9 месяцев назад

    Sir very good demo thanks

  • @johnmethew95
    @johnmethew95 9 месяцев назад

    Very good information. 👌

  • @noelsilveira9244
    @noelsilveira9244 2 месяца назад

    Hi Ravi, excellent videos on your channel are very helpful, my machine is not spinning, however, I checked by replacing with a new sensor, still not working and checked the drain motor it's working fine, the problem identified by the technician is the main motor needs to be replaced? can you suggest if the motor can be repaired and if I would have to buy a new motor, what is the model no. of this part, as LG has discontinued to sell these parts, but if I know the model no. I can try on amazon or ebay.

    • @ravifixall
      @ravifixall  2 месяца назад

      Sorry no idea about the model number, anyway better replace a new motor than repair older one.

  • @cdeealcaz5019
    @cdeealcaz5019 Год назад

    Thanks you very much for this video sir!!

  • @pradeepmahendrasemage4043
    @pradeepmahendrasemage4043 Год назад

    Nice episode, Thanks.

  • @princessdiva2304
    @princessdiva2304 7 месяцев назад

    Hello Sir, your video is very good and easy to understand. I also have the same washing machine, but the problem is that 'motor/drum/pulsator are running continuously'. After 30 seconds around, smoke comes from below (near to gearbox/motor/drain pump), and then I switch off the power supply.
    Could you please help with the reason and fix? Let me know if you are comfortable in talking on phone.
    Thanks in advance, Sir!

    • @ravifixall
      @ravifixall  7 месяцев назад

      Hard to say what is wrong without inspection.

  • @tepeyrubio3361
    @tepeyrubio3361 Год назад

    Thanks for this video :)

  • @Kanakadharaphotography
    @Kanakadharaphotography Год назад

    hello ravi, i have changed the motor but the problem is same drum is not rotating or spinning, can you help out with this problem

  • @hold_ma_beer9815
    @hold_ma_beer9815 6 месяцев назад

    Hey man, I got the same issue, but the motor actually works and pull till click, but no water comes out. Any ideas?
    Thank you

    • @ravifixall
      @ravifixall  6 месяцев назад +1

      May be draining hose clogged

    • @hold_ma_beer9815
      @hold_ma_beer9815 6 месяцев назад

      @@ravifixall Pulled out all the hoses too. Still no water..

  • @tinkerxtinker1154
    @tinkerxtinker1154 6 месяцев назад

    If ever some of you encounter that the drain is always open even when washing, check the hook of the drain motor if it is properly aligned, it happened to me such that it is over pulling the drain plug during wash :)

  • @alukooluwafemio.228
    @alukooluwafemio.228 11 месяцев назад

    How to repair the same machine that the drum does not swing to dry clothes but down plate rotate? @Ravi please. Thanks

    • @ravifixall
      @ravifixall  11 месяцев назад

      May be bad water level sensor

  • @muhammadhamzaniazi4739
    @muhammadhamzaniazi4739 Год назад

    Hi Ravi Fix. I have the same model washing machine but it has been acting weird for the last few days. In automatic wash and rinse mode, is not retained in the tub and it fills and drains out at the same time. Also in manual mode, it does the same sometimes. But sometimes it works fine in manual mode. Can you help me diagnose the issue?

    • @ravifixall
      @ravifixall  Год назад +1

      Check that drain valve is stucked open..

    • @edwinbongas
      @edwinbongas 2 месяца назад

      Hello Sir, have you found a solution? I’m facing the same issue. After the wash process, it continues to rinse by draining the tube, but once the process finishes, the motor doesn’t turn back to close when refilling with clean water.

    • @edwinbongas
      @edwinbongas 2 месяца назад

      @@ravifixall the drain valve is not stuck, because if I turn off the machine it will shut

  • @cmanila1965
    @cmanila1965 Год назад

    Very informative sir, how about LG fully automatic machine not holding water, the water from the inlet continously flow and water kept coming out of the drain hose, I check the drain motor and saw that the motor doesn't stop waorking closing and opening the drain continuously, does it mean the drain motor is defective?

    • @ravifixall
      @ravifixall  Год назад

      Hard to say something. May be bad PCB. Try it with a professional technician

  • @krishivrastogi9463
    @krishivrastogi9463 2 года назад

    Can you share a video on how to fix a jammed pulsator plate?

  • @ashokan2812
    @ashokan2812 Год назад

    Hi ravi... My LG Top loader WF 750 auto power off during a cycle. One I press the start button and it works for a minute or so and then shuts down completely. What could be the problem? Any idea?

    • @ravifixall
      @ravifixall  Год назад

      May be pcb error or bad capacitor could cause. Not sure.

    • @ashokan2812
      @ashokan2812 Год назад

      My thought exactly, but b4 removing I just checked the plug base and to see there was corrosion. Checked with multimeter and there was voltage drop. After replacing base and plug top, it worked. Thank you for your reply.

  • @dilipraj-sy6bp
    @dilipraj-sy6bp 5 месяцев назад

    if the drain motor opens and closes continuously while draining water then also it's drain motor problem?

  • @mtalibkhan1
    @mtalibkhan1 8 месяцев назад

    Hello dear why drain motor is frequently moving plunger in and outside.

  • @omaraldoury2776
    @omaraldoury2776 Год назад

    Thank you

  • @ThevarajaThuvarakan
    @ThevarajaThuvarakan 2 месяца назад

    Good performance

  • @perera3017
    @perera3017 Год назад

    Thankyou 👍

  • @narasingarao2189
    @narasingarao2189 2 года назад

    Even I change pressure switch PE found why sir

  • @rahulgupta43701
    @rahulgupta43701 Год назад

    Sir you said it costs 5$ but the LG engineer came in my house told me its 22$ and provinding bill as well. What should i do?

    • @ravifixall
      @ravifixall  Год назад

      May be that could be the price in your country.

    • @rahulgupta43701
      @rahulgupta43701 Год назад

      @@ravifixall this is insane. Where do you live? I am from india.

    • @ravifixall
      @ravifixall  Год назад +1

      @@rahulgupta43701
      Sri Lanka

  • @safinaebrahim2027
    @safinaebrahim2027 Год назад

    Hi sir even if lid closed it still shows dE

    • @ravifixall
      @ravifixall  Год назад

      Check the magnet in the lid.

  • @darkcarnageindian79
    @darkcarnageindian79 11 месяцев назад

    My motor lever is not going in after power up. Is it also a faulty motor?