I bought some 250 ohms. When I got them, very low volume. So I looked it up. Apparently I needed a headphone amp. So I bought one. I plugged one end into my laptop, the other into the amp. Same exact low volume. Did I forget to buy the do-whatey to attach to the when-whatey which needed to attach to the who-whatey and the why-whatey as well? It's a never-ending trail! XD
Hey bro, can you help me with that mic stand holder your using to hold the behringer ma400 to the stand like that.? Thank you and great video btw. Helped a ton. Ron
Hey man! Thank you for the kind words! I should have added it to the video but in my vlogging channel, I explained how I did it if I’m not mistaken. Here is the bracket I used: On-Stage MY550 Microphone Extension Attachment Bar a.co/d/3iKsgcz And here is the video: ruclips.net/video/tYIIGuBZwlc/видео.html Go ahead and sub to the vlogging channel, I would appreciate it.
I went to your vlog and could not find any details on this like you said. Also, on that "monitor input it may be worth mentioning that a (left-right) tip-ring-sleeve, 1/4" cable will perhaps work where they have no 1/8" concern. I am not trying to criticize in a mean way. Only trying help with my prospective. I think you are doing a great job!
This is the video: ruclips.net/video/tYIIGuBZwlc/видео.html Yes, that would work but I'm dealing with what I got and it's doing just fine. Thank you so much for watching!
It was a 1/4 left and right to a 3.5mm. 3.5mm goes into the Micro and the 1/4 goes into the 1/4 monitor out of the interface. Hope that helps. Thank you so much for watching!
just to clarify. the mic level knob only adjusts the audio level in your headphone and not the audio level coming out from the mic thru into the interface/mixer? Thanks man!
Hi, can you please tell me that which microphone you are using with it? Is it a condenser one or dynamic? If its condenser then is this device able to power up the mic without phantom power?
I'm using MXL 990 which is a condenser. The MA400 doesn't supply the phantom power, it's the audio interface. The mic thru cable that goes from the audio interface and into the MA400 supplies the phantom power to power the condenser. If you watched the entire video, I explained the process of everything so make sure you watching all of the video. I hope this helps! Thank you so much for watching!
It's all about personal preference. I know that the UCA222 is USB so that wouldn't match my environment. MA400 matches my environment so do some research and see if you can see what matches your environment. If you are close to your computer, get the UCA222. If you are far away in another room or closet, get the MA400. It's all about personal preference and I think both are good for what people need them to do. I hope this helps. Thank you so much for watching!
@@jannickgalima2707 They all do the same. It's just sending signal from a source like a copy so the quality is the same for when you listen to it on headphones from your audio interface. Doesn't change the audio and the product doesn't change the audio.
@@TheTechManE Awesome. Thanks for your fast response! I visited this video a lot of times already just to compare how it differs from the others. Again, thank you!
You can't use it for recording. It's a monitoring unit. You'll need a interface or anything that can send something to it. You can't use this just for recording. You'll need an interface or mixer. I hope this helped! Thank you so much for watching!
I used this for church as a wired IEM system works perfectly.
It really is a pretty simple and seamless thing to use on a budget. Thank you so much for watching!
It works!!! 🔥🔥🔥
Ayy sick!! Thank you so much for watching!
@9:09 made me cackle, yo. good setup vid, thanks!
Ha! Thank you so much for watching!!
I bought some 250 ohms. When I got them, very low volume. So I looked it up. Apparently I needed a headphone amp. So I bought one. I plugged one end into my laptop, the other into the amp. Same exact low volume. Did I forget to buy the do-whatey to attach to the when-whatey which needed to attach to the who-whatey and the why-whatey as well? It's a never-ending trail! XD
Ha! That's technology for ya! Can you be more specific?
Hey bro, can you help me with that mic stand holder your using to hold the behringer ma400 to the stand like that.? Thank you and great video btw. Helped a ton. Ron
Hey man! Thank you for the kind words! I should have added it to the video but in my vlogging channel, I explained how I did it if I’m not mistaken. Here is the bracket I used: On-Stage MY550 Microphone Extension Attachment Bar a.co/d/3iKsgcz
And here is the video: ruclips.net/video/tYIIGuBZwlc/видео.html
Go ahead and sub to the vlogging channel, I would appreciate it.
I went to your vlog and could not find any details on this like you said. Also, on that "monitor input it may be worth mentioning that a (left-right) tip-ring-sleeve, 1/4" cable will perhaps work where they have no 1/8" concern. I am not trying to criticize in a mean way. Only trying help with my prospective. I think you are doing a great job!
This is the video: ruclips.net/video/tYIIGuBZwlc/видео.html
Yes, that would work but I'm dealing with what I got and it's doing just fine. Thank you so much for watching!
@@TheTechManE You are welcome!
hey could i use this to hear myself with 0 latency while gaming with iems?
Since, with my setup at least, there is no latency so you can use this with gaming and in ears. Thank you so for watching!
So where did you connect to the pc/interface the 3.5 with adapter cable that you put in the interface?
It was a 1/4 left and right to a 3.5mm. 3.5mm goes into the Micro and the 1/4 goes into the 1/4 monitor out of the interface. Hope that helps. Thank you so much for watching!
just to clarify. the mic level knob only adjusts the audio level in your headphone and not the audio level coming out from the mic thru into the interface/mixer? Thanks man!
Correct. The mic level knob is to adjust the mic level coming out of the microphone and into the MA400.
@@TheTechManE Appreciate it a Lot!
@@avidpres2213 You're Welcome!
monitor input has TS or TRS input?
Can be both I believe but it’s made for TRS stereo if you do it correctly. Thank you so much for watching and subscribe for more!!
Hi, can you please tell me that which microphone you are using with it? Is it a condenser one or dynamic? If its condenser then is this device able to power up the mic without phantom power?
I'm using MXL 990 which is a condenser. The MA400 doesn't supply the phantom power, it's the audio interface. The mic thru cable that goes from the audio interface and into the MA400 supplies the phantom power to power the condenser. If you watched the entire video, I explained the process of everything so make sure you watching all of the video. I hope this helps! Thank you so much for watching!
Which is better, Behringer UCA222 or MA400?
It's all about personal preference. I know that the UCA222 is USB so that wouldn't match my environment. MA400 matches my environment so do some research and see if you can see what matches your environment. If you are close to your computer, get the UCA222. If you are far away in another room or closet, get the MA400. It's all about personal preference and I think both are good for what people need them to do. I hope this helps. Thank you so much for watching!
@@TheTechManE Got it. what about in terms of quality? any idea?
@@jannickgalima2707 They all do the same. It's just sending signal from a source like a copy so the quality is the same for when you listen to it on headphones from your audio interface. Doesn't change the audio and the product doesn't change the audio.
@@TheTechManE Awesome. Thanks for your fast response! I visited this video a lot of times already just to compare how it differs from the others. Again, thank you!
@@jannickgalima2707 You're welcome! I'm happy to help!
can i use this thing for recording without interface???
You can't use it for recording. It's a monitoring unit. You'll need a interface or anything that can send something to it. You can't use this just for recording. You'll need an interface or mixer. I hope this helped! Thank you so much for watching!
Dang bro hmu up snap I just watched this you've been up to a lot lately looks sick though haha
HA! I will! Thank you so much for watching bud!