I'm a visual learner, and the translation wasn't even necessary. Great video, Ted. I'm going to check this tomorrow thanks to your video. Much thanks from the USA!! 👍👍♥️
Thank you for sharing sir ted. Ang ganda pa nman ng microvawe oven nyo. Sayang nman kung bibili pa ng bgo mahal. Buti po marunong po kayo sa troble shoot.. nice po keep it up sir ted padon godbless po always
Just as a recommendation you should also check the high voltage capacitor that sits behind the panel where Ted removed the fuse. Ceramic fuses don't just blow and that fuse can handle 20 amps which is a lot of current. If you have a bad capacitor you can keep on changing that fuse and it's going to continue to blow. Usually when the capacitor fails you will hear a pop when you start the microwave and then the microwave will lose all power because of the fuse blowing.
That is exactly what's happening to my Microwave, what do you think I need to do in this case, is discharging the capacitor would be enough, or do I need to replace it?
@@kumsatekelegiorgis1325 Unfortunately, you more than likely need to replace the capacitor and the fuse. When you remove the capacitor, if it's blown, you will notice the top where the terminals are bulging which is a sure sign the capacitor is blown and you might have liquid discharging from the capacitor too so be careful how you handle it. The capacitor I bought from Amazon is this one: Meter Star Microwave Capacitor Replacement 2100V 0.91uf Compatible for Amana Electrolux Ge Kenmore and Whirlpool,Connect Pin 1/4" Standard Terminal. Don't worry it works with Samsung. This was $12 and make sure you double check the label on the capacitor you removed before buying the replacement. Good luck.
Sana all superman lol. Anyway thanks po sa pagbibigay ng idea at tutorial para sa mga basic troubleshooting. Minsan kase check the basic lang muna tsaka decide of bili ng bago or ipapaayos na lang.
Thank you sir. It worked changing the two fuses. Spent more time cleaning out greasy surfaces. The two fuses I took out were really greasy. Do you really need it the microwave right away. But I think I have to disassemble it again find an old toothbrush and clean up more in rhere. Thanks again!
I'm a visual learner, and the translation wasn't even necessary. Great video, Ted. I'm going to check this tomorrow thanks to your video. Much thanks from the USA!! 👍👍♥️
Thank you for sharing sir ted. Ang ganda pa nman ng microvawe oven nyo. Sayang nman kung bibili pa ng bgo mahal. Buti po marunong po kayo sa troble shoot.. nice po keep it up sir ted padon godbless po always
Salamat po
Yun oh. Another video learning. Waiting sir.
Thanks
Just as a recommendation you should also check the high voltage capacitor that sits behind the panel where Ted removed the fuse. Ceramic fuses don't just blow and that fuse can handle 20 amps which is a lot of current. If you have a bad capacitor you can keep on changing that fuse and it's going to continue to blow. Usually when the capacitor fails you will hear a pop when you start the microwave and then the microwave will lose all power because of the fuse blowing.
That is exactly what's happening to my Microwave, what do you think I need to do in this case, is discharging the capacitor would be enough, or do I need to replace it?
@@kumsatekelegiorgis1325 Unfortunately, you more than likely need to replace the capacitor and the fuse. When you remove the capacitor, if it's blown, you will notice the top where the terminals are bulging which is a sure sign the capacitor is blown and you might have liquid discharging from the capacitor too so be careful how you handle it. The capacitor I bought from Amazon is this one: Meter Star Microwave Capacitor Replacement 2100V 0.91uf Compatible for Amana Electrolux Ge Kenmore and Whirlpool,Connect Pin 1/4" Standard Terminal. Don't worry it works with Samsung. This was $12 and make sure you double check the label on the capacitor you removed before buying the replacement. Good luck.
waiting for this premiere so intriguing .
salamat po
Galing ni Sir Ted i have a lots to learn here
Thanks po
Worked like a charm. Thanks brother!!
Great to hear!
Sana all superman lol. Anyway thanks po sa pagbibigay ng idea at tutorial para sa mga basic troubleshooting. Minsan kase check the basic lang muna tsaka decide of bili ng bago or ipapaayos na lang.
Salamat po
Salamat po. Ok na yung microwave namin. 😊
Learn something new Everyday and Explore our Talent and SkillsGuys!
Waiting for this
Thanks
Well done my friend. Very nice.
Best wishes to you.
Thank you
Here na waiting
salamat po
Galing mo bradah way to go thousand tlaga na save mo
Salamat po
Very informative....one question remains, "huh?"
Eto n support plus tamsak
Salamat po
Excited to watch
Thanks
tamsak done lods waiting here for you
thank you full support
waiting set time thumbs up our host
salamat po
Thank you sir. It worked changing the two fuses. Spent more time cleaning out greasy surfaces. The two fuses I took out were really greasy. Do you really need it the microwave right away. But I think I have to disassemble it again find an old toothbrush and clean up more in rhere. Thanks again!
Glad it helped
Galing ng intro superman.enjoy watching here
Waiting po
Thanks
Superman troubleshoot thanks for sharing
Any time!
salamat
Waiting sir# kusina n manoy
Salamat Po na lolovess na Po
Galing magkumpuni ni sir ted good job po paharang here asfm po
Salamat po
let explore your talent keep on sharing
Salamat Tusok na po
Waiting here for you lods
salamat po fullpackage po
here na Bro tusoktusok na din pag may time😍
salamat po sis
Inwill support this premiere more power po stay safe godbless new frend here ❤️
thank you
Hello po.tamsak tuldok na po..ingat po kayo dyan..lorielifetv
fullpack din po.thanks po
Thank you for sharing this fullpack love ampler
Thanks po
I keep blowing the bottom fuse. I tested the thermal fuses, and all the door switches, and they all tested good. Any idea what it might be.
Ayon ohh galing tlaga
Thanks
beautiful day. keep vlogging your ls.
Thanks na suklian na po
Tamsak bagong dikit poh kapatid
salamat po full support
tamsak busilak yahoooo!
salamat po
Done flex po 2.2k - 2.22k
Thanks
Wow galing ni superman
Thanks
Tamsak na po
salamat po
salamat boss sa tutorial, full support ako sayo #Sassy Karen
Thanks you lolovess na Rin bahay mo
waiting po ako host
Thanks
good morning po.we are waiting..#kyahbot tv
Salamat yakap na po
@@TedPadon salamat kapatid
반갑습니다 ~
Thanks you we visited your house too
Waiting po From Simply Sally Vlogs
Salamat po na mahal na Rin po bahay mo
Tamsak done from simply sally vlogs
Thanks po
Tamsak done
Thanks
You unplugged the microwave from the power why turn off the breaker? Not plugged in there is no more power supply.
Done .im here
salamat po
Galing naman,ang dami nyo po natutunan..#janesvlog
Salamat Po
Yahoooo
Thanks
wow its a nice microwave device
Thanks
ayos pre. thanks for the tip. God Bless Us Always.
Pa support na din po sa aking YT channel stevemcban salamat po
Cge Salamat po
Tamsak po #kyaboth tv
Salamat na po
tamsak
salamat po
Tamsak #jhareid
Salamat Po
present
Thanks
Tamsak host
salamat po
tamsak done simply sally vlog
Thanks po
Tamsak done #jharein
Salamat Po na suklian na Po
Tamsak done # maam G♥️
salamat po
Pabalik din po... Salamat
Salamat na suklian na Po
from lorei
full support. thank you
English?? And no music. It’s distracting
Tuslok Na
Salamat
Pwedibang wala ng guys
Can't understand your voice
Guys. 🤣
Waiting for this
Salamat po
tamsak done
Salamat Po
Tamsak done
Thanks