Super tutoriel. Très simple à installer, même sans l'outil spécial ET 😊 Le résultat est exceptionnel par rapport à la détente d'origine de mon Shadow 1. Très ergonomique et c'est top de pouvoir régler la course.
Excellent instructions. And man was that return spring difficult to get in without that tool. Managed to finally do it by actually raising the trigger out a bit, putting the return spring in a pair of pliers, setting the smaller part of the spring behind the trigger first and actually using the pliers to push down on the spring, which pushes the entire trigger down and then get a 2 mm punch in the whole, which I could then follow with the last pin.
Hello! What exact product is that safety on this gun? It seems wide, but the lever seems to locate only at the far end from the axle, not all the way from the axle to the farest point. I was about to grind off a pice from my wide safety to achieve that same result, but seems that there is a ready solution/product. My gun is CZ Shadow 2 OR.
i had serois problems removing the original hollow pin on my SP01. the end were simehow riveted and my 2mm punch was seriously bent after my first attempt extracting it without drilling it with a 1.9mm drill. nontheless the new trigger working now and works perfect. money spent well... a notice for the hollow pin would have been nice in the video.
I installed mine and was unable to use the pretravel adjustment. It screw was too long and would either eliminate double action of make the trigger not function entirely. I was very upset about this. I believe the set screw is too long. without it entirely it works fine. I just don't know why I spent the additional money for the option to adjust.
I installed the ultimate trigger in my cz compact shadow and the double still doesn’t work , is the screw ? I used the longer one of the two ? Do I need to change out and then the double action will work ? Help
On my shadow 2 ( NEW) I’m not able to use the pre travel grub screw ? If I do it causes the double action not to work . Is this a tolerance issue ? or something else ???
Hello , i d like to change the original trigger of my CZ sp01 shadow by this one . may i set up the pretravel course by unscrewed (or screwed ?) the screw already installed ? .....(i d like to a have a little bit more longer)..?? .....is the SA mode have less weight too ? .... Thx in advance.
Hi, aftertravel and pretravel screws are already installed, SA mode have the same weight like OEM. With screws you can adjust pretravel and aftertravel courses...
A slave pin can be used to trap the Trigger Return Spring in the Trigger. Then the Trigger can be positioned in the frame and the slave pin can be pushed out as you install the Trigger Pin. A slave pin can be fabricated out of different materials, i prefer to use a hollow metal tube of a suitable diameter and length.
@@Sydneywizard When I bought my full floating trigger pin & comp only CFW had it & they ship their pin with a slave pin or like I did it exactly the same way except once I had the trigger in with the pin started I just used the tip of my finger to compress the spring into place & pushed in the pin.
I see that really all Shadow 2 Users have the problem with the spring. Not to build in just to use it. On one of my Shadow 2 it fits good but without pretravel screw. On the other one no chance i had to build in the original one. So maybe you can do there a explanation why? I'm not the only one who got this problems.
the part is OK, the video is cool but Shadow 2 users should have been alerted that the top grub screw is not just unnecessary but even incapacitating. I am a bit surprised as there is no doubt that the Shadow 2 presently outnumbers any other CZ gun in popularity.
pourquoi pas en français vous vendez des pièces dans le monde entier , l'anglais ,,,l'(anglais , je voudrais acheter cher vous mais je ne comprend rien de se que vous faite et le français alors bordel
Super tutoriel. Très simple à installer, même sans l'outil spécial ET 😊 Le résultat est exceptionnel par rapport à la détente d'origine de mon Shadow 1. Très ergonomique et c'est top de pouvoir régler la course.
Excellent instructions. And man was that return spring difficult to get in without that tool. Managed to finally do it by actually raising the trigger out a bit, putting the return spring in a pair of pliers, setting the smaller part of the spring behind the trigger first and actually using the pliers to push down on the spring, which pushes the entire trigger down and then get a 2 mm punch in the whole, which I could then follow with the last pin.
Hello! What exact product is that safety on this gun? It seems wide, but the lever seems to locate only at the far end from the axle, not all the way from the axle to the farest point. I was about to grind off a pice from my wide safety to achieve that same result, but seems that there is a ready solution/product. My gun is CZ Shadow 2 OR.
i had serois problems removing the original hollow pin on my SP01. the end were simehow riveted and my 2mm punch was seriously bent after my first attempt extracting it without drilling it with a 1.9mm drill. nontheless the new trigger working now and works perfect. money spent well... a notice for the hollow pin would have been nice in the video.
I installed mine and was unable to use the pretravel adjustment. It screw was too long and would either eliminate double action of make the trigger not function entirely. I was very upset about this. I believe the set screw is too long. without it entirely it works fine. I just don't know why I spent the additional money for the option to adjust.
Thanks Paulie, very helpful as always - hope to see you in 2025 in the sunny R of SA
Is the trigger pin supposed to fit easily in holes on the trigger? Mine does not. Feels wrong to have to hammer it in.
Bhai aap bahot achchhe video banate ho mehnat krte raho ek din bahot saflta milegi
I installed the ultimate trigger in my cz compact shadow and the double still doesn’t work , is the screw ? I used the longer one of the two ? Do I need to change out and then the double action will work ? Help
Will this work with P 01 with decocker? Is it the same process?
On my shadow 2 ( NEW) I’m not able to use the pre travel grub screw ? If I do it causes the double action not to work . Is this a tolerance issue ? or something else ???
hi, pretravel mostly need for shadow1, just remove it if your frame tolerance dont need it...
Hi, I installed it on my shadow 2 problem is , trigger does not reset for double action, already add pre travel but it just stuck up
Dave, remove front screw, you dont need it on your frame.
@@dmitrieemann thank you so much!! Have a great day ahead, appreciate much!
@@dmitrieemann Hi Good afternoon. Which screw do you mean please, the one on the trigger or is it on the pistol?
@@Blazemalta on screw
On my shadow one I have a problem after kit if I touch the safety double action don't work
Hello , i d like to change the original trigger of my CZ sp01 shadow by this one . may i set up the pretravel course by unscrewed (or screwed ?) the screw already installed ? .....(i d like to a have a little bit more longer)..?? .....is the SA mode have less weight too ? .... Thx in advance.
Hi, aftertravel and pretravel screws are already installed, SA mode have the same weight like OEM. With screws you can adjust pretravel and aftertravel courses...
@@dmitrieemann Thx ....keep on with the vids , it s really helpfull and instructive....;)
i cant choose, flat or ultimate?
Nice. Can you install the trigger spring without the tool? If so, how?
A slave pin can be used to trap the Trigger Return Spring in the Trigger. Then the Trigger can be positioned in the frame and the slave pin can be pushed out as you install the Trigger Pin. A slave pin can be fabricated out of different materials, i prefer to use a hollow metal tube of a suitable diameter and length.
@@tok3659 I'm trying to picture it.
@@tok3659 thanks. I needed that. Worked perfectly.
@@Sydneywizard When I bought my full floating trigger pin & comp only CFW had it & they ship their pin with a slave pin or like I did it exactly the same way except once I had the trigger in with the pin started I just used the tip of my finger to compress the spring into place & pushed in the pin.
I see that really all Shadow 2 Users have the problem with the spring. Not to build in just to use it. On one of my Shadow 2 it fits good but without pretravel screw. On the other one no chance i had to build in the original one. So maybe you can do there a explanation why? I'm not the only one who got this problems.
same here. I am going to leave a comment.
Is that gonna work with CZSPO1 and PO 1 please let me know????
yes, its working with P01
the part is OK, the video is cool but Shadow 2 users should have been alerted that the top grub screw is not just unnecessary but even incapacitating. I am a bit surprised as there is no doubt that the Shadow 2 presently outnumbers any other CZ gun in popularity.
please don’t smash your pistol when taking off the slide 😅😅
pourquoi pas en français vous vendez des pièces dans le monde entier , l'anglais ,,,l'(anglais , je voudrais acheter cher vous mais je ne comprend rien de se que vous faite et le français alors bordel