Awesome video thank you. My mag release screw stripped super easily and it looks like to install the new mag release I'll have to take apart way more than expected. I also want to flip it to other side anyway since I am left handed. Oh and reassembly video would be so appreciated. Thanks!
Thank you! Right, except for the trigger bar, trigger shoe and return spring, the absence of a disconnector and the pair of springs supporting the ejector on the TS series, everything else is pretty much the same.
LOL - Thank you! I know where to knock in case I'm out of a job. I'm constantly assembling/disassembling them so I will have the opportunity to create the "assembling" companion videos, but it takes a ton of time from an amateur like me on videography... So I can't promise how soon I will do it.
You have 3 actions that will influence in how the trigger bar spring interacts with the trigger bar: (1) the flat screw that retain the spring in place - The tighter it is it normally raises the spring, putting more tension between the spring and the trigger bar. (2) the spring geometry itself. If you bend the legs up or down, it will produce different levels of tension. You have to be carefaul because too much tension and the trigger drags too much, but not enough tension will prevent your trigger to reset properly. And finally (3), you can polish underneath the trigger bar, on the rails that are used to create a positive contact surface between the bar and the spring.
You are great instructor. Thanks so much for this. I’m a Glock guy but just recently started into CZ land with a sp01 and have learned a lot about the wonderful 75 from your videos.!
dying to see the assembly videos for slide and frame.... you have the best and most detailed videos I have seen on these firearms, thank you!
Awesome video thank you. My mag release screw stripped super easily and it looks like to install the new mag release I'll have to take apart way more than expected. I also want to flip it to other side anyway since I am left handed. Oh and reassembly video would be so appreciated. Thanks!
I have a TS2, but much of the disassembly is the same. So thanks for this. Your explanations and instructions are very clear!
Thank you! Right, except for the trigger bar, trigger shoe and return spring, the absence of a disconnector and the pair of springs supporting the ejector on the TS series, everything else is pretty much the same.
Yup. Single Action trigger.@@czarmorer
Great info, thank you very much. This is my go to video whenever I'm working on my CZs!
Glad you liked it :)
Thank you for the vid, very detailed and informative. The trick with the forceps and the trigger spring is much appreciated. 👍🏼👍🏼👍🏼
Great explanation, complete, useful tips. Thanks!
You’re hired! How about a reassemble video of both please!
LOL - Thank you! I know where to knock in case I'm out of a job. I'm constantly assembling/disassembling them so I will have the opportunity to create the "assembling" companion videos, but it takes a ton of time from an amateur like me on videography... So I can't promise how soon I will do it.
@@czarmorer thank you I appreciate your effort, I love your videos, thank you.
Dude thanks for all these Cz shadow videos they are super helpful!!!
Thank you! Can you please cover adjusting the trigger bar return spring? Had to pull my hair out before I got it perfectly tuned.
You have 3 actions that will influence in how the trigger bar spring interacts with the trigger bar: (1) the flat screw that retain the spring in place - The tighter it is it normally raises the spring, putting more tension between the spring and the trigger bar. (2) the spring geometry itself. If you bend the legs up or down, it will produce different levels of tension. You have to be carefaul because too much tension and the trigger drags too much, but not enough tension will prevent your trigger to reset properly. And finally (3), you can polish underneath the trigger bar, on the rails that are used to create a positive contact surface between the bar and the spring.
@@czarmorer thank you. It’s tricky to tune it correctly
Awesome video thanks!
glad you liked it!
Thank you
You're welcome
Are the 1/16 and 3/32 punches roll pin punches?
No, just flat punches.
@@czarmorer thanks! Are you going to do a video of how to fully reassemble a Shadow 2 anytime soon?
I couldn't remove the disconnector pin, should i use the same size starter punch for the trigger pin?
Yes, the starter punch will help start moving the pin out, then you use a 1/16 punch do finish driving it out
@@czarmorer worked perfectly
Is there a video for reassembly of the frame? TIA. 😊
I may do one, but I'm sure this is already out there.
I hope so. The disassembly video was very well done and a re-assembly video would be icing on the cake. Thanks.
You are great instructor. Thanks so much for this. I’m a Glock guy but just recently started into CZ land with a sp01 and have learned a lot about the wonderful 75 from your videos.!
thank you and I'm glad you liked it
🇮🇱👍💋❤️👌🇮🇱
This way to difficult for me 😂.