I really like your videos, they are very educational. I have purchased several of the items that you recommended on your you tube channel by logging on to your links you make available. I give those products a 5 star. They are definitely as good as you’ve described them. Thanks 🙏 so much for the info. Keep doing what you’re doing. I can’t wait for the next video.
Totally awesome work Josh. Turned out fantastic. I would like to share a tip if you dont mind :). Maybe you are familiar with it. But as a future investment you could get a tornador with a vaccum attachment. They are for soo good for sand, hair and these cheap velcro carpets. You blow compressed air into the carpet while vaccuming at the same time. Awesome tool. Keep up the awesome work.
Thanks so much! I have been co side ring one for a looong time haha. My only issue is the air requirements. I’m running a smaller compressor in my truck. It 5.1 can @ 90psi but I’m not sure if it would be sufficient.... what air compressor are you using?
@@imjoshv Ooh yeah true it needs to be stronger. But still, eventhough it only shoots 90psi I think it would be better than just vaccuming right? Maybe worth to try anyhow? Oh I am mostly detailing my own car which happens 1 or 2 times a week so I wouldnt need one xD. However! I have tried it out at a professional detail shop once on a velcro carpet with loads of embedded dirt that vaccum and drill brush couldnt handle. It blow me away! Really good stuff.
Hey Josh, amazing you are applying old candy removal techniques. I remember doing that when I didn't have a steamer or extractor😀. I used to have a fluffy towels with air compressor & wet and dry vacuum to perform cleaning and extraction before microfibers came along. I did several cars during weekends while I was studying at the University of Puerto Rico between 1985 to 1990. Great video and memories man! 👏✌😎 By the way, Obsessed Garage has lots of attachments and pressure washers that they have tested and proven. Check out their channel for those interesting reviews. Incredibly, still have both 10 year olds Black and Decker 1600 psi, and a Karcher 1800 psi that works better than a gas powered non Karcher 2500 I had. The best is always to change the hose they come with because most of them are covered of a plastic material that with lots of rubs end up exploding. Xoxo from Puerto Rico 👍🇵🇷
Just a question is the super clean safe to use on exterior plastics like the rocker panels, i drive a 2014 Kia Soul and many parts are plastic and some take a beating.
Yes, absolutely. You can Dilute super clean also just to be safe. But it should be fine. Just dont let it dry on the plastics just tp be safe. Spray it on, agitate, and rinse it off
Razor blades! First time I heard this, awesome turn around, would you have use a steamer in order to dissolve it as well? Just wondering as wouldn’t come up with compress air idea. Great idea!.
Yes, absolutely the steamer would work! Just to be clear, i didnt use razor blades haha... The customer did and thats why there were shaving everywhere!!
IMJOSHV - Car Detailing and Reconditioning Tips haha sure Josh, I know that you won’t be using razor blades and I like the way how you think and tackle down the stains really learn a lot from you. Keep up the good work!.
ive been using this one: amzn.to/38gIjF3 But i recently just got this one to compare it to. Not quite as powerful but significantly quieter!!! www.homedepot.com/p/Husky-4-5-Gal-Portable-Electric-Powered-Silent-Air-Compressor-3320445/305026725
DONT FORGET ABOUT OUR $200 GIVEAWAY!!!! MAKE SURE YOU ARE SUBSCRIBED, LIKE, AND COMMENT FOR A CHANCE TO WIN!
So satisfying! My 2008 4Runner looked like this and thanks to your videos I was able to restore it and sell it for top dollar!
Good morning!always happy to watch one of your videos. Great job!
Thanks crystal
Enjoyed the ideas in this video, and I think your voiceovers are improving as well. Keep it up
Thanks a ton! Im trying!!
Came out really nice. Enjoying the videos
Thank you!
Great job, tons of vacuum
👍👍
Looks awesome as usual
Thanks!!
Excellent work 🌟🐿🌟
Thank you! Cheers!
Great video as always
Thanks jay
Nice job!! That’s why you’re the man, looking out for your customers👍🏼.. Do you use Break buster full strength when cleaning the wheels like that?
Yea I use it straight. I just make sure to not let it dry on the wheel. Just let it dwell a littles and blast it clean!!
I really like your videos, they are very educational. I have purchased several of the items that you recommended on your you tube channel by logging on to your links you make available. I give those products a 5 star. They are definitely as good as you’ve described them. Thanks 🙏 so much for the info. Keep doing what you’re doing. I can’t wait for the next video.
Thanks so much
Nice whip very clean
Thanks 👍
Great results. I'm going to have to try brake buster
Its great stuff!
Great job!! Love your videos
Glad you like them!
You r awesome . How long does it take for seats to completely dry from this deep clean? What vacuum, shampooer and sprayer do you like best?
Totally awesome work Josh.
Turned out fantastic.
I would like to share a tip if you dont mind :). Maybe you are familiar with it. But as a future investment you could get a tornador with a vaccum attachment. They are for soo good for sand, hair and these cheap velcro carpets. You blow compressed air into the carpet while vaccuming at the same time. Awesome tool.
Keep up the awesome work.
Thanks so much! I have been co side ring one for a looong time haha. My only issue is the air requirements. I’m running a smaller compressor in my truck. It 5.1 can @ 90psi but I’m not sure if it would be sufficient.... what air compressor are you using?
@@imjoshv Ooh yeah true it needs to be stronger. But still, eventhough it only shoots 90psi I think it would be better than just vaccuming right? Maybe worth to try anyhow?
Oh I am mostly detailing my own car which happens 1 or 2 times a week so I wouldnt need one xD. However! I have tried it out at a professional detail shop once on a velcro carpet with loads of embedded dirt that vaccum and drill brush couldnt handle. It blow me away! Really good stuff.
Great turnaround here, I've never heard of using a razor blade to remove Skittles 😂
Haha I know... I’m assuming it was a hard block a skittles when the customer found it and tried to shave it down
Hey Josh, amazing you are applying old candy removal techniques. I remember doing that when I didn't have a steamer or extractor😀. I used to have a fluffy towels with air compressor & wet and dry vacuum to perform cleaning and extraction before microfibers came along. I did several cars during weekends while I was studying at the University of Puerto Rico between 1985 to 1990. Great video and memories man! 👏✌😎
By the way, Obsessed Garage has lots of attachments and pressure washers that they have tested and proven. Check out their channel for those interesting reviews. Incredibly, still have both 10 year olds Black and Decker 1600 psi, and a Karcher 1800 psi that works better than a gas powered non Karcher 2500 I had. The best is always to change the hose they come with because most of them are covered of a plastic material that with lots of rubs end up exploding.
Xoxo from Puerto Rico 👍🇵🇷
Thanks Humberto! Yea I know about the obsessed garage reviews! He actually inspired my reviews
Nice touch with the exterior wash; since they're trading up to a bigger SUV $$$!
Yea it doesn’t take much longer and really helps them out!!!
14:08 shows the dirt really getting pulled out.
👌
Just a question is the super clean safe to use on exterior plastics like the rocker panels, i drive a 2014 Kia Soul and many parts are plastic and some take a beating.
Yes, absolutely. You can Dilute super clean also just to be safe. But it should be fine. Just dont let it dry on the plastics just tp be safe. Spray it on, agitate, and rinse it off
Nice 👍🏻👍🏻👍🏻
Thanks!!
From one fellow detailing reconditioner to another 🔥🔥do you have an IG?
@Detailgreenusa
Turned out amazing, nice job 👍
Thanks dave
I don’t see a link in the description for that air gun
This is the updated version of the one i have
amzn.to/3hSxs8R
Razor blades! First time I heard this, awesome turn around, would you have use a steamer in order to dissolve it as well? Just wondering as wouldn’t come up with compress air idea. Great idea!.
Yes, absolutely the steamer would work! Just to be clear, i didnt use razor blades haha... The customer did and thats why there were shaving everywhere!!
IMJOSHV - Car Detailing and Reconditioning Tips haha sure Josh, I know that you won’t be using razor blades and I like the way how you think and tackle down the stains really learn a lot from you. Keep up the good work!.
Thanks Luis!
What air compressor do you use?
ive been using this one: amzn.to/38gIjF3
But i recently just got this one to compare it to. Not quite as powerful but significantly quieter!!!
www.homedepot.com/p/Husky-4-5-Gal-Portable-Electric-Powered-Silent-Air-Compressor-3320445/305026725
Hi
Why did it tap on this video... no regrets
Thanks!
Wow great work
🙏🙏