Your new Banshee looks so awesome! Thats one of my favorite color combos. I’m actually hoping to find a red ‘99 in similar condition. Awesome to see an OEM survivor like this 😁 thank you for the website shout out by the way. I’m glad the lights went to good use 👍
Happy to see u always working on making cool stuff. I spend a lot of $ making trick stuff too so when ur videos pop up I check u and sabo out right away. Respect !
That is a really clean banshee. 98 looked good. I'm more of a 93 and 96 Banshee guy. I would put a prodesign pro flow style air filter system ( uni filter ). I think they still make those. Definitely t5 pipes.
@@garagemcmatt yup... K&N are garbage! I had a 93 back in 94 that my dad bought new and then he got the 96 and the Pro design proflow system that was all we ever used.
I don't blame you for getting rid of the Raptor. Once something gets stolen from you it's just bad memories. Matt where do you get your carb jets for 400ex?
JD Racing out of Oregon is the logo on the cylinder 👍 Pick up an atv magazine from the 90s with a wild color scheme duner, good chance it was a JD Racing bike!
4 mil std. Port no increase in duration just 795 pistons and cut domes and stock carbs this recipe will create an engine that pulls real low and makes good power, I done it with a 5 mil and it was a real fun bike so easy to ride and smooth
Iv got a 98 blue n white, drive line cylinder ls 4 mil 28mm carbs runs good, maybe a little too fast, eye watering scary. Out 85 hp could got 100 hp very easily but wanted it to be friendly at low speed
Nice banshee man, I’m building one now for the first time, had to cut my stock A arms due too bolts being seized. Do you have any recommendations on affordable A arms? Doing a budget build so not looking for anything too high end
I've seen replacement arms for around $150 or if you decide to go a different route and spend a Lil more just get a quality name brand set. It hurts to put out a chunk of change but you get what you pay for
nice the oem gold rims with oem dunlops i do like the black yellow combo with gold rims i got a 1988 banshee all oem. (i mean i got oem parts) all original paint, oem gold rims and dunlop tyres dated 1987 all. white rear plastic oem them without the hole for the heel protection cause 1987/88 dont have that so there no mounting hole. but no front plastics i had to buy some with cut fender in white. have oem gas tank cover and radiator cover, still oem headlight with yamaha protection grill. but i run some after market silver rims with tyres, and black front plastics 2nd hand. some new gas tank and raditator cover from aliexpress, rear plastic is blue but painted black with a sticker kit got it for cheap (front rear and raditor cover for 50€ but front had cut for large gas tank i didnt know at the time) i replaced the foot peg and nerfbars with some xrw nerfbars with large footpegs. still have oem headers but not silencers it came with fatboy 2 that i ran but now i got full fmf set on it (way better then stock smooth power delivery and revs higher) it came with vforce 2 and i installed a twin air air filter it had a k&n with home made adaptor and holes drilled in cover that i traded with a friend for clean air box with all oem parts for normal air filter. i do love it. but its still a 2 stroke it doesnt like to ride in 1st gear and slow it bogg up a bit. if you dont give it full beans it was fine with stock headers but fmf give it all the beans always no chill anyway some day im gonna find a 2nd front plastic kit with none cut fenders (dont want new cause my rear aint fresh white after so many years) great quad always runs great i love it the 1988 cause its different not the usual grey frame basic shit. its lots of tiny things different. from front break disks, rear swing air, bearing carior, all different. minor details but its cool
Yeah the first few years had some difference with the front calipers and the swing arm had those holes by the shock mounts, I know the came with a smaller carrier too. Sucks you live far away I have a pile of banshee plastics. There's a set of oem white fronts without cuts but someone painted them black
@@garagemcmatt yeah, its hard to find decent plastics in france. + often cant ship the rear they to big for most shipping companies.. unless i take like dhl i think or something and they charge like 25 or 29€ (i think i forgot actaully) but yeah 2nd hand are hard i had one guy selling them but 300€ just for the front i was like nah im not trying to make a restoration, just want white front plastic not cut fenders, soemday someone gonna have some. white is the hardest color to get... you will find black and blue every time for like 100€ front and rear or like 50€ a piece... that is how i got my black front plastics 40€ +10€ shipping, it was a bit folded otherwise it wouldnt pass the dimensions. and yeah caliper, also front wheel hubs are different like where they mount on the A arm is slight different angle i think or smaller. ow yeah true those holes, tiny difference u tend to not see when u dont have both types of banshee, yeah rear carrier is like different bearings and mounts different then later models + no is not tube between the carrior and swing arm. and the carrier bolds on the outside of the swing arm. it hasnt bend or anything but does feel like it would if you have to much power. its cool that is different. + i like all the stock parts i got still with it... i even have the oem zip ties and handlebar + foam i didnt even know it was the oem i almost trew them out the foam and zipties till i saw it was oem.
Nice find. Everyone thinks their knackered old banshee is worth 10K. Over here, it is! Good on you for giving a home to a needy dog. How someone can treat an animal like this is appalling.
love the banshee especially since it was dang near untouched . i have a thing for saving stuff that can be fixed and saved . so id be going to get that banana banshee and do a frame swap . us REAL quad guys need to save as many 2 stroke quads as possible . its not always about making money . sometimes its just something to do for the passion . i wish i had mechanical skills like you and Sabo with a set up like Sabo . id be going crazy on builds 🤣🤣. sometimes i wish i could let the Devil inside me out on people who abuse animals and kids . i think id finally get a peaceful nights rest for once .
Honestly I think whoever is selling a Banshee is sniffing something because of the prices. Everyone around here asks the same insane prices for them. I found one months ago on Market Place here in my area that was just a roller and the dude as trying to get $2,500 for it. As far as I'm concerned when the engine or anything vital is missing the bike isn't worth squat. I don't care if it's complete with suspension and plastics. If the engine and anything engine related is gone it's now just a $700 bike if you're lucky. Everyone thinks they've got a block of gold sitting around.
I think alot of people either A bought it during the lock down and can't understand the bad purchase they made or B still have c19 prices in their minds and can't let go
@@garagemcmatt That and I'd add in C: Nostalgia, to the list as well. A lot of people try to bank on Nostalgia as well even if whatever they're selling isn't rare or uncommon. Banshee's while awesome are far from rare and can be easily found. But all of them are sold for insane prices. The best deal that I found on Market Place was a 2004 Yamaha Warrior going for $1,000. It was original and complete but the engine was blown up. Which is what I was looking for because I thought it was a good vessel for holding an old-school air-cooled 400cc 2-stroke I have out of a vintage IT400. I passed on it because I just didn't have the money or location for such a project. Since I have two vintage dirt bikes I need to worry about first I let it go. But that's what I'd like to do eventually. Get a Warrior with a bad engine and stuff either a YZ400 or 465 engine into it. Everyone's all caught up on the Banshee and tend to do the same thing everyone else does.
Not knocking your quad because it looks pretty good, but I never understood the banshee craze. People asking crazy money for them and acting like its the best quad ever. I totally understand all the junk out there. I flipped Powersports stuff for years and I can only say a handful of stuff was actually what people said or nice. The main problem is people just ride them and have no idea on how to maintain them. I wouldn't mind having another banshee one day for a bit if the price was right.
I've been saying I don't understand the crazy values on them. Made from 87 to 06 in America they made millions of them and basically just changed the plastic colors
yup its not that its like craze but its the 2 stroke that people like. but overal its a horrible frame... old, heavy, shitty suspension and brakes. but i love my banshee but its not even great its fun dont get me wrong but for trails rides it sucks i put fmf pipes on them i had it stock for a year it was fine but like no power low end and hit hard in power band but no top end. fmf is cool but low end power is horrible still it doesnt like riding slow, but revs pretty high and power come one smooth. but yeah it like it but it depens on my mood. my raptor 350 is a more chiller ride if i wanna cruise around. banshee is full gaz no chill. got it for like 2000€ needed rebuild got new hotrod cranks and prox piston and oem cylinder 64mm with it its a 1998 but yeah i wont sell it but also wouldnt buy one for more then 4k... ot be honest. but also i would never buy a shitty raptor 350 for 3000-4000€ road legal (or 2500 ish non road legal) still never would pay that for a raptor 350... i paid 1200€ for mine with paper licence plate road legal. that is fine. u know but yeah people go crazy with prices still are crazy prices.. they did go down but not enough... and i cant find good deals... nobody selling anything cheap nowdays cause they probably overpaid and now want sopme of there money back... i see yamaha blaster for 1500€ phase 1 and like 2000++€ fir phase 2 that is hella expensive last time i looked they were around 650-1000€ running...
Comment love bro Frm CHI Once the clutch is in it put a 15 tooth front sprocket on it with the 41 rear and RIDE IT!! You will b surprised and very pleased! Stock or built engines it don’t matter but these TWINS LOVE LOAD💪💪 I’ve seen a lot of people put 13’s on the front and riding them in the pilot’s down the road is the WORST THING FOR THEM.
@@garagemcmatt to start, I’ve got brand new v-force 3 reeds in box to send you. I will probably come across a few more things but that will b a surprise
@@TheCosmicRealm3 we will get to the bottom of this. I will also say even if it is slower I still prefer riding a 2-stroke just for the feeling of the power band
That paper you had on the Raptor is not a title. It’s a certificate of origin, you use those to get an actual title. However that one was very evident that it was one of the replica certificate of origin papers everyone is doing up on the east side. Homemade certificate of origin papers really. Make sure what you got with the banshee is an actual title and not a fake piece of paper that somebody paid someone to get.
Yeah thus is actually a nice banshee once cleaned up an being semi oem it has some value there but for an older raptor it was a solid deal i wouldnt have swapped a newer nice raptor even up for it but for the 2013 an all things considered he did good on the banshee but they are dropping in price like crazy! Aside from quite a few folks that dont seem to want to admit it and just leave them listed at 7500 8500+ but i get it sucks to over pay and when you want to sell prices ha e dropped 2-3k in a 8month period
Dang so I guessed right on the live stream 😂 looks good tho congrats brother and update on my stolen bike found it and got it back in my possession
That's good to hear
I have never and will never own a 4stroke. Congratulations homie! 2strokesmoke all day!! Let's Go!!!
Absolutely
Your new Banshee looks so awesome! Thats one of my favorite color combos. I’m actually hoping to find a red ‘99 in similar condition. Awesome to see an OEM survivor like this 😁 thank you for the website shout out by the way. I’m glad the lights went to good use 👍
Thanks bro. Yeah it definitely needed the lights on it. Thanks again bro talk soon, maybe get you sabo and me somewhere riding soon
Happy to see u always working on making cool stuff. I spend a lot of $ making trick stuff too so when ur videos pop up I check u and sabo out right away. Respect !
Thanks bro I appreciate it
Holy moly you got it back! That's awesome! Yeah I'm going to have to watch that video!
Yeah bro check it out
Hello yes!! 2 strokes. i own a 250R and a banshee as well. Love both
I love me some 2 strokes bro. I'm trying to have clean ones of every make eventually
Congratulations on finding a clean one brother!!
Thanks Preston
You got Jim Duncan racing cylinder heads those are worth some money. Jim Duncan was the stuff back in the 90s email.
Thanks for the info
Good looking banshee
Thanks bro
@@garagemcmatt digging the bills pipes
Hell yeah MATT!!! If you ever up north “New Hampshire” my way let me know would love to ride with you! Great buy brother love the 98s!
Absolutely. Thanks bro 98 one of my favorite colors, I just like the yellow on banshees
Nice machine!!
Thanks bro
That is a really clean banshee. 98 looked good. I'm more of a 93 and 96 Banshee guy. I would put a prodesign pro flow style air filter system ( uni filter ). I think they still make those. Definitely t5 pipes.
It's definitely going to a uni. It gets dusty around here the k&n doesn't give enough protection
@@garagemcmatt yup... K&N are garbage! I had a 93 back in 94 that my dad bought new and then he got the 96 and the Pro design proflow system that was all we ever used.
Keep the bill's pipes on now. Don't get rid of them, just keep Em. They're hard to find
Oh ill definitely keep them around. I like having extra stuff
I had toomeys on the Dyno. On my 4mil. They made a touch more peek power than my shears and had better bottom.
I'm gunna run these bills pipes to start with, and I got a set of t5's on the way
Nice Banshee! I’m thinking you were done with LSR after some issues awhile back. Are they doing better on quality these days?
I'm just changing who I order lsr parts from
I don't blame you for getting rid of the Raptor. Once something gets stolen from you it's just bad memories. Matt where do you get your carb jets for 400ex?
Anything carb I get my stuff from 223cycles.net
Check out 223 cycles.
JD Racing out of Oregon is the logo on the cylinder 👍
Pick up an atv magazine from the 90s with a wild color scheme duner, good chance it was a JD Racing bike!
Sweet thanks for the info bro
4 mil std. Port no increase in duration just 795 pistons and cut domes and stock carbs this recipe will create an engine that pulls real low and makes good power, I done it with a 5 mil and it was a real fun bike so easy to ride and smooth
There's so many different combos for banshees. I have some stuff on the way for it now
Iv got a 98 blue n white, drive line cylinder ls 4 mil 28mm carbs runs good, maybe a little too fast, eye watering scary. Out 85 hp could got 100 hp very easily but wanted it to be friendly at low speed
I've got a 98 that's getting built now to a 392.
She will be a ripper. My boy Tim has the 372 and it rips
You're lucky...usually these quads are broken and welded everywhere and or twisted
I looked at a bunch of them they were all beat
Nice banshee man, I’m building one now for the first time, had to cut my stock A arms due too bolts being seized. Do you have any recommendations on affordable A arms? Doing a budget build so not looking for anything too high end
I've seen replacement arms for around $150 or if you decide to go a different route and spend a Lil more just get a quality name brand set. It hurts to put out a chunk of change but you get what you pay for
nice the oem gold rims with oem dunlops
i do like the black yellow combo with gold rims
i got a 1988 banshee all oem. (i mean i got oem parts)
all original paint, oem gold rims and dunlop tyres dated 1987 all. white rear plastic oem them without the hole for the heel protection cause 1987/88 dont have that so there no mounting hole. but no front plastics i had to buy some with cut fender in white. have oem gas tank cover and radiator cover, still oem headlight with yamaha protection grill.
but i run some after market silver rims with tyres, and black front plastics 2nd hand. some new gas tank and raditator cover from aliexpress, rear plastic is blue but painted black with a sticker kit got it for cheap (front rear and raditor cover for 50€ but front had cut for large gas tank i didnt know at the time) i replaced the foot peg and nerfbars with some xrw nerfbars with large footpegs.
still have oem headers but not silencers it came with fatboy 2 that i ran but now i got full fmf set on it (way better then stock smooth power delivery and revs higher) it came with vforce 2 and i installed a twin air air filter it had a k&n with home made adaptor and holes drilled in cover that i traded with a friend for clean air box with all oem parts for normal air filter.
i do love it. but its still a 2 stroke it doesnt like to ride in 1st gear and slow it bogg up a bit. if you dont give it full beans it was fine with stock headers but fmf give it all the beans always no chill
anyway some day im gonna find a 2nd front plastic kit with none cut fenders (dont want new cause my rear aint fresh white after so many years)
great quad always runs great i love it the 1988 cause its different not the usual grey frame basic shit. its lots of tiny things different. from front break disks, rear swing air, bearing carior, all different. minor details but its cool
Yeah the first few years had some difference with the front calipers and the swing arm had those holes by the shock mounts, I know the came with a smaller carrier too. Sucks you live far away I have a pile of banshee plastics. There's a set of oem white fronts without cuts but someone painted them black
@@garagemcmatt yeah, its hard to find decent plastics in france. + often cant ship the rear they to big for most shipping companies.. unless i take like dhl i think or something and they charge like 25 or 29€ (i think i forgot actaully) but yeah 2nd hand are hard i had one guy selling them but 300€ just for the front i was like nah im not trying to make a restoration, just want white front plastic not cut fenders, soemday someone gonna have some.
white is the hardest color to get... you will find black and blue every time for like 100€ front and rear or like 50€ a piece... that is how i got my black front plastics 40€ +10€ shipping, it was a bit folded otherwise it wouldnt pass the dimensions.
and yeah caliper, also front wheel hubs are different like where they mount on the A arm is slight different angle i think or smaller. ow yeah true those holes, tiny difference u tend to not see when u dont have both types of banshee, yeah rear carrier is like different bearings and mounts different then later models + no is not tube between the carrior and swing arm. and the carrier bolds on the outside of the swing arm. it hasnt bend or anything but does feel like it would if you have to much power.
its cool that is different. + i like all the stock parts i got still with it... i even have the oem zip ties and handlebar + foam i didnt even know it was the oem i almost trew them out the foam and zipties till i saw it was oem.
I need some 465ex build videos please 🙏 any updates on her? I’m building mine with your videos part for part
I lost interest in that build. I still have it here. I'll get back on it this winter.
Nice find. Everyone thinks their knackered old banshee is worth 10K. Over here, it is!
Good on you for giving a home to a needy dog. How someone can treat an animal like this is appalling.
Yeah some of them were beat up that I looked at and way over priced
Where in the world did you find a banshee????I never see them for sale anymore unless there priced way above retail
Marketplace. There's a bunch for sale
love the banshee especially since it was dang near untouched . i have a thing for saving stuff that can be fixed and saved . so id be going to get that banana banshee and do a frame swap . us REAL quad guys need to save as many 2 stroke quads as possible . its not always about making money . sometimes its just something to do for the passion . i wish i had mechanical skills like you and Sabo with a set up like Sabo . id be going crazy on builds 🤣🤣. sometimes i wish i could let the Devil inside me out on people who abuse animals and kids . i think id finally get a peaceful nights rest for once .
Well said sir
So what are you doing for the giveaway then?
Just got to the end of the video my bad brother he’ll ya
I tried to explain my plans. 100k subs is a long way off bro, could be a year or 2 till we hit that
Honestly I think whoever is selling a Banshee is sniffing something because of the prices. Everyone around here asks the same insane prices for them. I found one months ago on Market Place here in my area that was just a roller and the dude as trying to get $2,500 for it. As far as I'm concerned when the engine or anything vital is missing the bike isn't worth squat. I don't care if it's complete with suspension and plastics. If the engine and anything engine related is gone it's now just a $700 bike if you're lucky. Everyone thinks they've got a block of gold sitting around.
I think alot of people either A bought it during the lock down and can't understand the bad purchase they made or B still have c19 prices in their minds and can't let go
@@garagemcmatt That and I'd add in C: Nostalgia, to the list as well. A lot of people try to bank on Nostalgia as well even if whatever they're selling isn't rare or uncommon. Banshee's while awesome are far from rare and can be easily found. But all of them are sold for insane prices.
The best deal that I found on Market Place was a 2004 Yamaha Warrior going for $1,000. It was original and complete but the engine was blown up. Which is what I was looking for because I thought it was a good vessel for holding an old-school air-cooled 400cc 2-stroke I have out of a vintage IT400. I passed on it because I just didn't have the money or location for such a project. Since I have two vintage dirt bikes I need to worry about first I let it go.
But that's what I'd like to do eventually. Get a Warrior with a bad engine and stuff either a YZ400 or 465 engine into it. Everyone's all caught up on the Banshee and tend to do the same thing everyone else does.
I just got the upp racing chain slider kit for a 1988 trx 250r do you know where I can find a diagram for those pieces for installing it.
I don't know off the top of my head. I'll see what I can find
Definitely a nice banshee
Thanks bro
Not knocking your quad because it looks pretty good, but I never understood the banshee craze. People asking crazy money for them and acting like its the best quad ever. I totally understand all the junk out there. I flipped Powersports stuff for years and I can only say a handful of stuff was actually what people said or nice. The main problem is people just ride them and have no idea on how to maintain them. I wouldn't mind having another banshee one day for a bit if the price was right.
I've been saying I don't understand the crazy values on them. Made from 87 to 06 in America they made millions of them and basically just changed the plastic colors
yup its not that its like craze but its the 2 stroke that people like.
but overal its a horrible frame... old, heavy, shitty suspension and brakes.
but i love my banshee but its not even great its fun dont get me wrong but for trails rides it sucks i put fmf pipes on them i had it stock for a year it was fine but like no power low end and hit hard in power band but no top end.
fmf is cool but low end power is horrible still it doesnt like riding slow, but revs pretty high and power come one smooth.
but yeah it like it but it depens on my mood. my raptor 350 is a more chiller ride if i wanna cruise around. banshee is full gaz no chill.
got it for like 2000€ needed rebuild got new hotrod cranks and prox piston and oem cylinder 64mm with it its a 1998 but yeah i wont sell it but also wouldnt buy one for more then 4k... ot be honest. but also i would never buy a shitty raptor 350 for 3000-4000€ road legal (or 2500 ish non road legal) still never would pay that for a raptor 350... i paid 1200€ for mine with paper licence plate road legal. that is fine. u know
but yeah people go crazy with prices still are crazy prices.. they did go down but not enough... and i cant find good deals... nobody selling anything cheap nowdays cause they probably overpaid and now want sopme of there money back... i see yamaha blaster for 1500€ phase 1 and like 2000++€ fir phase 2 that is hella expensive last time i looked they were around 650-1000€ running...
Where did you buy your 250r? I can’t find any decent ones by me
I built this 250r a few months ago, check out the older videos
There are 10k banshee after covid just depends on the build my guy if you built a banshee you would want 10k or more
@@lamboseeme8432 he isn’t saying that. He’s saying that not every banshee is worth gold. Condition is everything
@@TheATVShoppe that I agree 🫡
I'm well aware. I know the feeling putting money into a quad. I looked at banshees for $3000 up to $8500
@@garagemcmatt I’m on a build full powder coat everything brand new oem down to busy and bolts I’m 10k in without plastics
Comment love bro
Frm CHI
Once the clutch is in it put a 15 tooth front sprocket on it with the 41 rear and RIDE IT!! You will b surprised and very pleased! Stock or built engines it don’t matter but these TWINS LOVE LOAD💪💪
I’ve seen a lot of people put 13’s on the front and riding them in the pilot’s down the road is the WORST THING FOR THEM.
Yeah bro we put a 15 on Tim's 372 it rips
@@garagemcmatt to start, I’ve got brand new v-force 3 reeds in box to send you. I will probably come across a few more things but that will b a surprise
@CourtJ_ml9to you don't need to send anything bro, I appreciate it tho
How do the bills pipes sound?
They sound similar to pro circuit pipes to me
They sound similar to pro circuit pipes to me
Nothing comes close to T5s for all around power.
Yeah they are good for non stroker engines. Once u get into big bore strokes you need to start looking at some large diameter pipes
So does anyone know y the cylinder has J.D engraved into them? My banshee engine has the same thing
That's what I want to figure out. It's obviously someone that ports cylinders I'd just like to look up who and what they offer
If you don’t mind me asking, what did you pay for that?
I stopped saying what I pay for stuff on the channel. I will say it was a good deal not a great deal
But stock for stock the raptor would eat the banshee, and mod for mod a raptor would still eat a moded banshee
I know a few people that would beg to differ
@@garagemcmatt Those few people can beg all they want. You still can't turn fact into fiction.
@TheCosmicRealm3 we will be testing those claims soon
@@garagemcmatt I'm here for it
@@TheCosmicRealm3 we will get to the bottom of this. I will also say even if it is slower I still prefer riding a 2-stroke just for the feeling of the power band
👍👍👍
Yeah buddy
That paper you had on the Raptor is not a title. It’s a certificate of origin, you use those to get an actual title. However that one was very evident that it was one of the replica certificate of origin papers everyone is doing up on the east side. Homemade certificate of origin papers really. Make sure what you got with the banshee is an actual title and not a fake piece of paper that somebody paid someone to get.
Thanks
Id trade a raptor 700 for a non running banshee all day.
OEM of course
This one runs good
@@garagemcmatt heck yeah! It looks so good. 👍
Yeah thus is actually a nice banshee once cleaned up an being semi oem it has some value there but for an older raptor it was a solid deal i wouldnt have swapped a newer nice raptor even up for it but for the 2013 an all things considered he did good on the banshee but they are dropping in price like crazy! Aside from quite a few folks that dont seem to want to admit it and just leave them listed at 7500 8500+ but i get it sucks to over pay and when you want to sell prices ha e dropped 2-3k in a 8month period
@@macpac3803agreed
Nice find man, I looked for about a year for a banchee but 96-98% of them are hood rat specials😂😂
I've noticed all week.... bunch of junk for sale. I'm glad I held out for the rite one