Minelab Excalibur II Metal Detector Headphone Repair
HTML-код
- Опубликовано: 19 окт 2024
- This is how I repaired & replaced my headphones on my minelab excalibur ii metal detector
HELP ME GET TO 1000 SUBSCRIBERS
New? Subscribe here!!
/ @treasurehuntingchannel
Thank you for watching and don't forget to LIKE & SUBSCRIBE IT'S FREE
#minelab #excaliburii #metaldetector
.
~-~~-~~~-~~-~
Please watch: "Found So Much METAL DETECTING &For TREASURE In The Gulf Of Mexico."
• Found So Much METAL DE...
~-~~-~~~-~~-~
Originally Excalibur II has coupling capacitor and 2meg resitor across hedphone input. In your setup it appeares both are removed. Any reason?
The repair center had removed it a few years earlier. I can not remember the reason for it.
Those were only used with the Yellow Koss headphones, along with the Yellow wire that attached to the board
No longer required on modern units
@@MtPockets14U
@@MtPockets14U
hello .
my koss headphones need a new wire. do you need that capacitor and 2meg resistor? or can I just use left, right cable and ground?
thank you for answering my question
Hello. Please tell me how to remove the metal parts of the resistor regulators that are on the seals. Just pull up? Thank you
hello .
my koss headphones need a new wire. do you need that capacitor and 2meg resistor? or can I just use left, right cable and ground?
thank you for answering my question
@@arches100 thanks
Interesting video. Good job doing the repair.
Thank you and thank you for watching.
Hello, my excalibur metal detector stopped working. Do you think you can help me?
Min 9:54 with forstner bit I use that.
Does Original excalibur II’s headphones are waterproof ?
yes