XK Edge A430 With A XK X6 Programmable Transmitter

Поделиться
HTML-код
  • Опубликовано: 20 ноя 2024
  • СпортСпорт

Комментарии • 8

  • @GroundControlRC
    @GroundControlRC 11 месяцев назад +1

    Nice flight with the XK Edge! Using those adapters so you can use different props works a treat. See you in the Air!

    • @cheggers1973
      @cheggers1973  11 месяцев назад +1

      Cheers Tony Chap!, it's a different plane with the adapter and a GemFan 5030 prop, quieter way less vibrations due to the sloppy motor mount and it gives about 20g more thrust haha...

  • @theoztreecrasher2647
    @theoztreecrasher2647 Год назад +1

    How did you fit the aluminium prop adapter onto the stock motor with the crap plastic adapter? Change out the motor or make up an adapter base to fit the oddly spaced 3 mounting screws?

    • @cheggers1973
      @cheggers1973  Год назад +1

      If you remove the standard plastic mount with the 3 screws, a 3mm chuck grip prop adapter fits perfectly, the prop is a GemFan 5030, and you get 30g more thrust than standard and no wobble.

    • @theoztreecrasher2647
      @theoztreecrasher2647 Год назад +1

      @@cheggers1973 Ah thanks! My mistake! I had assumed that the A430 motor was exactly the same as our A160 motor. The shaft does NOT protrude out from the face that the 3-leg plastic adapter is screwed onto - so you can't add that adapter, only 1 that has a similar 3-screw flat base like stock. Back to the drawing board. 😉😊

  • @ahmadiswazirismail5587
    @ahmadiswazirismail5587 Год назад

    Hi.. can teach how to bind n set up at xk transmitter

    • @cheggers1973
      @cheggers1973  Год назад

      The instructions for binding the transmitter are in the instructions.... the XK A430 has a button in the battery compartment.

  • @ahmadiswazirismail5587
    @ahmadiswazirismail5587 Год назад

    Xk x6