Very informative tutorial, sir 👍 But i have one question, As you using Stomp Modeler, can you setup different setting in it, to save in another bank? Let say Bank 1A you use reverb with a 50% mix, then Bank 1B you setup the reverb mix about 20-30% And if so, should the pedal always on, and we dont worried about it? Coz im thinking to get this one looper pedal, instead i sell all my pedalboard and buy one digital multi effect Thank you
I have the same as Joyo as yours, but i sold mine. For me 2 channels are not enough. So i bought 6 channels and im the happiest guitar player in the world
leecookmusic its not Joyo though. Its called mooer pl6. But sometimes i wanted to buy the same joyo i sold, because im planning to build a minimal -easy to carry pedal setup. I recommend this product anyway.
Great video. One question though, where do i put the noise gate? Should i place it in it's own bank? I play mostly and the noise gate isn't that effective when i placed it in it's own bank.
Sorry for the delay. So depending on the style of music that you play may determine where you might want to put it. A quick question, do you use your amps distortion channel for your dirty sounds, or do you use a pedal?
Wow thanks for replying! I play mostly metal. All my tones comes from the pedalboard. I have a Boss NS-2 and i placed it in one of the banks. However the NS-2 just doesn't seem to detect the unwanted noise at times. Am i doing it wrong? Appreciate your advice!
@@infernoah4059 So I'm not sure how you have been plugging it in on the looper so I'm throwing out an one idea here. On the looper, here is a way to hook it up. 1. come out of the send on the first loop and plug it into the input of the NG. 2. Come out of the NG output into the first loop return. 3. Now take your send on the NG and plug it into the input of your dirt pedal. 4. Next take the output of your dirt pedal and plug it into the return of the NG. 5. Make sure the NG is on reduction. This is how you may already have it, but if not its how I would try it first. Let me know if that works or if you are already using it that way so we can hopefully find a solution. Blessings
That's a brilliant suggestion. Honestly I don't know what I'm doing to my pedalboard but I'm gonna start with your suggestion first. You've been very helpful! Thank u so much!
Hey man I've tried what you suggested. Somehow when I start to play after a complete stop, the inital note will somehow be lower in volume and will gradually increase to the correct volume that I've set. I've turned the threshold and decay both ways and even set it very low to almost no gate but still this happens. My setup is Boss NS-2 - Revv G3 - Delay/Reverb. Has anyone experience this before? What am I doing wrong? To add on, the moment i struck a note, the reduction LED immediately switches off, meaning there is no gate.
Hi, So I looked up the Zoom G3 (nice looking unit) and it looks like there is only a input (guitar) and a left/right output. You can run the G3 into one of the loops on the pxl4 and put it in the signal path with other pedals in the other loops, but you would need to have a loop in and out for each effect on the G3 to be able to have control over each effect on individual loops of the pxl4 . Hope that makes sense. Thanks for watching the video.
The plx4 doesn't have a way to send midi commands. Their are other loop switches (by the same manufacturer) that do offer midi commands. You would need a midi switch to change programs on your M5. I hope that was the question you are asking. Check out this unit. (Joyo PXL LIVE Dual 4-Channel Programable Pedal Controller) It offers a Midi out but its much bigger and more money. I went with the plx4 for its size. Hope this helps. Blessings
Hey man, So I have a few pedals going to the effects loop and some in the amp, I wanna use all of them at different times, how would i be able to connect it? My guitar to effects to amp. Effects loop send - pedals - effects return etc. Great video just my delay sounds terrible in front of the amp.
Hey sorry for the delay in getting you a reply. So my thought on the effects send-pedals-effects return from the looper would not work for the plx4. The pxl4 loops are not in the signal path when not selected which means it would cut off the sound between the preamp section and the power amp section (I'm not sure if the signal would still come through engaging the effects loop of the amp). Also the problem is you have two sends-one from the looper channel and one from the effects loop on the amp. I put it to paper and tried to make it work but didn't find a solution. Continue to research what you can. I may not have thought of some way to make it work. Sorry I wasn't more help. Thanks for watching the video.
I have one and managed to do it. First, put your pre-preamp pedals in the first loop. Then, for instance in loop 2, connect the send to the input of the amp, and the return to the "send" of the amps fx loop. Use the other loops for delays, etc., and finally connect the output of the pxl to the return of the fx loop of the amp. This way, loop 2 will be the distortion. I use it that way. Hope it helps
Can I, connect my amplifier to the switch and my stomp boxes? I want to use the Distortion of my Amplifier and replace the footswitch amplifier, and use the switch to use the stomp boxes and the channels of the amplifier.
Unfortunately it is only a loop pedal. It does not have a channel switching feature. You would have to go the the PXL Pro which has triggers in it to change channels on you amp. I totally understand wanting to use your amps distortion especially if you really like it. Hope that answered your question. www.amazon.com/PXL-PRO-Programable-Control-Station-Switcher/dp/B00FC4BOKE Blessings.
Thank you for the explanation, I'm still confused though, but that's just me
Thanks for the explanation! it has helped me greatly
Very informative tutorial, sir 👍
But i have one question,
As you using Stomp Modeler, can you setup different setting in it, to save in another bank?
Let say Bank 1A you use reverb with a 50% mix, then Bank 1B you setup the reverb mix about 20-30%
And if so, should the pedal always on, and we dont worried about it?
Coz im thinking to get this one looper pedal, instead i sell all my pedalboard and buy one digital multi effect
Thank you
I have the same as Joyo as yours, but i sold mine. For me 2 channels are not enough. So i bought 6 channels and im the happiest guitar player in the world
I agree, it would have been better to have 3 channels and maybe the bank up with 4 banks or so. I'm sure 6 channels is awesome! Nice!
leecookmusic its not Joyo though. Its called mooer pl6. But sometimes i wanted to buy the same joyo i sold, because im planning to build a minimal -easy to carry pedal setup.
I recommend this product anyway.
can you program the order of the loops? for example, instead of 1, 2, 3, 4 - you could do 2, 4, 1, 3?
hey bro
did Joyo can change the preset of line 6 m5 ?... thanks for the answer
Great job, really helpful thankyou
Great video. One question though, where do i put the noise gate? Should i place it in it's own bank? I play mostly and the noise gate isn't that effective when i placed it in it's own bank.
Sorry for the delay. So depending on the style of music that you play may determine where you might want to put it. A quick question, do you use your amps distortion channel for your dirty sounds, or do you use a pedal?
Wow thanks for replying! I play mostly metal. All my tones comes from the pedalboard. I have a Boss NS-2 and i placed it in one of the banks. However the NS-2 just doesn't seem to detect the unwanted noise at times. Am i doing it wrong? Appreciate your advice!
@@infernoah4059 So I'm not sure how you have been plugging it in on the looper so I'm throwing out an one idea here. On the looper, here is a way to hook it up. 1. come out of the send on the first loop and plug it into the input of the NG. 2. Come out of the NG output into the first loop return. 3. Now take your send on the NG and plug it into the input of your dirt pedal. 4. Next take the output of your dirt pedal and plug it into the return of the NG. 5. Make sure the NG is on reduction. This is how you may already have it, but if not its how I would try it first. Let me know if that works or if you are already using it that way so we can hopefully find a solution. Blessings
That's a brilliant suggestion. Honestly I don't know what I'm doing to my pedalboard but I'm gonna start with your suggestion first. You've been very helpful! Thank u so much!
Hey man I've tried what you suggested. Somehow when I start to play after a complete stop, the inital note will somehow be lower in volume and will gradually increase to the correct volume that I've set. I've turned the threshold and decay both ways and even set it very low to almost no gate but still this happens. My setup is Boss NS-2 - Revv G3 - Delay/Reverb. Has anyone experience this before? What am I doing wrong?
To add on, the moment i struck a note, the reduction LED immediately switches off, meaning there is no gate.
hi. lee.. im using a zoom g3 for my mod delay and reverb.. can i set them individually using that looper...
Hi, So I looked up the Zoom G3 (nice looking unit) and it looks like there is only a input (guitar) and a left/right output. You can run the G3 into one of the loops on the pxl4 and put it in the signal path with other pedals in the other loops, but you would need to have a loop in and out for each effect on the G3 to be able to have control over each effect on individual loops of the pxl4 . Hope that makes sense. Thanks for watching the video.
Can you show me more presets with M5....i have problems with m9....lote of rumble...tnks
How do i connect my pre amp joyo preamp house with PXL 8? I would really be grateful if someone could please help
Great video man! I have a question. Can I use a footswitch for the M5 and then plug it into a loop?
The plx4 doesn't have a way to send midi commands. Their are other loop switches (by the same manufacturer) that do offer midi commands. You would need a midi switch to change programs on your M5. I hope that was the question you are asking. Check out this unit. (Joyo PXL LIVE Dual 4-Channel Programable Pedal Controller) It offers a Midi out but its much bigger and more money. I went with the plx4 for its size. Hope this helps.
Blessings
Hey man, So I have a few pedals going to the effects loop and some in the amp, I wanna use all of them at different times, how would i be able to connect it? My guitar to effects to amp. Effects loop send - pedals - effects return etc. Great video just my delay sounds terrible in front of the amp.
Hey sorry for the delay in getting you a reply. So my thought on the effects send-pedals-effects return from the looper would not work for the plx4. The pxl4 loops are not in the signal path when not selected which means it would cut off the sound between the preamp section and the power amp section (I'm not sure if the signal would still come through engaging the effects loop of the amp). Also the problem is you have two sends-one from the looper channel and one from the effects loop on the amp. I put it to paper and tried to make it work but didn't find a solution. Continue to research what you can. I may not have thought of some way to make it work. Sorry I wasn't more help. Thanks for watching the video.
I have one and managed to do it. First, put your pre-preamp pedals in the first loop. Then, for instance in loop 2, connect the send to the input of the amp, and the return to the "send" of the amps fx loop. Use the other loops for delays, etc., and finally connect the output of the pxl to the return of the fx loop of the amp. This way, loop 2 will be the distortion. I use it that way. Hope it helps
Can I, connect my amplifier to the switch and my stomp boxes? I want to use the Distortion of my Amplifier and replace the footswitch amplifier, and use the switch to use the stomp boxes and the channels of the amplifier.
Unfortunately it is only a loop pedal. It does not have a channel switching feature. You would have to go the the PXL Pro which has triggers in it to change channels on you amp. I totally understand wanting to use your amps distortion especially if you really like it. Hope that answered your question.
www.amazon.com/PXL-PRO-Programable-Control-Station-Switcher/dp/B00FC4BOKE
Blessings.
Hi, is true bypass? Thancks
No popping noise?
No.
what size is your board
Pedaltrain PT1 22"W x 12.5"D
OK. I have the Jr and was wondering if it would fit
Nope still can't grasp it.....