Hey brother, i have a Husqvarna blower that i put a new carb, air filter and spark plug in, i cant seem to keep it running on full rpm, it sounds like its running dry or something and it blows out smoke from the exhaust, what would you say that is? Crank shaft gaskets maybe?
Hey there! I bought an echo pb250ln off of Facebook for 30 bucks! Looks brand new but wouldn’t start. Allegedly had all new parts. I took apart the carb and saw it was new and not gummed up. I bought a tune up kit and replaced the plug, and both air and fuel filter. New fuel lines were also allegedly installed. When it still wouldn’t start, I replaced the ignition coil. Now, the blower has compression spark and fuel but won’t start….sounds like it wants to then doesn’t. The last thing I’m going to try is replacing the flywheel (saw a service bulletin for those models where it can throw off the timing). If that doesn’t work, any ideas? Should I replace the carb and fuel lines anyway despite them being brand new?
Just asking can I still use the old parts , can I just clean it instead ? Or would it be better if I just buy new parts ? Please let me know thank you .
I wasn’t trying to be mean. Just helpful. You had to stop filming to use both hands so I missed the part I needed to see. Even though you explained it, it would have helped to see it. Thanks
I have a PB-250LN blower Aug 2015 when I set the swith to prim or up postion it wont fire but put the switch down to run postion I have conpression so thinking the carburetor. My Carb # PB-184 / Part number for the blower is # P42814123078 can I used your listed part from Amazon or do I need another kit for this blower. any help would be grateful.
same carb. id squirt a tiny bit of gas in mouth of carb and pull till it fires. if it fires its got compression and spark and needs carb and fuel lines
Pretty impressive that you did all that with one hand lol good informative video as well!!
Glad you enjoyed it
IKR?! Can probably fix an engine with one hand while holding a beer and not spill a drop.
Thank you!
Hey brother, i have a Husqvarna blower that i put a new carb, air filter and spark plug in, i cant seem to keep it running on full rpm, it sounds like its running dry or something and it blows out smoke from the exhaust, what would you say that is? Crank shaft gaskets maybe?
I felt like watching a one arm handicapped person doing mechanical work. By a stand.
Hey there! I bought an echo pb250ln off of Facebook for 30 bucks! Looks brand new but wouldn’t start. Allegedly had all new parts. I took apart the carb and saw it was new and not gummed up. I bought a tune up kit and replaced the plug, and both air and fuel filter. New fuel lines were also allegedly installed. When it still wouldn’t start, I replaced the ignition coil. Now, the blower has compression spark and fuel but won’t start….sounds like it wants to then doesn’t. The last thing I’m going to try is replacing the flywheel (saw a service bulletin for those models where it can throw off the timing). If that doesn’t work, any ideas? Should I replace the carb and fuel lines anyway despite them being brand new?
Just asking can I still use the old parts , can I just clean it instead ? Or would it be better if I just buy new parts ? Please let me know thank you .
You can try but youll end up buying new anyways.
Do you know were i can get a carburetor for a echo 2520 blower. I can't it on the internet.
www.leafblowersdirect.com/ECHO-PB-2520AA-Leaf-Blower/p106659.html?gclid=Cj0KCQiA4aacBhCUARIsAI55maEGH2NEHoonPVyF-JuhX8apzbBxyJ_swvH07xM1MDzkTQzVZKTonkIaAquvEALw_wcB
A tripod would have been nice…..
@@Bryan-bv4xq if a video doesnt help you move on to the next one. I made an effort to help you.
I wasn’t trying to be mean. Just helpful. You had to stop filming to use both hands so I missed the part I needed to see. Even though you explained it, it would have helped to see it. Thanks
@@Bryan-bv4xq first videos. I found a camera holder that worked through trial and error. Like everything in life you get better with practice.
I have a PB-250LN blower Aug 2015 when I set the swith to prim or up postion it wont fire but put the switch down to run postion I have conpression so thinking the carburetor. My Carb # PB-184 / Part number for the blower is # P42814123078 can I used your listed part from Amazon or do I need another kit for this blower. any help would be grateful.
same carb. id squirt a tiny bit of gas in mouth of carb and pull till it fires. if it fires its got compression and spark and needs carb and fuel lines
I INSTALLED THE NEW CARB ASSEMBLY STILL WON'T START😞
Did you check spark and compression first?