I was so sad my cameo 4 didn't cut or accept the registration mark for so long I've tried all the solution no result 😭 and you just simply amazingly saved my day my dear and my lovely sister who told me about the blade issue ❤ thank you soooooo much
I could not figure out what was wrong. I literally didn't bother using it for like a YEAR. This few minutes of a video just helped me so much! Thank you.
I am switching from a Cricut Maker to a Silhouette 4 - it has sat here for a couple weeks because I was too intimidated to try to use it. This instruction was simple and easy to follow!! Im finally ready to try my first cut!! Thank you!!!
Thank you for this video! I could not figure out why my blade was not cutting properly. I wasted a mega roll of easyweed HTV (ouch) and then I found your video. You are the only one who mentioned about locking it in. Thanks again!!!
You’re the best!!!! It took us 4 months to figure it out and your video just popped out and there you go!! That’s all we have to do! “Lock it in!” So helpful.
Thanks for your great explanation. My wife has been worried for weeks that she cannot put her Cameo 4 into operation because it does not cut. She watched a lot on Google and RUclips. Unfortunately there is not a single page in German that can help you. Now I just looked a little bit in English and immediately came across you. Soper explains, thanks for that. :)
OMG YOUR AWESOME AND SUCH A LIFE SAVER, I HAVE NEVER LOCKED MY BLADE SINCE I GOT MY MACHINE AND I COULDNT FOR THE LIFE OF ME FIGURE OUT WHY MY CUTS WOULDNT CUT ALL THE WAY OR WHY I WAS JUST HAVING SO MUCH TROUBLE. THANK YOU!! GOD BLESS YOU!! ALOHA AND MAHALO FROM HAWAII :)
THANK YOU SO MUCH FOR THIS! I had SO much trouble figuring out WHY my Cameo 4 wasn't cutting my paper and it turned out I didn't lock it in place....... I feel so stupid, I never used mine for 5 months because nothing was working and now I can FINALLY start using it, you have no idea how grateful I am for your video, THANK YOU!
Thank you soooo much for this. I would not have put the blade all the way in if I had not watched your tutorial. You saved me many sleepless nights!! 💐
You are a lifesaver! I've been trying to use my machine for days and could never get a good cut. Come to find out my blade was not locked!!! Thanks so much for this video!!!
This was honestly such a helpful video, thank you!! I forgot to lock the blade in the whole time I’ve been troubleshooting my cameo 🤦♂️ I’m still new to all this though haha
I have been fighting with my Cameo all weekend, so disappointed my designs were not cutting correctly. My blade was not inserted correctly! You video was so helpful Thank you!
You just saved me!! I’ve been struggling 2-3 days turns out my blade was not installed all the way just got it to click by watching this video thanks so much!!
THANK YOU! I could not get my new machine to work for the longest time...everyone kept saying "push down and lock" but no one explained what that actually meant!
This was a very helpful video! Thank you so much. I could not figure out why my blade was not going all the way down and then I realize that it was locked. Again, very helpful.
Super helpful, thanks. Got my C4 out of the box today and couldn't work out why it wasn't cutting. Blade not locked in place! Reading the other comments, I'm not alone. :)
I needed this! I didn't know about the locking button, I was just pushing it in all the way. Thank you, you just relieved an immense amount of frustration.
I just unboxed my new silhouette a few days ago, I couldn't find this info anywhere, including downloaded manual. Silhouette should have you on their payroll. Thank you!!!😃💎
This was so helpful...I'm not new to the cameo cutters, However, my brand new cameo 4 plus is sending me up the wall. I've cut two mats already UGH !!!!I never heard the click to seat the blade properly in the holder. This video was quick and to the point.
Lord sweet baby Jesus thank you!! I thought I was illiterate doing things wrong! I’ve had my Cameo 4 plus for about three years and was blaming the blade being broken every time :,) when all i had to do was clip the second step! Thank you thank you thank you!
Great video! Very helpful. I have used a Cricut (the older versions that took cartridges) and a Pazzle but not the Cameo. But I am excited to try out my new machine!
Okay first off........ WOW didn't know how to do that at all. Thank you very much!!!! May I ask a question please? Do you know any videos on cutting poster board stencils and or multi stencils? Please and thank you!
It was great however i wish at the beginning you addressed that the holder was in the open position i didnt realize pulling out and pushing in locked and unlocked it almost broke it trying to shove it in not relizing it was closed... but thank you for the rest of the information it was helpful
Omg this was so helpful!!! I have been inserting the blade completely wrong and was going to return my Cameo 4 because I thought it was defective. I’m new to this and thought the blade was common sense. 🤦🏻♀️ Can you help me understand what the numbers 10 to 0 mean?
I'm glad you found it helpful. :) The numbers indicate the depth of that specific blade. Manual (or may be referenced as ratchet) style blades are typically 1mm max with the exception of the deep cut blade. That is a 2mm max. They've done better labeling blades but there are so many it can still be confusing. Just remember - autoblades adjust the depth per the software settings; manual (ratchet) blades you must manually change the blade depth before inserting into the holder. This link may help you identify newer tools that weren't available when I recorded this video. www.silhouetteamerica.com/shop/blades-and-mats
Hi, thank you for this video. Do you know how to use a replacement auto blade that does not have the flat back? It's the only kind that Silhouette offers now and my machine doesn't seem to read it without the smart metal chip in the back of the flat version.
If you are using a manual blade of any type (no smart metal piece on blade) then you must change that in the software for the machine to cut. You can do that on the Send screen. From the choices available, be sure to choose the manual option. Be aware you must also adjust the blade depth manually. There's a round spot in the front (left) of the machine that you use to change depth.
Hello thanks for the great video I have a question I think my machine might be broken. This is what's happening when I do the test cut for example if I do a test cut at 2 and then do the actual cut the blade won't reset and it will add on 2 taking the blade to 4 is the blade supposed to reset by itself because I have been manually resetting the blade every time I do a cut
That's definitely not normal behavior. It's possible the blade carriage isn't hitting the correct spots when adjusting the blade and needs reset. Turn the machine off and then manually move the blade carriage along the bar right to left about 5 times. Then turn it back on. Also, double check that the cap on the blade is screwed on fully. I've seen a lot of issues resolved by that simple fix.
Thank for this video .it very nice explain .I have problems in during the cutting design.I have cameo 4 buy recently.my machine not cutting on design edge line .it cutting out side of edge line.what can do about it can you tell me any suggestions.thank you.
@@anoopkotwale807 aaah ok so it sounds like you are using print then cut with registration marks. It's a little buggy right now in the 4.3 versions. The biggest thing to remember is your page setup in Studio needs to match your printer setup. Verify that your orientation for both the printer and your project are the same - portrait/portrait etc. Then be sure your media size is set to Printer in your page setup panel.
Hi Dina I'm very new to this. I received my Cameo 4 as a gift and I cannot get it to print. I feel like I have tried everything. I turned it off and turned it back on and manually moved the carriage . I have made sure the cap on the blade is tight and I have made sure the blade is snapped in correctly. I am so frustrated!
Hi Dina, Thanks for the information. I have one question: that 10-0 is about how deep the Cameo cuts, or? If so - do I have to adjust it in on the blade as well as in the Software? Or not at all?
Hi :) yes, that is the blade depth for that particular style. There is a deep cut blade that goes up to 20. In terms of thickness... 10 is for items up to 1mm thick; 20 is for items up to 20mm thick. But I do caution using the blade at full depth for long periods or really thick materials (such as thicker chip board) may not be the best option for cutting thicker materials. The blades tend to get stuck and chew up the items being cut. I'd suggest a graduated cut starting on a lower depth and increasing the depth as you make additional passes. It may take some testing to find out the right depth and number of passes needed to cut all the way through. If you are using the autoblade, the software settings are used to make the adjustments. This is the extra tapping at the beginning of your cut jobs. If you are using a ratchet/manual style blade, you must physically adjust to the desired depth, change the blade type in the software to ratchet/manual and then send the job to cut.
The blade I bought that says silhouette auto blade, is rounded and longer than the one that came with my machine. Did I buy the wrong one? It was the only auto lad for silhouette in the store. I can’t figure out how to lock it in.
The adapters enable you to use other tools such as the black/blue ratchet blade, sketch pens/pencils etc and have them recognized correctly in the software for appropriate material cut settings. :)
good job. great video. but I found out the cap surrounding the blade can also be loose! I had to turn it until it was fully seated, so you might want to re do your video and show how that can be a problem too. arrgh.
I'd use the cover stock material setting which is for thicker card. Do a test cut to be sure the settings will work for your needs. If the cuts are not going all the way through the card, increase the force by 1-2. If it is cutting into the mat, decrease the force.
@@fahrultajien5916 You can use the regular blade for paper cutting. The kraft blade is not meant for intricate cuts or cuts with sharp turns/corners. I've not found it very user friendly especially with all the extra steps that are needed to even use it in the 2nd tool holder.
I just got my cameo 4. I inserted the autoblade correctly and locked into place correctly. But the silhouette studio still says no tool detected... what do i do??
It shouldn't matter as it resets the blade to zero before adjusting to the blade depth software setting. :) You'll hear one long click for the reset and shorter clicks to adjust the depth.
I'm not having trouble with the blade, but for some reason my Cameo 4 Blade House gets stuck and then makes a woodpecker sound. I can't find any help anywhere on it. I'm so frustrated
@@JeanieEllis1953 Hmm those are close to mine. blade is 3, force 24. You may have done this, but be sure all the tape and packing material has been removed from the inner portion of the machine. If that is all fine, look at your mat after the cut. Is it lightly scoring it (normal) or is it deeply etching or cutting into or through the mat (not normal)? If it is the latter, reduce your blade depth and increase your force by 1-2 and increase your passes by 1-2. Also check the blade for debris especially inside the cap. If the blade cannot move freely due to build up inside the blade cap it cannot move properly causing poor cuts.
I'd start with the pre-defined settings in the software for magnet sheets, adhesive and do a test cut first. if the test cut works without issues, run with it. :) You may need adjustments depending on the brand of magnet paper you are using. If that's the case, make the adjustments and save as a custom material cut setting. :)
I have the new cameo 4 rotary blade. I can only get it to do a test. When I hit sent, the blade does not touch the fabric but goes all around like it is cutting. The blade is out as it should be. Any suggestions would be greatly appreciated.
The higher force blades are still a bit buggy in terms of software settings and the workflow is quite clunky. Ensure the blade is inserted fully and locked in place. Then be sure you're selecting the 2nd blade option in the software for the correct cut settings. Your cut lines should be blue instead of red.
Some people have received defective autoblades. 1st, ensure the cap is secure and tightly screwed into place. You can verify the blade changes settings appropriately with manual testing. Be careful not to poke yourself with the blade. Use your thumb and make a long press on the bottom of the blade up into the housing. This will reset the blade to zero. Shorter presses will advance the blade depth. If that works, the blade is functioning properly. You can also inspect the blade for any damages such as cracks in the housing. The only other thing to verify is that your cut lines are active on the Send screen and you have selected the appropriate material/cut settings.
Yes. The cameo 4 has a flat backed blade with the metal piece on it. No other versions are like that. Make sure you've got the correct blade. They're labeled 1 & 2. Silhouette updated the blade colors and names recently. It could be labeled as A & B. Here's a good matrix that shows what blade works in the various machines. www.silhouetteamerica.com/tools 1/A is the main slot on the left. The right holder is for special tools like the rotary blade and the punch tool. If you look closely at the blades you'll see the grooves are different. Align the grooves with the slot in the blade holder and it should slide into the holder. you may need to give it a little push to click into place. There should be no gaps. If there are, it isn't seated fully and will not adjust correctly causing poor cuts.
So... I have used this once and seemed.great.. now after a few months .. I am sending my design to cut.. it starts then spits it back out.. checked blade it is in.. I know this is simple but I NEED HELP PLEASE!!!
My blade seems to be in correctly..locked in place. But the green dot is partially blue and I am having to crank up the settings drastically to get a cut. Any suggestions??
Are the locks fully in place? It almost sounds like it isn't fully pushed into place. When inserting the blade, hold one index finger under the lock lever. It should click in place. Then push the lock lever fully towards the blade until it clicks in place. You can also check to be sure the blade isn't damaged. With your finger, carefully press the blade cap up until it clicks. A long press will reset the blade to zero. A short press will advance the depth exposing more of the blade. When fully exposed, you should see a sharp angle. Inspect for a broken tip or chip on the blade. Also, some blades have a crack that doesn't allow proper depth changes. Check around the blade cap (where you press to adjust depth) and look for cracks or other defects. I also find that I need to increase force by 1-2 and sometimes blade depth by at least 1 on the default material settings. My custom cut settings have worked great though! :)
I thought this was a great video; one recommendation is to show that if the blade does not go all the way down its because the carriage holder could be in the 'locked" position. This took me a while to figure it out.. but overall a great video!
There is a version that was released with a cutting bug that left gaps in the cut lines. If you are using an older version you may want to look into one of the newer 4.3 or 4.4 releases.
Make sure it's unlocked first. Pull the lever out toward you. When locked in place, the dot on the handle is blue. That's how you know if it is locked/unlocked.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
I was so sad my cameo 4 didn't cut or accept the registration mark for so long I've tried all the solution no result 😭 and you just simply amazingly saved my day my dear and my lovely sister who told me about the blade issue ❤ thank you soooooo much
I'm so glad you found the video helpful! :)
I could not figure out what was wrong. I literally didn't bother using it for like a YEAR. This few minutes of a video just helped me so much! Thank you.
Just upgraded from the original Cameo 1 and could NOT figure out this blade situation. This was so helpful, THANK YOU!
I am switching from a Cricut Maker to a Silhouette 4 - it has sat here for a couple weeks because I was too intimidated to try to use it. This instruction was simple and easy to follow!! Im finally ready to try my first cut!! Thank you!!!
Thank you for this video! I could not figure out why my blade was not cutting properly. I wasted a mega roll of easyweed HTV (ouch) and then I found your video. You are the only one who mentioned about locking it in. Thanks again!!!
I'm glad you found it helpful! :)
You’re the best!!!! It took us 4 months to figure it out and your video just popped out and there you go!! That’s all we have to do! “Lock it in!” So helpful.
I’ve been looking at videos for days and finally came across yours and now I can do a test cut. Thanks so much
Thanks for your great explanation. My wife has been worried for weeks that she cannot put her Cameo 4 into operation because it does not cut. She watched a lot on Google and RUclips. Unfortunately there is not a single page in German that can help you. Now I just looked a little bit in English and immediately came across you. Soper explains, thanks for that. :)
OMG YOUR AWESOME AND SUCH A LIFE SAVER, I HAVE NEVER LOCKED MY BLADE SINCE I GOT MY MACHINE AND I COULDNT FOR THE LIFE OF ME FIGURE OUT WHY MY CUTS WOULDNT CUT ALL THE WAY OR WHY I WAS JUST HAVING SO MUCH TROUBLE. THANK YOU!! GOD BLESS YOU!! ALOHA AND MAHALO FROM HAWAII :)
Wife bought this, fought with it for 2 days, then BAM. You came along! Thanks :)
THANK YOU SO MUCH FOR THIS! I had SO much trouble figuring out WHY my Cameo 4 wasn't cutting my paper and it turned out I didn't lock it in place....... I feel so stupid, I never used mine for 5 months because nothing was working and now I can FINALLY start using it, you have no idea how grateful I am for your video, THANK YOU!
Thank you soooo much for this. I would not have put the blade all the way in if I had not watched your tutorial. You saved me many sleepless nights!! 💐
You are a lifesaver! I've been trying to use my machine for days and could never get a good cut. Come to find out my blade was not locked!!! Thanks so much for this video!!!
I'm so glad you found it helpful, Tameka :)
This was honestly such a helpful video, thank you!! I forgot to lock the blade in the whole time I’ve been troubleshooting my cameo 🤦♂️ I’m still new to all this though haha
I have been fighting with my Cameo all weekend, so disappointed my designs were not cutting correctly. My blade was not inserted correctly! You video was so helpful Thank you!
You just saved me!! I’ve been struggling 2-3 days turns out my blade was not installed all the way just got it to click by watching this video thanks so much!!
Hi Dina, Thank you. I can't believe the Quick Start Guide that came with my Cameo 4 didn't even come with instructions on how to insert the blade.
THANK YOU! I could not get my new machine to work for the longest time...everyone kept saying "push down and lock" but no one explained what that actually meant!
This was a very helpful video! Thank you so much. I could not figure out why my blade was not going all the way down and then I realize that it was locked. Again, very helpful.
Thank. you so much. Im new. Got my Cameo 4 yesterday, and couldn't get the blade to work. I wasn't locking it properly. Thanks again.
What did you do cause i can't get either to work
@@toquesha mine still won't work either
Super helpful, thanks. Got my C4 out of the box today and couldn't work out why it wasn't cutting. Blade not locked in place! Reading the other comments, I'm not alone. :)
I needed this! I didn't know about the locking button, I was just pushing it in all the way. Thank you, you just relieved an immense amount of frustration.
Thank you! I didn't realize the blade had to be locked. Your video was very helpful.
OMG after using a Cricut for awhile and now using this, there is so much to learn. THIS VIDEO was the most important so far !! LOL
Thank you so much for this! I was wondering why I had to keep pushing my blade down and it was all over the place! Thank you again
I just unboxed my new silhouette a few days ago, I couldn't find this info anywhere, including downloaded manual. Silhouette should have you on their payroll. Thank you!!!😃💎
Wow!! Been trying to figure this thing out forever!!! I did not have my blade in correctly! Ruined so much vinyl. Thank you!!!! Your an angel!!!
Thank you so much for this video. What I don't like about the Cameo so far is the lack of instructions.
Thank you so much! My blade was cutting all weird, and I didn't have it locked in properly! You video helped so much!
oh wow thank you!!! i needed this video after spending a good 3 hours trying to troubleshoot
This was so helpful...I'm not new to the cameo cutters, However, my brand new cameo 4 plus is sending me up the wall. I've cut two mats already UGH !!!!I never heard the click to seat the blade properly in the holder. This video was quick and to the point.
I am so new to the silhouette Cameo. This is so helpful....just adding...the grooves are also referred to as key ways...
Saved my wife some time and hassle. She had not locked her blade in place. THANK YOU
Bought my wife one and this video helped me. Thanks
I have seen so many help videos for Silhouette, so frustrating that they do not explain use as clearly as you do. Thank you!
Glad it was helpful! :)
They should really add this tid bit of information in the set-up guide. Thank youuuuu!
So helpful!! I had no idea you can pull it out to fit it in place. I thought it was maybe broken for a week. Thank you!
Thank you SO much, I was not clicking the blade inward to lock in place. Problem solved thanks to you
So helpful! I was trying to troubleshoot all day.
You are so awesome ! My blade wasnt locked in place by pushing inwards and it was messing up all my cuts ! Thank you !
I was getting so frustrated, I couldn't find anything to explain this. Thank you so much!
Same here! They make it so confusing on the website they send you to.
Thank You.... I did not want to force it down but that is exactly what it took to lock in place.
oh my god, thank you so much! I didn't know how to put the blade in correctly. But now i physically heard it :D
Thank you so much for being such an angel!!! This is what I needed.
I learned a lot from your videos, thanks
THANK YOU. None of the other videos demonstrated this. I thought I was going to get cut or destroy the machine doing it myself.. :(
I cannot thank you enough for posting this!!!
Lord sweet baby Jesus thank you!! I thought I was illiterate doing things wrong! I’ve had my
Cameo 4 plus for about three years and was blaming the blade being broken every time :,) when all i had to do was clip the second step! Thank you thank you thank you!
Great video! Very helpful. I have used a Cricut (the older versions that took cartridges) and a Pazzle but not the Cameo. But I am excited to try out my new machine!
Thanks that was really helpful!
Super helpful!! Thanks so much for sharing this.
This was so helpful!! Thank you!!!
Okay first off........ WOW didn't know how to do that at all. Thank you very much!!!! May I ask a question please? Do you know any videos on cutting poster board stencils and or multi stencils? Please and thank you!
It was great however i wish at the beginning you addressed that the holder was in the open position i didnt realize pulling out and pushing in locked and unlocked it almost broke it trying to shove it in not relizing it was closed... but thank you for the rest of the information it was helpful
Thank you so much! I couldn’t figure out why my cameo wasn’t cutting!
Omg thanks so much! I was on the verge of just giving up on it 😩
You got this!
Dina Schliecker thanks so much!
Omg this was so helpful!!! I have been inserting the blade completely wrong and was going to return my Cameo 4 because I thought it was defective. I’m new to this and thought the blade was common sense. 🤦🏻♀️ Can you help me understand what the numbers 10 to 0 mean?
I'm glad you found it helpful. :) The numbers indicate the depth of that specific blade. Manual (or may be referenced as ratchet) style blades are typically 1mm max with the exception of the deep cut blade. That is a 2mm max. They've done better labeling blades but there are so many it can still be confusing. Just remember - autoblades adjust the depth per the software settings; manual (ratchet) blades you must manually change the blade depth before inserting into the holder. This link may help you identify newer tools that weren't available when I recorded this video. www.silhouetteamerica.com/shop/blades-and-mats
Thank you so much I’m new and I was so confused but you cleared it up
Thank you! I was worried because my cameo didn't come with any printed instructions and I was afraid of messing up the placement
Very helpful! Thank you!
Thank you so much , I am now starting and this was helpful.
Yes simple and easy.thank you for the information.
It was so so helpful thank you
I'm so glad! :)
Thank you so much! Simple and easy to follow!!
Hi, thank you for this video. Do you know how to use a replacement auto blade that does not have the flat back? It's the only kind that Silhouette offers now and my machine doesn't seem to read it without the smart metal chip in the back of the flat version.
If you are using a manual blade of any type (no smart metal piece on blade) then you must change that in the software for the machine to cut. You can do that on the Send screen. From the choices available, be sure to choose the manual option. Be aware you must also adjust the blade depth manually. There's a round spot in the front (left) of the machine that you use to change depth.
Hello thanks for the great video I have a question I think my machine might be broken. This is what's happening when I do the test cut for example if I do a test cut at 2 and then do the actual cut the blade won't reset and it will add on 2 taking the blade to 4 is the blade supposed to reset by itself because I have been manually resetting the blade every time I do a cut
That's definitely not normal behavior. It's possible the blade carriage isn't hitting the correct spots when adjusting the blade and needs reset. Turn the machine off and then manually move the blade carriage along the bar right to left about 5 times. Then turn it back on. Also, double check that the cap on the blade is screwed on fully. I've seen a lot of issues resolved by that simple fix.
@@bakedonmaple1196 thanks I'll give it a try
@a Benny B. Design, I have the exact same issue. Did you fix yours?
@@jackiesweet4941 I had to return and get a new one
Thank for this video .it very nice explain .I have problems in during the cutting design.I have cameo 4 buy recently.my machine not cutting on design edge line .it cutting out side of edge line.what can do about it can you tell me any suggestions.thank you.
:) Glad you found it helpful. Can you please explain more of what you are cutting? Is it vinyl? Print and cut for paper project?
@@bakedonmaple1196 I am cutting IDT paper. For logo print on t shirt
@@anoopkotwale807 aaah ok so it sounds like you are using print then cut with registration marks. It's a little buggy right now in the 4.3 versions. The biggest thing to remember is your page setup in Studio needs to match your printer setup. Verify that your orientation for both the printer and your project are the same - portrait/portrait etc. Then be sure your media size is set to Printer in your page setup panel.
@@bakedonmaple1196 yes I understand .. thank you.😊
Hi Dina I'm very new to this. I received my Cameo 4 as a gift and I cannot get it to print. I feel like I have tried everything. I turned it off and turned it back on and manually moved the carriage
. I have made sure the cap on the blade is tight and I have made sure the blade is snapped in correctly. I am so frustrated!
I was running myself crazy THANKS!!!!!
Hi Dina, Thanks for the information. I have one question: that 10-0 is about how deep the Cameo cuts, or? If so - do I have to adjust it in on the blade as well as in the Software? Or not at all?
Hi :) yes, that is the blade depth for that particular style. There is a deep cut blade that goes up to 20. In terms of thickness... 10 is for items up to 1mm thick; 20 is for items up to 20mm thick. But I do caution using the blade at full depth for long periods or really thick materials (such as thicker chip board) may not be the best option for cutting thicker materials. The blades tend to get stuck and chew up the items being cut. I'd suggest a graduated cut starting on a lower depth and increasing the depth as you make additional passes. It may take some testing to find out the right depth and number of passes needed to cut all the way through.
If you are using the autoblade, the software settings are used to make the adjustments. This is the extra tapping at the beginning of your cut jobs. If you are using a ratchet/manual style blade, you must physically adjust to the desired depth, change the blade type in the software to ratchet/manual and then send the job to cut.
@@bakedonmaple1196 thank you 😊
The blade I bought that says silhouette auto blade, is rounded and longer than the one that came with my machine. Did I buy the wrong one? It was the only auto lad for silhouette in the store. I can’t figure out how to lock it in.
Thank you for the video, I am completely new to this. What are the adapters for?
The adapters enable you to use other tools such as the black/blue ratchet blade, sketch pens/pencils etc and have them recognized correctly in the software for appropriate material cut settings. :)
good job. great video. but I found out the cap surrounding the blade can also be loose! I had to turn it until it was fully seated, so you might want to re do your video and show how that can be a problem too. arrgh.
thanks for the video. starting my own shirt business
You're welcome. :) Best of luck with your new business endeavor!
Great video. Very helpful, thank you!!
Wow Thank you this may be so sample but new like me don’t know Thank you for sharing 😍🥰🥰😗
hi, if i want to cut art paper to make rhinestone template, what blade should i use? the art paper is like 180gsm
I'd use the cover stock material setting which is for thicker card. Do a test cut to be sure the settings will work for your needs. If the cuts are not going all the way through the card, increase the force by 1-2. If it is cutting into the mat, decrease the force.
Dina Schliecker do i need to use the blade or kraft blade?
@@fahrultajien5916 You can use the regular blade for paper cutting. The kraft blade is not meant for intricate cuts or cuts with sharp turns/corners. I've not found it very user friendly especially with all the extra steps that are needed to even use it in the 2nd tool holder.
Can you help me with the replacement part for the lock? It is broken.
Thx this was very helpful
I just got my cameo 4. I inserted the autoblade correctly and locked into place correctly. But the silhouette studio still says no tool detected... what do i do??
Hi Dina, which position should the blade be in before I click send and the blade adjusts automatically? 0? Does it matter?
It shouldn't matter as it resets the blade to zero before adjusting to the blade depth software setting. :) You'll hear one long click for the reset and shorter clicks to adjust the depth.
Thank you so much for this video!!!!!!!!
Does the blade height adjust automatically through the software?
Sure does! :)
I'm not having trouble with the blade, but for some reason my Cameo 4 Blade House gets stuck and then makes a woodpecker sound. I can't find any help anywhere on it. I'm so frustrated
That's frustrating. Tell me more about what you are cutting - material type? what are your cut settings - blade depth etc.
@@bakedonmaple1196 I'm cutting cardstock. About 3 cut, 20 force, 2 passes. 😁
@@JeanieEllis1953 Hmm those are close to mine. blade is 3, force 24. You may have done this, but be sure all the tape and packing material has been removed from the inner portion of the machine. If that is all fine, look at your mat after the cut. Is it lightly scoring it (normal) or is it deeply etching or cutting into or through the mat (not normal)? If it is the latter, reduce your blade depth and increase your force by 1-2 and increase your passes by 1-2. Also check the blade for debris especially inside the cap. If the blade cannot move freely due to build up inside the blade cap it cannot move properly causing poor cuts.
@@bakedonmaple1196 I will definitely try this. Thank you for your help! I will let you know if it worked. xxx
Thank you! newbie here, very helpful!
Will you please do some beginner videos
hi what blade and settings to use if I am cutting magnetic sheets that is 1mm thick. Thanks
I'd start with the pre-defined settings in the software for magnet sheets, adhesive and do a test cut first. if the test cut works without issues, run with it. :) You may need adjustments depending on the brand of magnet paper you are using. If that's the case, make the adjustments and save as a custom material cut setting. :)
I have the new cameo 4 rotary blade. I can only get it to do a test. When I hit sent, the blade does not touch the fabric but goes all around like it is cutting. The blade is out as it should be. Any suggestions would be greatly appreciated.
The higher force blades are still a bit buggy in terms of software settings and the workflow is quite clunky. Ensure the blade is inserted fully and locked in place. Then be sure you're selecting the 2nd blade option in the software for the correct cut settings. Your cut lines should be blue instead of red.
What is the second holder for?
I received my cameo 4 plus yesterday and the blade is not cutting? I have tried everything on your video?
Some people have received defective autoblades. 1st, ensure the cap is secure and tightly screwed into place. You can verify the blade changes settings appropriately with manual testing. Be careful not to poke yourself with the blade. Use your thumb and make a long press on the bottom of the blade up into the housing. This will reset the blade to zero. Shorter presses will advance the blade depth. If that works, the blade is functioning properly. You can also inspect the blade for any damages such as cracks in the housing. The only other thing to verify is that your cut lines are active on the Send screen and you have selected the appropriate material/cut settings.
Dina you’re a life saver lol. I wasted like 3 sheets of vinyl cause I didn’t click the damn blade in 😭 thank you for this tutorial
Does the blade that comes with it… go with the machine??? My blade not going in either hole???
Yes. The cameo 4 has a flat backed blade with the metal piece on it. No other versions are like that. Make sure you've got the correct blade. They're labeled 1 & 2. Silhouette updated the blade colors and names recently. It could be labeled as A & B. Here's a good matrix that shows what blade works in the various machines. www.silhouetteamerica.com/tools
1/A is the main slot on the left. The right holder is for special tools like the rotary blade and the punch tool. If you look closely at the blades you'll see the grooves are different. Align the grooves with the slot in the blade holder and it should slide into the holder. you may need to give it a little push to click into place. There should be no gaps. If there are, it isn't seated fully and will not adjust correctly causing poor cuts.
So... I have used this once and seemed.great.. now after a few months .. I am sending my design to cut.. it starts then spits it back out.. checked blade it is in.. I know this is simple but I NEED HELP PLEASE!!!
My blade seems to be in correctly..locked in place. But the green dot is partially blue and I am having to crank up the settings drastically to get a cut. Any suggestions??
Are the locks fully in place? It almost sounds like it isn't fully pushed into place. When inserting the blade, hold one index finger under the lock lever. It should click in place. Then push the lock lever fully towards the blade until it clicks in place. You can also check to be sure the blade isn't damaged. With your finger, carefully press the blade cap up until it clicks. A long press will reset the blade to zero. A short press will advance the depth exposing more of the blade. When fully exposed, you should see a sharp angle. Inspect for a broken tip or chip on the blade. Also, some blades have a crack that doesn't allow proper depth changes. Check around the blade cap (where you press to adjust depth) and look for cracks or other defects. I also find that I need to increase force by 1-2 and sometimes blade depth by at least 1 on the default material settings. My custom cut settings have worked great though! :)
I thought this was a great video; one recommendation is to show that if the blade does not go all the way down its because the carriage holder could be in the 'locked" position. This took me a while to figure it out.. but overall a great video!
Sheri Kord: what do you mean by carriage holder? I'm having trouble with mine and wondering if this is why?
carriage holder = blade holder. There is a lever in the front of the blade holder that pulls out/pushes in to lock the blade in place.
You are a lifesaver 😁
I can not insert my new Cameo 4 rotary blade. It will not click in all the way. Is there a video to help me?
OH MY GOD YOU SAVE MY LIFFFFFFEE !!! THANK YOU RUclips !!!!!!!
Everything s good my blade s new but still its leaving some cut lines open how does it happen i never had problems before
There is a version that was released with a cutting bug that left gaps in the cut lines. If you are using an older version you may want to look into one of the newer 4.3 or 4.4 releases.
@@bakedonmaple1196 i got the latest update already
I’m a newbie to this and I was trying to take out my auto blade and check it but it seems as though it’s jammed in
Make sure it's unlocked first. Pull the lever out toward you. When locked in place, the dot on the handle is blue. That's how you know if it is locked/unlocked.
Yes ma’am I pulled the lever outwards I’ve gotten it up just a little by using things to get it to come out but no luck