Thanks bro I didn't see this at first and I needed to make something using waste materials too a I was searching and all the other projects wre very hard and the things were hard to find and I found this this os so easy thank you very much bro
hey my propeller blades are uneven means one blade is bit big and other blade is bit small, and vacuum cleaner is not working it's niether giving air nor creating suction. Can u pls advice me?
Bro one more question plssss 😅😅 I m making a drone now my question is which matterial should be best of structure of drone to fix Example - others are making drone with ice cream sticks And also one important questions 😅😅😅😅😅😅😅😅😅😅😅😅 Which motor should be the best to fix in drone . And also tell me that motor which is in my budget \ cheap Pls if you don't mind then ans my Question. Plssssssss 🥺🥺🥺🥺🥺 Pls don't mind If you are angry then I m telling sorry to you..........😊 but pls ans my question Have a nice day!!! ❤️❤️❤️😉
@@DAVDANLIFESTYLE1320 bro!!!! I made a drone ( non remote ) but my drone is not stable!!!!!!!!! Means whenever I m flying the drone its going opposite and digging the ground ......... Haaa!!!!!!!😭😭😭😭😭😭😭😭 Pls Plss Plsss It's urgent next day of tommorow, i will submit my drone to school teacher and also I have made by own it was very difficult but...... Pls what to do sir to stable the drone I made the drone without remote Plsssssss sir youtuber Which material should be required to stable the drone And also pls if you can then tell me the cheap one pls sir plsssss
Bro i have some questions about this gadget • can we make it in a size of container •how it works with a small fan , does the motor is powered • bro I made it but my dusts are going far what to do ,,and also tell me the science of your project •can we attach all the gadgets with a Gum or Quick gum. Or A tape Because I don't have any hot glue gum. Bro pls ans my questions for my school project Bye bye 😁😁😉
* Yes bro, we can make it bigger in size of a container but the motor and fan capacity also needs to be more then. * Please check if there is any gap in the container and the science is based on suction due to air pressure * Glue gum is quick and effective to paste but still u can use other adhesive if they hold good
Step 1: Open the dc motor Step 2: You can find 2 flat copper plates covered by a white piece Step 3: take out the white part Step 4: Extend the copper plates and close the motor I hope these steps will help you if not you can explain the issue in detail 🙂
Thanks bro I didn't see this at first and I needed to make something using waste materials too a I was searching and all the other projects wre very hard and the things were hard to find and I found this this os so easy thank you very much bro
I am happy for your inspirational words
Hi brue
Hello
Thank you bro my school exhibition project send money in 85 rupees thank you 👍🙏🙏🙏
Thankyou bhaiya apki bajah se mera project ban gya
🎉😊🎉
Thanks a lot bro.....🙏 I wanted this type of model for my physics project. This is suberb.......👌👌👌
Most welcome 😊
i tried this... but the particles didnt suck.. instead it leaves air.. just acts like a blower.. can u correct this
Bro you need to put holes at the bottom of the container so that vacuum effect will be created.The time is mentioned in 1:06
super bro. Thank you👌🙏
Good thing about this video is the main material i.e the plastic container is easily available and easy to make as compared to other videos
Thanks
You are very cool bro thos is help me in my school thankyou
Glad to hear that
Thankyou fir replying 😊😊
Hi but it doesn't take the paper inside it. But it is good 👍👍.❤❤
Nice 👍
Op bro this is working my school project is completed 👌👍
Happy to hear bro, Thank you🙂
Live you bro
It's very, very good and super
Thank you very much
Can u pls make a list of materials u used?
Sure..
1)Small plastic container
2)plastic pipe
3)plastic fan
4)DC motor
5)9v battery
6)switch
7)connecting wires
@@DAVDANLIFESTYLE1320 thanks
Fan any bottel mini motor and rod or a pipe
Excellent. Very fine.👌👌👌🌷🌷🌷🌷🌷🌷🌷🌷🌷🌷🌷🌷🌷🌷🌷
Very good effort dear 👌👍
Bro very nice my school progeat complete 👌👌😙😙💙💙
Happy to hear bro thankyou
It is project not progeat gadha tum toh study mat he karo toh accha hai
Supper love u bhai ❤❤
Thank You
make pinball
1)Bro why dust are not coming 😅
2) other youtuber can fix the moter other side
3) how will create vacuum can you explain
The holes in the backside will create a vacuum effect
hey my propeller blades are uneven means one blade is bit big and other blade is bit small, and vacuum cleaner is not working
it's niether giving air nor creating suction. Can u pls advice me?
You can change your propeller
ok
@@DAVDANLIFESTYLE1320
i did that too but still not working ...but anyways thanks for suggestion
Can I do this with any plastic container such as earbuds container
If the size of the container is bigger than the size of the propeller, then you can use it
Bhai app ne wire ko postive se nagative joda ya positive ko positive se joda fan Ava samne de raha hai ya piche ki aur
Brother In this motor there is no positive or negative you can connect any of the side
Bro one more question plssss 😅😅
I m making a drone now my question is which matterial should be best of structure of drone to fix
Example - others are making drone with ice cream sticks
And also one important questions 😅😅😅😅😅😅😅😅😅😅😅😅
Which motor should be the best to fix in drone . And also tell me that motor which is in my budget \ cheap
Pls if you don't mind then ans my
Question. Plssssssss 🥺🥺🥺🥺🥺
Pls don't mind
If you are angry then I m telling sorry
to you..........😊 but pls ans my question
Have a nice day!!!
❤️❤️❤️😉
You can use ice stick as it is lightweight and you can use DC 3.7 volt coreless motor
@@DAVDANLIFESTYLE1320 bro!!!! I made a drone ( non remote ) but my drone is not stable!!!!!!!!!
Means whenever I m flying the drone
its going opposite and digging the ground .........
Haaa!!!!!!!😭😭😭😭😭😭😭😭
Pls
Plss
Plsss
It's urgent next day of tommorow, i will submit my drone to school teacher and also I have made by own it was very difficult but......
Pls what to do sir to stable the drone
I made the drone without remote
Plsssssss sir youtuber
Which material should be required to stable the drone
And also pls if you can then tell me the cheap one pls sir plsssss
Much needed 😁😁😁😁😇😇😇
Make lamp
Awesome Daniel
Bro i made but the dusts are leaving what to do sir.
The holes should be put proper at the back to create a suction effect
Thanks For Video.This Really Works.It Helped In My School Project.It Is Very Useful.😃👍
Thank You Very Much 🙂
Ffcvvgc CT hhr
Dust nahi saaf karega kya
Small particles can be cleaned using it
Bro i have some questions about this gadget
• can we make it in a size of container
•how it works with a small fan , does the motor is powered
• bro I made it but my dusts are going far what to do ,,and also tell me the science of your project
•can we attach all the gadgets with a
Gum or
Quick gum. Or
A tape
Because I don't have any hot glue gum.
Bro pls ans my questions for my school project
Bye bye 😁😁😉
* Yes bro, we can make it bigger in size of a container but the motor and fan capacity also needs to be more then.
* Please check if there is any gap in the container and the science is based on suction due to air pressure
* Glue gum is quick and effective to paste but still u can use other adhesive if they hold good
@@DAVDANLIFESTYLE1320 thankyou broooo so much !!!!!!
Wow super 😮😮
Thank you so much
Bro yrr mera to dust ander khinch hi nhi raha hai
Can you please type in English
Op bro my school miss super innaga
Happy to hear bro
👏👏👏👏
👌
🔥😎👌
try to use cooling fan or turbine blades,this will generate much vaccum
Thanks for your suggestion 🙂👍
Thanks 👍👍
Super 🔥
🤗
How much rupees
Making charge
9v battery 35rs
Motor 15rs
Propeller 2rs
Switch 6rs
Connecting wires 5rs
Plastic container 15rs
Total=78rs
This is work bro
🙏🙏🙏
Super thanks my inspiration award confirmed bro...!!!
Thank you very much bro need your support
❤❤❤
Please help me
Bro my dc mortor connection had broken where we plug the wire what to do
Step 1: Open the dc motor
Step 2: You can find 2 flat copper plates covered by a white piece
Step 3: take out the white part
Step 4: Extend the copper plates and close the motor
I hope these steps will help you if not you can explain the issue in detail 🙂
S it worked
Kollaaam
Tape name
Double side tape
@@DAVDANLIFESTYLE1320 thanks bro
மை ப்ராஜெக்ட்
Mudddddddddddddddddy not came
It will work.You might have done some step incorrect
Not working project
Try it correctly
Long vedio
❤❤❤❤❤❤😮😮😮😮😮😮😮😊😊😊😊😊😊hdjdgerdyrndhfyueyr7ddddydisgsi8s6ehejeuehshd65e53ekekeiegfwugwg7eej
Waste and not working and it is also not so powerful
It will work if you follow the steps correctly
Tommarrow sumbited
It's just a lie. I tried it more than three times in different ways, but it didn't work. Don't try it!!
It will work if you follow the steps correctly
Its all fake
It will work. you might have done some step incorrect
😢.ക
@
Not working 😡😡😡 fake
Isme heart dene ki kya zaroorat hai 😡😡
@@k-man1663 You might have done some step incorrect
Bhai tu pagal hai teri wajah se mera paisa babad ho gaya
How much rupees
And make a list please reply
Sure..
1)Small plastic container
2)plastic pipe
3)plastic fan
4)DC motor
5)9v battery
6)switch
7)connecting wires
150Rs