DT Swiss Road Rear Wheel Bearing Change
HTML-код
- Опубликовано: 11 сен 2024
- DT Swiss R20 DiCut rear wheel bearing change. This will also help if you have a R23 Spline, R32, R21, R24 road wheels with the pawl hub.
If you find the videos helpful and would like to make a small donation to help support the channel you can do so here: paypal.me/free...
Buy me a coffee
www.buymeacoff...
Instagram: www.instagram....
email: info@freetocycle.co.uk
Thanks for watching.
Thanks for that vid. Done lots of hubs but just could not work this one out, could not believe that the bearing was designed to come out of the hole without removing the ratchet teeth. Cheers..
Great info I was thinking I had to remove the lock ring, but the bearing just clears it. Thanks : )
New subscriber, thanks mate!
Again great information , thank you.
Thanks a lot fo the video! Could you please privide the bearings size also?
The bigger one is the 6902rs, the non drive side is the 6803rs?
Thanks a lot in advance!
Just checked, ao drive side 6902rs NON drive side 6802rs
Nice job mate this is really helpfull pretty strait falword job but its nice to know exsactly how to do it
How do I pop out the old bearings when the axle sits pretty damn tight? Cheers :)
Great video, as usual, thanks!!!
My R20 free alu hub housing seems to be damaged from the cassette eating into it, have you ever replaced the housing? I've heard of people changing it with steal free hub, what do you think??
The Aluminium Dt freehub body’s get marked easily from the cassette, you can file the marks down if they become a problem. I’ve never replaced a freehub because it has marks on it from a cassette, you would have a buy a complete replacement body.
Great video thanks for posting.
My spacer is stuck on the axle for some reason, thus I can't knock out the non drive side bearing with the axle.
My thoughts are to use penetrating fluid or pour boiling water onto the spacer and see if it will free up.
As a last resort, cut it off with a Dremel.
Have you got any suggestions as to how to get the dam thing off?
Cheers
Jonathan like you said soak it overnight. It maybe stuck because it’s worn a groove in the axle itself.
What size is the socket you're using there?
17mm and 20mm for the bearings.
@@FreeToCycle Cheers👍
Hi, do you have any video where we can see how you extract the bearing without removing the toothed ring?
ruclips.net/video/ObD2tr4_ZUc/видео.html
Thank you very much.
Plss help.i have a r24 spline and i need to know what is the bearing number the small one?is that 6802?thank you so much
6802rs
@@FreeToCycle thank you for reply sir.godbless..
the ticking (paws inside the hub) is loud on R23 Spline. Can I add 20-30weight oil? thank you for posting.
The freehub uses DT Swiss grease on the pawls there is no oil in the hubs!
@@FreeToCycle is there anyway of lower the tic tic tic volume?
No not that I’m aware of!
for r32 db disc centerlock rear and front what bearings i need?
Wheel bearings 6902 x 4
What is the rear non drive side bearing size? THX.
In this wheel it was a 6802 but it varies with different models.
Wat is the rear drive side bearing size?
sea sky need to know the same thing.
sea sky 6902rs