Its kinda tight, i was able to press the lock then pull, try changing the top sensor 1st, that might fix the problem, the upper sensor is the one sending signal to control the air fuel mixture, change the upper sensor 1st if your having disconnecting the buttom part. The space is so tight. Just locate the lock and press then just pull the cable.
Check your MAP sensor first try cleaning it or just replace it, then replace the O2 sensor the up stream first because the downstream the wire harness is very difficult to detach. So i would change the upstream 1st, that might might fix the problem. And check for vacuum leaks.
What brand of Anti sieze did you use? I'm struggling to find the right one
tread magic anti seize. you can buy that in any automotive supply
AGS Thread-Magic Anti Seize Lubricant 0.14 oz. a.co/d/gYcgCVh
@franzroyo4900 thank you
How did you reach in there? Im having the same issue but i can’t reach without taking out the bottom radiator hose 5:42
Its kinda tight, i was able to press the lock then pull, try changing the top sensor 1st, that might fix the problem, the upper sensor is the one sending signal to control the air fuel mixture, change the upper sensor 1st if your having disconnecting the buttom part. The space is so tight. Just locate the lock and press then just pull the cable.
How did you reach in there? Im having the same issue but i can’t reach without taking out the bottom radiator hose
bro you gotta take themusic out
Is this the downstream or the upstream sensor?
both
Does this also work for a P2096 code?
Check your MAP sensor first try cleaning it or just replace it, then replace the O2 sensor the up stream first because the downstream the wire harness is very difficult to detach. So i would change the upstream 1st, that might might fix the problem. And check for vacuum leaks.
@@franzroyo4900 I cleaned the map sensor and changed the upstream 02 sensor but still having a little high rpm/ being hesitant
@@JoseLopez-nz3co when you try to rev the engine does it hesitates or shake?
How did you get the plastic valve to unclipped from that rubber ribbed line..
Does this work For p2097
@@John-w3g6f yes
Hopefully you learned not to blast music like this in future videos. Otherwise, nice job