SQlab Innerbarends - Unterschiede und Montage

Поделиться
HTML-код
  • Опубликовано: 16 дек 2024

Комментарии • 29

  • @dvd6997
    @dvd6997 4 месяца назад +2

    With how many degrees of inclination are they placed?

    • @SQlabGmbH
      @SQlabGmbH  4 месяца назад

      The innerbarends are adjusted according to your personal preference. As with all bike settings, it is not possible to give a specification.

  • @donricardo4750
    @donricardo4750 2 года назад +2

    Habe die Griffe (411) gerade montiert. Folgende Anmerkung dazu...In der Anleitung sollten die genauen Krümmungen ( rechts/links) gezeigt werden, damit man nicht versehentlich falsch herum montiert. Es fehle auch Angaben über die Position, wie weit nach vorne sollten die Griffe stehen, welche Empfehlungen gibt es.

    • @SQlabGmbH
      @SQlabGmbH  2 года назад +1

      Hi! Vielen Dank für dein Feedback, wir werden es uns definitiv zu Herzen nehmen!

    • @PaniMarziPan
      @PaniMarziPan Год назад

      @sqlab da kann ich donricardo4750 nur zustimmen!

    • @djsupersoul1010
      @djsupersoul1010 6 месяцев назад +2

      Du musst sie so montieren das sie nach außen zeigen und den Helm verkehrt rum aufsetzen dann ist es perfekt!

  • @tobiasgeiger6366
    @tobiasgeiger6366 2 года назад +3

    Thank you for the video.
    Unfortunately, the SQlab 411 innerbarends do not fit properly with Shimano XT-brakes. More precisely, when you want to mount them between grips and the brakes, you can only do so by mounting them pretty steeply on the handlebar, since moving/adjusting them is very limited due to a small distance holder of the XT-brakes.
    Any suggestions/solutions here?

    • @SQlabGmbH
      @SQlabGmbH  2 года назад

      Hi Tobias,
      for certain Shimano models (XTR BL-M9100, DEORE XT BL-M8100, SLX BL-M7100, DEORE BL-M61009), the innerbarends need to be installed flush with the handle and right/left of the end of the balance tank.
      For the further assembly of the armatures and grips on the handlebars, please observe the assembly and safety instructions provided by the manufacturer.
      We hope this helps.

    • @tobiasgeiger6366
      @tobiasgeiger6366 2 года назад +3

      @@SQlabGmbH Thanks for the reply.
      That´s how I`ve finally mounted it.
      It comes with a disadvantage though, since it keeps the brake additional 2 centimeters away from the handle. That can create some problems reaching the short 2-finger brake lever, especially when you have smaller hands/shorter fingers.

  • @davidrowe8747
    @davidrowe8747 4 года назад +6

    Thank you for the subtitles (for us lazy English people who can only speak one language!)

  • @andrewstroud782
    @andrewstroud782 2 года назад +1

    The concept is very good and the bar ends are very comfortable. However, because they are so short there is the possibility that anything else which is located on the handlebars can affect the hand position. I found that locating them next to SRAM Gripshifts placed the palms on top of the shifter housing and cramped the hand.

    • @SQlabGmbH
      @SQlabGmbH  2 года назад

      Hi Andrew, thanks for your comment and for reaching out to us. May i ask you to support our customer service to help with your specific problem. shop@sq-lab.com is the contact. Thank you

  • @itzikca
    @itzikca 2 года назад +1

    I saw people install the innerbarends after the brakes instead of between the grip and brake, which is better ?

    • @SQlabGmbH
      @SQlabGmbH  2 года назад +1

      Hi, we recommend you to install the innerbarends between grip and break.

    • @worldexplored5300
      @worldexplored5300 Год назад +1

      Brake guys...not break ;)

    • @itzikca
      @itzikca Год назад

      @@worldexplored5300 right 👍😂

  • @b75723
    @b75723 3 года назад +1

    Some user's reviews on bike24 say it's not compatible with xt brakes or st-ef65 shifters, unfortunately I can't ask the authors what do they exactly mean so could you suppose why they say it? Probably they should just left some space between?

  • @jakubd3426
    @jakubd3426 2 года назад

    Only 710/702 grips have this removable clamp? Can i remove it in 70X? I`ve got 410/402 innerbarends and without inserted part of the grip they move around and have not enough catch on the bar.

    • @SQlabGmbH
      @SQlabGmbH  2 года назад

      You are able to remove the clamp of the 7OX grip aswell, but the 410 Innerbarends will not fit on the 7OX grips. But there will be new Innerbarends which will fit with our performance grips soon. :) have a nice day

  • @john_casey
    @john_casey 4 года назад +1

    Lässt sich die Klemmschelle beim 711 auch entfernen? Ich würde den gerne mit Innerbarends fahren, aber die Kombi ist echt grenzwertig für 2-Finger-Bremshebel. Ich suche nach einer Lösung, die Bremse näher an den Griff zu bekommen...

    • @SQlabGmbH
      @SQlabGmbH  4 года назад

      Hi John, leider nicht. Nur bei den 710 Griffen ist das mit den 410 Innerbarends möglich. Bei den 711 Griffen muss die Klemmschelle dran bleiben.
      LG

  • @m.3372
    @m.3372 3 года назад +1

    Ich hab die "handfest" angeschraubt. Reicht das? Habe keinen Drehmomentschlüssel

    • @SQlabGmbH
      @SQlabGmbH  3 года назад

      Hi Maik, der Begriff "handfest" ist sehr dehnbar und daher können wir Dir nur mit dieser Information keine Garantie auf optimalen Halt geben. Am besten besorgst Du Dir einen Drehmomentschlüssel oder fragst einen Händler in Deiner Umgebung, ob dieser Dir die Innerbarends montieren kann.

  • @piotrczajkowski5050
    @piotrczajkowski5050 4 года назад

    Which setting do you recommend for normal person, light touring? 710
    grips and 411 innerbands? Is this safe setting. Or 411 innerbands with new Subby grips? Or double horns look bad or work bad?

  • @itzikca
    @itzikca 2 года назад

    Will the 410 fit on a KTM Comp Ergo Lock grip ?

    • @SQlabGmbH
      @SQlabGmbH  2 года назад +1

      Yes, it fits. 👌

  • @mirellamarshmallow2588
    @mirellamarshmallow2588 3 года назад

    Hallo, kann man die auch ohne Drehmomentschlüssel, mit nem normalen Werkzeug dran machen? Möchte nur dafür jetz ungern n 40€+ Werkzeug kaufen oder wegen so ner Kleinigkeit auf nen Termin in ner Werkstatt warten...

    • @SQlabGmbH
      @SQlabGmbH  3 года назад

      Klar, kann man auch mit Gefühl mit einem ganz normalen Imbus montieren. Liebe Grüße

  • @doncorona1851
    @doncorona1851 2 года назад +2

    mit Badeschlappen auf der Arbeit🤣.