Şu videoyu 10 yıl önce izlemiş olmak isterdim. Evde çekmeyen telefon sorununu da wi-fi araması ile çözüme ulaştırdım. tüm odalarda rahatça gezerken internet ve telefon görüşmesi kesintisiz olarak sağlanıyor. Teşekkür ederim.
Do we need to connect two router to each other to use ethernet backhaul or we can just connect two routers sepearately from each other to our modem to use a ethernet backhaul, also can we use a wireless backhaul?
Good video. Question is this. I currently have LAN setup throughout the house. You mentioned connecting to the WAN point? Should I be connecting the 2 routers via my LAN points instead?
For conecting them by wire, it will need to mesh them as you did by pressing the button? Or they mesh automaticaly when conecting the cable, in the case where you have the cable between the 2 zones already. I guess they also have a dedicated app for managing them like tplink deco does?
No need bro, if you have set them up wirelessly and you realize that you need to use cables, just cable them both as they already configure itself, they also have “huawei ai app” to manage it. I did not show it here because I just wanna show how easy it could be setup for mesh network.
I have two of these connected and I also have a ws5200 WiFi 5 huawei router all connected via cable. But my phone tends to stay connected to the older WiFi 5 router. Any ideas ?
Sir., should i change my original pldt router to this AX3 Wifi 6., or it must connect to pldt router then to AX3,, please i need you to give me some knowledge to set up this., because i already bought it the AX3 router., thanks 🙏🏼 and more power to your vlog
Bro... can do mesh with out cable? Example main router in 1st floor.. 2nd floor room got 3.. so i just wan add on another 2 but can mesh with out cable join main router? Like mesh without cable
I have this AX3 router, too. But *I'm not quite satisfied with it...* I always use it in WiFi Repeater mode. In this mode, I CAN'T CHANGE the name (and also the password) of the 5 GHz network. I don't know why it can't. Does this router not have that capability or is there something I'm missing out? Another annoying thing is that all of the settings I do(changing network name, password etc.) are gotten resetted whenever the router is unplugged, turned off(by its power button) or in a case of an outage. Does yours do the same resetting stuff? I'd be very glad if you can help.
I have a PFSense and three ax3 7200 routers. Put everyone as ACCESS POINT, turnoff the lan dhcp, ncf and set the same Link+ password and split both networks 2.4/5 all with the same. Each one of the 3 are connected on their wan. Seems working, but i can't connect via network or app - if i connect with a cable on a notebook, i can access admin.
@@jrrcats574 Same issue here. Mesh works but don't see the addon router in Ai Life app and also can't access it's webui using the main router's password
If the new router to connect to the old router as you described By this the new one will be same Wi-Fi name and password But I need to rename the new router as different Wi-Fi name and password how can I do it Thank you
Do we need to connect two router to each other to use ethernet backhaul or we can just connect two routers sepearately from each other to our modem to use a ethernet backhaul, also can we use a wireless backhaul?
Şu videoyu 10 yıl önce izlemiş olmak isterdim. Evde çekmeyen telefon sorununu da wi-fi araması ile çözüme ulaştırdım. tüm odalarda rahatça gezerken internet ve telefon görüşmesi kesintisiz olarak sağlanıyor. Teşekkür ederim.
Perfect video took me under 60 secs to get it working for my customer...... Thank bro
Excellent, exactly the info I was looking for! 😁👍🏽
Do we need to connect two router to each other to use ethernet backhaul or we can just connect two routers sepearately from each other to our modem to use a ethernet backhaul, also can we use a wireless backhaul?
Thank you so much! Worked like a charm!!!!
Good video. Question is this. I currently have LAN setup throughout the house. You mentioned connecting to the WAN point? Should I be connecting the 2 routers via my LAN points instead?
The guide is precise and straightforward. Thank you
but I have this question, Can I add a switch to the one wifi router?
Yes bruh
@@torogiprohello sir, can I make ax3 mesh to be3 because Im using be3 and I want to buy ax3 and use it as a mesh?
Thanks ! What if we plug 2 Huawei routers to the same modem/internet provider router ?
It will work as separate router.
When connecting the router by cable do they appear as a single network or it creates a second one for the second router?
They appear as a single network
Thanks!
Can you connect ZTE router with the Huawei one to form mesh or do you need two of the same Huaweis?
For conecting them by wire, it will need to mesh them as you did by pressing the button? Or they mesh automaticaly when conecting the cable, in the case where you have the cable between the 2 zones already. I guess they also have a dedicated app for managing them like tplink deco does?
No need bro, if you have set them up wirelessly and you realize that you need to use cables, just cable them both as they already configure itself, they also have “huawei ai app” to manage it. I did not show it here because I just wanna show how easy it could be setup for mesh network.
Can we add more router or only 2 are the limit
I have two of these connected and I also have a ws5200 WiFi 5 huawei router all connected via cable. But my phone tends to stay connected to the older WiFi 5 router.
Any ideas ?
Can 1 AX3 wifi router accomodate 3 floors
How many devices can I connect as mesh for ax3?
Will it establish a new wifi network name or replicate the current one if I use it as an extender for my primary modem?
Does it work between dual and quad ?
Any answers on this?
Yes , it worked with me with dual and quad . Worked even with older version of the router that only support wifi5 .. all worked together smoothly
Nice and short video. Helpful, thanks.
Sir., should i change my original pldt router to this AX3 Wifi 6., or it must connect to pldt router then to AX3,, please i need you to give me some knowledge to set up this., because i already bought it the AX3 router., thanks 🙏🏼 and more power to your vlog
Bro... can do mesh with out cable? Example main router in 1st floor.. 2nd floor room got 3.. so i just wan add on another 2 but can mesh with out cable join main router? Like mesh without cable
Is wifi 6 supported on non-Huawei devices as well?
I have this AX3 router, too. But *I'm not quite satisfied with it...*
I always use it in WiFi Repeater mode. In this mode, I CAN'T CHANGE the name (and also the password) of the 5 GHz network. I don't know why it can't. Does this router not have that capability or is there something I'm missing out?
Another annoying thing is that all of the settings I do(changing network name, password etc.) are gotten resetted whenever the router is unplugged, turned off(by its power button) or in a case of an outage. Does yours do the same resetting stuff?
I'd be very glad if you can help.
Can you move the antennas upwards? If I'm gonna buy this Im goona wallmount it and can the antenna be straight up?
No you can’t
So what if you have three of them? First one connects to your router with lan and the other two connect to the first one with wan ports?
Hi what’s the deferent between
AX3 Pro WS7206 or AX3 Pro WS7200
Is it possible to connect with lan all 3 to be mainrouter slave so that main router have 3x lan out and each slave have 1x wan inconnecting ??
I have a PFSense and three ax3 7200 routers. Put everyone as ACCESS POINT, turnoff the lan dhcp, ncf and set the same Link+ password and split both networks 2.4/5 all with the same. Each one of the 3 are connected on their wan. Seems working, but i can't connect via network or app - if i connect with a cable on a notebook, i can access admin.
With is better this huawei ax3 or the Deco mesh?
Deco mesh
Can i connect ax3 with a three pack huawei wifi mesh 3? And make mesh with all 4?
I have 6 of them working as a mesh with no problem
Can i know speed for huawei second model?
How about you connect to different router wirelessly?
It is not necessary to press the connection button on both routers, just on the main one and it works
The light on the second router is green but it only connects me to the 2.4ghz network when I am close and how can I add it to the AI life app?
@@jrrcats574 Same issue here. Mesh works but don't see the addon router in Ai Life app and also can't access it's webui using the main router's password
by the way how far from 1 router to another router ?
If the new router to connect to the old router as you described
By this the new one will be same Wi-Fi name and password
But I need to rename the new router as different Wi-Fi name and password how can I do it
Thank you
Pwede ko ba ito i-mesh sa pldt router ko? I also have huawei wifi AX3
does this method work on ax3 dual core
Yes , the same Method
what if the other router is staying red
I had the same issue, I had to reset the second router and kept them very close to each other then pushed the bottom and done in a few seconds
Can I connect 3?
You can amigo
@@torogipro 👍
Sir meron na akong dual core at planning to get 1 more ung quad version. Pwede po kaya sila ng mesh connection?
Pwede sir
And if have 4 router just plug all nextones from lan to wan and so on , Right ?
Yes amigo just make to mesh them first
How to unlock a Microsoft account with password please tell me bro
How to use each router setting under one IP address?
Do we need to connect two router to each other to use ethernet backhaul or we can just connect two routers sepearately from each other to our modem to use a ethernet backhaul, also can we use a wireless backhaul?
How about if i use tp link as main then can i use the Huawei as mesh?