Yes, I had to be a little nervous. But I was pleased with the result. From the sediment that I saved 10 months ago, I get more 150 milligrams of gold 🙂
Glad you liked it. Honestly, I still don't understand what kind of sediment it was. I only understood one thing, next time I'll need to collect all the sediment on the filter, dry it, burn it on the fire, and then dissolve it in aqua regia 😎
Thank you 🖐 There is little useful information there. I tried one thing, then another, then something else. The information is: don't give up! A lot of wasted time, bad words 😁 and in the end a good result on the scale 👌
Здравствуйте. Рад за вас,что у вас всё получилось. Мы такой материал смываем китайским Джин Чаном. В импорте каких только металлов не намешано,в отличии от советской позолоты. Дальнейших успехов в вашем творчестве
Да, пришлось немного понервничать. Китайским реагентом я пользовался 5 лет назад, один раз. Смыл золото быстро с мелких штырьков, но возник вопрос. Я получил на 600 миллиграммов меньше чем должен был. Я растворял в царе эти штырьки такое же количество ранее и было на 600 миллиграмм больше. Потом решил растворить оставшуюся медь и проверить если что там ещё, так как цвет меди был какой-то непонятный тёмный, не как медь красный. И в итоге я извлёк ещё 350 миллиграмм золота. После смывки китайским реагентом сложно понять реакция смывки закончилась или нет, медь не становится медного цвета. В общем я решил больше не пользоваться этм реагентом 🙂
@akgoldbear7669 Да, согласен. Нюансов с ним бывает не мало. Очень часто золото осаждается на основу в процессе смывки. Справиться с этим можно,но нужен определённый опыт. Всяких вам благ и успеха в делах
Hi. Yes, this situation made me nervous. I am glad that I saved and did not throw away the sediment 10 months ago. I get another 150 milligrams of gold out of it 😎
Hello brother, thank you very much for your videos I have benefited a lot from them, I have a question how to make this aqua regia how many parts hydrochloric how many parts nitric? You can tell me thank you
Aqua regia solution is 3 parts hydrochloric acid and 1 part nitric acid. For example, 30 milliliters of hydrochloric acid and 10 milliliters of nitric acid. 3 HCI + 1 HNO₃ = aqua regia. Good luck and thanks for visiting my little channel 😉
@akgoldbear7669 Brother, thank you for your answer and for your help, what is the most successful way if I want to remove nitrogen from aqua regia what is the most successful way?
It all depends on the solution frequency. If there are many different metals in the solution, use urea. If the solution is clean and there is not much of it, then the best option is to evaporate all the liquid to a jelly-like state, almost to dry, but not to dryness. In this case, nitric acid evaporates completely, and hydrochloric acid by about 60% too. You can watch my previous video, starting from the 12th minute. ruclips.net/video/KfnawhzN-Fw/видео.html
I don't understand you. What water? Filter your solution and put a beaker to evaporate all the liquid. In my previous video there is an example of how to do this correctly.
Hello. No, you misunderstood me. The first time I got 7.7 grams of gold from 2000 grams of pins. This time I got 8 grams from the same amount of pins. I am sure that I got extra gold from the sediment that I saved from the previous processing. So it turns out that from 2000 grams of pins I extracted 7.850 grams of gold 🙂
Interesting solution 🙂 Next time, if it happens again, I'll do it differently. I'll collect all the sediment on the filter, burn it all in fire, and what will be left I will dissolve in aqua regia 👌
You are spending a lot in extra chemicals if you don’t know what you are chasing. Get or make some stannous chloride so you have a better idea of what is in your solutions.
Well, what can I say?! I'm not a professional, it's just my hobby. I do it only in my free time. I learn from mistakes every day. There have been mistakes and there will be more in the future. 🙂 And I used stannous chloride, I just didn't show it in the video. If I filmed everything, every step, the video would take a couple of hours. No one would spend that much time watching videos . Thanks for watching and for your comment 🖐
Yes, I agree. I figured it out on the third day. Now I know that I need to collect this sediment on the filter, dry it and burn it on the fire. And then dissolve it all in aqua regia. I am not a professional, this is just my hobby. Every time I learn something new 😎
Look at the result, he can reuse the nitric, if you have added a lot of water to your nitric boil it back down some or add something else you want to dissolve, enough to cover the material. There's another way but you'll have to pm me somehow , or call
No, I don't. I actually use very little nitric acid, which is why I have to heat up the solutions and spend a lot of time waiting for everything to dissolve. Because of this I constantly have problems with metastannic acid precipitate. 😎 Thanks for watching and commenting 🖐
Another awesome video! Its cool to see the trial and error steps to get to the desired result. Thanks for sharing AK! Its great to have you back 🎉
Yes, I had to be a little nervous. But I was pleased with the result. From the sediment that I saved 10 months ago, I get more 150 milligrams of gold 🙂
I've had this happen many times over the last few years. Thank you. This will help me atleast get my Gold back lol
Glad you liked it. Honestly, I still don't understand what kind of sediment it was. I only understood one thing, next time I'll need to collect all the sediment on the filter, dry it, burn it on the fire, and then dissolve it in aqua regia 😎
glad to see you back doing videos.
Thanks 🙂
What a gorgeous piece of gold well done 👏
Thanks a lot. I think so too. Now I can buy a new house 😁
I am very happy that you are back
Thanks for taking the time to check out my little channel 😎🖐
You are back my friend!😊
I'm trying 🙂 cheers 🍺🍺
@akgoldbear7669 I am watching your video always brother😉😊😊
Yes, it's great to see you making videos again, welcome back.
Thank you. Thank you for watching my videos ✌
Great video and information!
Thank you 🖐 There is little useful information there. I tried one thing, then another, then something else. The information is: don't give up! A lot of wasted time, bad words 😁 and in the end a good result on the scale 👌
Здравствуйте. Рад за вас,что у вас всё получилось. Мы такой материал смываем китайским Джин Чаном. В импорте каких только металлов не намешано,в отличии от советской позолоты. Дальнейших успехов в вашем творчестве
Да, пришлось немного понервничать. Китайским реагентом я пользовался 5 лет назад, один раз. Смыл золото быстро с мелких штырьков, но возник вопрос. Я получил на 600 миллиграммов меньше чем должен был. Я растворял в царе эти штырьки такое же количество ранее и было на 600 миллиграмм больше. Потом решил растворить оставшуюся медь и проверить если что там ещё, так как цвет меди был какой-то непонятный тёмный, не как медь красный. И в итоге я извлёк ещё 350 миллиграмм золота. После смывки китайским реагентом сложно понять реакция смывки закончилась или нет, медь не становится медного цвета. В общем я решил больше не пользоваться этм реагентом 🙂
@akgoldbear7669 Да, согласен. Нюансов с ним бывает не мало. Очень часто золото осаждается на основу в процессе смывки. Справиться с этим можно,но нужен определённый опыт. Всяких вам благ и успеха в делах
Beautiful video sir
Thanks 🖐
Wow that was scary with great ending !
Hi. Yes, this situation made me nervous. I am glad that I saved and did not throw away the sediment 10 months ago. I get another 150 milligrams of gold out of it 😎
Hello brother, thank you very much for your videos I have benefited a lot from them, I have a question how to make this aqua regia how many parts hydrochloric how many parts nitric? You can tell me thank you
Aqua regia solution is 3 parts hydrochloric acid and 1 part nitric acid. For example, 30 milliliters of hydrochloric acid and 10 milliliters of nitric acid. 3 HCI + 1 HNO₃ = aqua regia. Good luck and thanks for visiting my little channel 😉
@akgoldbear7669 Brother, thank you for your answer and for your help, what is the most successful way if I want to remove nitrogen from aqua regia what is the most successful way?
It all depends on the solution frequency. If there are many different metals in the solution, use urea. If the solution is clean and there is not much of it, then the best option is to evaporate all the liquid to a jelly-like state, almost to dry, but not to dryness. In this case, nitric acid evaporates completely, and hydrochloric acid by about 60% too. You can watch my previous video, starting from the 12th minute.
ruclips.net/video/KfnawhzN-Fw/видео.html
Brother, thank you for your help, how much water should be used for evaporation to remove all the nitrogen from the aqua regia?
I don't understand you. What water? Filter your solution and put a beaker to evaporate all the liquid. In my previous video there is an example of how to do this correctly.
❤❤❤❤❤
Thanks 🖐
❤❤❤
😎🖐
❤❤❤❤🎉🎉🎉🎉
Thanks 🙂
can you do a video on silver cloride?
I have already made a video of this, I will publish it early next month. It will be silver, palladium and gold from dental metal 😎
Nice. So, if I am correct, you have recovered 15 grams total from 2000 grams pin.
Hello. No, you misunderstood me. The first time I got 7.7 grams of gold from 2000 grams of pins. This time I got 8 grams from the same amount of pins. I am sure that I got extra gold from the sediment that I saved from the previous processing. So it turns out that from 2000 grams of pins I extracted 7.850 grams of gold 🙂
Looks like iron in solution. The brown is rust. I would add a bit more nitric to clear the solution then drop the gold with copperas.
Interesting solution 🙂 Next time, if it happens again, I'll do it differently. I'll collect all the sediment on the filter, burn it all in fire, and what will be left I will dissolve in aqua regia 👌
You are spending a lot in extra chemicals if you don’t know what you are chasing.
Get or make some stannous chloride so you have a better idea of what is in your solutions.
Well, what can I say?! I'm not a professional, it's just my hobby. I do it only in my free time. I learn from mistakes every day. There have been mistakes and there will be more in the future. 🙂 And I used stannous chloride, I just didn't show it in the video. If I filmed everything, every step, the video would take a couple of hours. No one would spend that much time watching videos . Thanks for watching and for your comment 🖐
You should try filter it first
Yes, I agree. I figured it out on the third day. Now I know that I need to collect this sediment on the filter, dry it and burn it on the fire. And then dissolve it all in aqua regia.
I am not a professional, this is just my hobby. Every time I learn something new 😎
Too much nitric
Look at the result, he can reuse the nitric, if you have added a lot of water to your nitric boil it back down some or add something else you want to dissolve, enough to cover the material. There's another way but you'll have to pm me somehow , or call
No, I don't. I actually use very little nitric acid, which is why I have to heat up the solutions and spend a lot of time waiting for everything to dissolve. Because of this I constantly have problems with metastannic acid precipitate. 😎 Thanks for watching and commenting 🖐