Just what the doctor ordered .... INTERPOLATE. I had set up a mission to confirm my suspicions tomorrow. But now you've done the legwork. Appreciated. Thanks
I never have done a mission on Litchi. I didn't understand how we do it and looked complicated to me. Now with this video I have learned how to do it. It seams very easy to do it. Even I use Metric and here is Imperial. Thank you for this tutorial.
Superb, just what the doctor ordered, the whole process is a lot clearer, Thanks from NZ, it's been about 12 years since I was in good old UK and even longer since I've been in Whitley Bay. I'll be sure to take a look though the rest of your stuff.
Great video, thanks so much for making it. I've just got myself a VR-One Headset yesterday and have been looking at a few videos on the Litchi app. This is by far the best, thanks. :)
Cracking tutorial and video to boot, a great source of info for us newbies, I live not far north from where you shot that scene, we live on a beautiful picturesque stretch of Northumberland coastline and you showcased it well. keep up the good work.
Thank You! for taking the time do share info in such a clear manner, greatly appreciated. Looking forward to trying out, I suspect less editing/cutting will be required in post.
Cheers for a great tutorial Jason. So much better than Litchi's own way too brief, music sodden offering. Now I'll go see if I can replicate some of the details you've shown me... if it ever stops blowing a gale!
Hi, Great review of what could be a complex bit of software made easy. You have a new subscriber. I'm new to Litchi so I'll have to download the Mission hub for my Mac and get started. Thanks once again..
I just watched the video. Great job. However, I thought there were controls to have it pause at specified points of interest if you wanted. I don't see that control in the mission hub.
Very helpful. I'm fairly experienced with DJI GO but just started using Litchi so I can do more 1-person operation, automate flights and focus on framing, and possibly automate everything to get footage I need in one flight which is helpful when time to charge batteries and remoteness from power are considerations. To that end, few questions for you: 1.) how will focus POI frame the point of interest? Will it be middle of x/y as it looks in sample video of Waypoints course you set or at one of the the thirds or something else via gimbal pitch and heading direction? 2.) is a Waypoints mission able to be completed autonomously by the UAV, including programmed camera movements, if RC signal is lost? 3.) is there a way to adjust expo settings on app as we have for DJI GO such that we can achieve smoother pans and tilts? I'll likely do some test flights to sort these questions out next week, but I thought I'd ask here in case others have same questions. Thanks much.
I watched your video and did my first mission to circle my house. I live on an acre and there are no changes in ground altitude. I used my house as the POI and Litchi set it for 3 feet. I'm not sure why it does that but my house is at least 15 at its highest. I set the gimbal for focus POI. For some reason, the gimbal would not point down to capture my house. Can you please explain the POI height relation to the height of the mission altitude I had to set my house poi 272 to get a gimbal setting of -72 with the mavic flying at 98". Just a bit confused here. I can send you the file if you want
Great Video and very easy and helpful. I have tried it for the last few days and was able to plan several mission on my desktop with no problem thanks to your instructions and youtube video. The last couple of days I am not able to plan any mission on any desktop because when I start to create a mission the waypoint window does not pop up and when I try to left click any waypoint setting the little icon is floating all over the map.. The only way to make it stop is by clicking on the eraser icon. I have no problem creating a mission on my I pad, it works the way it should. Any help would be appreciated. Theo
Hello Jason, I notice that your Drone tuck off very quickly after you activated the mission. Now when I activate my missions it takes a couple of minutes before my drone takes off even short missions. I was wondering on the mobile device you use do you have the wifi on or do you have it in flight mode or completely turnd off.
Hello Jason. This is somewhat off topic but I was hoping you may have some ideas on how to resolve this issue. I downloaded Litchi to my Samsung S5 the other day. The various parameter settings all save such as negative elevation to -656, map radius to 32,805 etc. etc. This will be fine and work ok for the field; however, I also want to use my Samsung Galaxy Tab S which I also downloaded the application two after downloading to my S5 (along with it's purchase through Google Play). Frustratingly, I cannot save any of these settings so I can't use the 10.5 inch screens to assist in mission planning with say... for example, setting my altitude at a particular way point below 16 feet or expanding the map radius beyond 1640 feet as an outer radius limiter? It could possibly be a setting on the Tablet; however, I cannot for the life of me figure out why I cannot get the settings to save.
Hi, nice video. i em little confused about all these altitude corrections. So if you set POI drone doesn´t know where it is and what altitude is there? Example - I set up 1st waypoint 1 at 10ft, second WP will have same 10ft, but this waypoint is at location 10ft higher then place at WP1. So dron will hit athe ground or will calculate hight from GPS coordinates? If not and drone do not calculate current altitude I have to calculate every change in terrain altitude . thanks;-)
Hey Jason, I'm on a macbook pro, using Firefox and I can't seem to get the Waypoint settings dropdown menu to come up (you know where I dictate altitude, speed, etc.) Any thoughts on what I'm doing wrong?
Thanks for this. After viewing it, I went ahead and bought the app, not used it yet but will try some simple missions over the next few days before going on to bigger things. One quick question though, do you have any idea how I can get to view this mission? I've looked on the mission hub, even searched with your name and the route name but nothing shows up in the area, nothing at all. nearest I see is a couple at gateshead and one at Angel of the North.
I searched for a tutorial on how to eat lychees, now I can make sick drone shots of south shields. However my drone did not withstand the winds. Isn't Temu reliable?
I noticed you were doing this on an actual computer but cant find a MAC / PC version for this planning stage? Any dieas where to find a MAC version as the IPAD version doesnt have the mission button?
Great work and explained very well. I think it's the best one I could find on YT on how to use and explore others flights. I presume this would work on the P3 Advanced?
+Jason Bigjay Leake that's good news as that's the same Phantom as mine. I'm going to explore others waypoint maps in my area (SW Ireland) and go flying. I bought the app recently but never used it until I was 100%. You explained that extremely well...thanks 👍
Nice job. Maybe next time you can explain on the world map what the Blue numbers, red Numbers etc mean. Thanks. What a beautiful location. I'm in Orlando FL USA
Very nice video, well explained how Litchi app works for DJI Drones. Quick question, when you fly Waypoints mission with Litchi app, does the telemetry data / flight data show on the live video feed from the drone? If yes then is there a way to get rid of it? Thanks in advance. Keep up the good work!
Hi Jason thanks for your superb tutorial. Bit of help if you don't mind. I have a phantom 3 and I have recently purchased the Litchi app. My intention is to do a course flyover of Backworth Golf Course for our website. I want the drone to fly fast up the fairway and cruise around the greens. In mission hub I've set the speed at the top end of the scale for the fairways dropping down to cruising for the greens. However I can't get the drone to fly at that top end speed. I know it can fly faster because when I tap return to home it comes back at the speed I want it to fly during the mission. Any help much appreciated and a pint . Milty
Milty Lap sorry mate for the late reply . You can set in the online hub the speed you want to cruise at , but don't set the cruise speed on the waypoint markers, also while flying the mission you can press forward and gain speed , when you let go the speed goes back to set cruise speed , if you need a demo I will gladly show you ..
Thanks for your reply Jason. I think I have sorted that one. I eventually found out how to set the mission speed in the mission hub and it seems to working fine now. Milty
Jason, need your help Sir, took my P3P out last evening using the Litchi app, some darn reason my video quality sucks. Set at 4k-30fps and it looks like 720 or even below on quality. I'll upload a video later of last night, have a look at it. I'm doing something wrong, wonder if you could make me a complete setup video, I NEED HELP!!!
ok mate no problem what colour grading do you use eg: dlog or standard ect and is the quality on your device or from pc send me a link when you have uploaded mate
Update: After many attempts to save the settings on the Tab S,I placed on the charger and came back later... (I had opened mission planner on the computer and logged in and out several times on my cell phone... not sure if this I had anything to do with things), but when I re-opened Litchi, the settings were saving. Very odd and no rhyme or reason but it's working now. Next issue. Marshmallow was the forced update for my Samsung Galaxy S5. When I tried to open either Litchi or GO in the field with Phantom hooked up, neither would fire. I tried a series of default settings, cache clears etc. and no luck. When I got home, I 0lugged in the Tab S and both applications worked fine. It's still on Lollipop. I deleted Litchi off the phone and GO works fine. There's an issue with Marshmallow not knowing which app to default to even if selected so it opens neither. For now, my only option is to delete Litchi (or GO but it's the original platform so keeping this one out of the two) and wait for a fix for Marshmallow. Only 9ther option is to get a holder extend or to fit the Tab S in the field or buy a cheap dedicated tablet running kitkat or lollipop.
Hi Jason, I am a novice, just installed Litchi to fly my Inspire 1. To plan a mission at home before going to fly it, do I have to have my iPad connected to my desktop with Litchi appl running? Sorry for my bad English, I am Brazilian, and live in Vitória. Thank you in advance.
Sagrilo Fotografia hi , you do not need to have Ipad connected to PC , sign into litchi hub on PC using your Facebook user details and then save your mission , then on your iPad sign into litchi , top left icon using your same Facebook details . Then your saved missions are automatically synced to iPad
hi , você não precisa ter o Ipad ligado ao PC , entrar no cubo de lichia PC usando o seu Facebook detalhes do usuário e então salvar a sua missão , em seguida no seu iPad assinar em lichia , ícone superior esquerdo usando o mesmo Facebook detalhes . Então a sua salva as missões são automaticamente sincronizados para iPad
Fantastic tutorial - excellent work. Question: it seems there's no "return to start point" setting? So you just have to add a waypoint close to the start (as you did)?
hi my friend ,since i did this tutorial there have been some changes in the app and mission hub, you can now in mision hub click on settings and you have a finish action settings which you can choose rth, land,back to 1 and reverse and you can also set this in the app
Great tutorial...but I don't think you need a Face Book account to save your missions to, I have saved mine to my own email account the same as I have logged into my smart device with the Litchi App. If you are one of the minority like me who hates Face Book then this is the alternative..Picked a lot of info on this tutorial many thanks and safe flying!!
Hands down to litchi app, it's far the best autonomous app for phantom. Litchi will send the mission to the phantom & in the event that you lose connection to the drone, the pre-uploaded mission or coordinates will guide through & complete the mission, that is just amazing. Can't wait to use this app with the newly released DJI Mavic Pro. Does any one know Litchi's update for Mavic Pro?
Thank you. Great video. But there is one important question. What you need to do to loss of signal, the camera continued to the slopes and lifts to the points of interest? My drone after signal loss keeps the camera on the last signal, and more camera does not move. Thank you
Сергей Аверьянов yes sorry to say that when drone loses signal there will not be any camera movement as the signal from the remote and device is needed to use poi the only thing uploaded to drone on starting mission are the waypoints and heights
Thank you. Great video. But there is one important question. What you need to do to loss of signal, the camera continued to the slopes and lifts to the points of interest? My drone after signal loss keeps the camera on the last signal, and more camera does not move. Thank you
Hello Jason. Many drone pilots are still flying a high-tech drone "somewhere/somehow/anything" In our community on www.drone-trail.com is a great challenge.
Your first click and up comes a POI??? I get a Waypoint. On to the next tutorial. For those who do not know... he should have said 'RIGHT CLICK'... to insert a POI.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Just what the doctor ordered .... INTERPOLATE. I had set up a mission to confirm my suspicions tomorrow. But now you've done the legwork. Appreciated. Thanks
I know this video is about 2 years old now but I just got a Phantom 3 and this video help me alot... Thank you
I never have done a mission on Litchi. I didn't understand how we do it and looked complicated to me. Now with this video I have learned how to do it. It seams very easy to do it. Even I use Metric and here is Imperial. Thank you for this tutorial.
Excellent tutorial . Answered several of my questions (absolute nubie) and filmed where I spent most of my childhood weekends and summers. Thank you!
Superb, just what the doctor ordered, the whole process is a lot clearer, Thanks from NZ, it's been about 12 years since I was in good old UK and even longer since I've been in Whitley Bay. I'll be sure to take a look though the rest of your stuff.
Great video, thanks so much for making it. I've just got myself a VR-One Headset yesterday and have been looking at a few videos on the Litchi app. This is by far the best, thanks. :)
Great video! I'm not sure if you have a teaching background, but you made this so simple to understand. Appreciate it!
Thorough, concise, informative and generally well done. Thank you for posting this video.
Cracking tutorial and video to boot, a great source of info for us newbies, I live not far north from where you shot that scene, we live on a beautiful picturesque stretch of Northumberland coastline and you showcased it well. keep up the good work.
Thanks for explaining INTERPOLATE and POI heights. Very helpful
best litchi vid I've ever seen. thanks man.
Excellent video! I thought I was already fit in programming missions, but have learned some more tricks now. Thx a lot for that! Thumbs up!
Decided to look up a Litchi tutorial before my first use, and what do you know, it's over Tynemouth. My home town!
Thank You! for taking the time do share info in such a clear manner, greatly appreciated. Looking forward to trying out, I suspect less editing/cutting will be required in post.
if you lose radio signal does the mission continue and record to the sd card?
Cheers for a great tutorial Jason. So much better than Litchi's own way too brief, music sodden offering. Now I'll go see if I can replicate some of the details you've shown me... if it ever stops blowing a gale!
Great video! Thank you!
And what a picturesque place to fly!
Nice video, I learnt loads thanks!
Hi, Great review of what could be a complex bit of software made easy. You have a new subscriber. I'm new to Litchi so I'll have to download the Mission hub for my Mac and get started. Thanks once again..
Just a plain old "thank you", easy to understand and informative.......new subscriber...LOL
I just watched the video. Great job. However, I thought there were controls to have it pause at specified points of interest if you wanted. I don't see that control in the mission hub.
great great video .. how do I get my Litchi app or log into the app on my PC?
Very helpful. I'm fairly experienced with DJI GO but just started using Litchi so I can do more 1-person operation, automate flights and focus on framing, and possibly automate everything to get footage I need in one flight which is helpful when time to charge batteries and remoteness from power are considerations.
To that end, few questions for you:
1.) how will focus POI frame the point of interest? Will it be middle of x/y as it looks in sample video of Waypoints course you set or at one of the the thirds or something else via gimbal pitch and heading direction?
2.) is a Waypoints mission able to be completed autonomously by the UAV, including programmed camera movements, if RC signal is lost?
3.) is there a way to adjust expo settings on app as we have for DJI GO such that we can achieve smoother pans and tilts?
I'll likely do some test flights to sort these questions out next week, but I thought I'd ask here in case others have same questions. Thanks much.
I was hoping you'd mention exactly how you actually initiate the flight and what happens between the saving of the mission and starting it.
+Justin Waldman sorry my friend I will post a start up tomorrow if the weather is ok
I watched your video and did my first mission to circle my house. I live on an acre and there are no changes in ground altitude. I used my house as the POI and Litchi set it for 3 feet. I'm not sure why it does that but my house is at least 15 at its highest. I set the gimbal for focus POI. For some reason, the gimbal would not point down to capture my house. Can you please explain the POI height relation to the height of the mission altitude I had to set my house poi 272 to get a gimbal setting of -72 with the mavic flying at 98". Just a bit confused here. I can send you the file if you want
just subd. NIce video. Just got litchi a few days ago with ps3a watching a lot of youtubers be flyin
Great Video and very easy and helpful. I have tried it for the last few days and was able to plan several mission on my desktop with no problem thanks to your instructions and youtube video.
The last couple of days I am not able to plan any mission on any desktop because when I start to create a mission the waypoint window does not pop up and when I try to left click any waypoint setting the little icon is floating all over the map..
The only way to make it stop is by clicking on the eraser icon.
I have no problem creating a mission on my I pad, it works the way it should. Any help would be appreciated.
Theo
Great video for waypoints. Thanks!
This was absolutely terrific, thank you!
Hello Jason, I notice that your Drone tuck off very quickly after you activated the mission. Now when I activate my missions it takes a couple of minutes before my drone takes off even short missions. I was wondering on the mobile device you use do you have the wifi on or do you have it in flight mode or completely turnd off.
Hello Jason. This is somewhat off topic but I was hoping you may have some ideas on how to resolve this issue. I downloaded Litchi to my Samsung S5 the other day. The various parameter settings all save such as negative elevation to -656, map radius to 32,805 etc. etc. This will be fine and work ok for the field; however, I also want to use my Samsung Galaxy Tab S which I also downloaded the application two after downloading to my S5 (along with it's purchase through Google Play). Frustratingly, I cannot save any of these settings so I can't use the 10.5 inch screens to assist in mission planning with say... for example, setting my altitude at a particular way point below 16 feet or expanding the map radius beyond 1640 feet as an outer radius limiter? It could possibly be a setting on the Tablet; however, I cannot for the life of me figure out why I cannot get the settings to save.
not sure with the android system but know many people that are.. if you create a mission through the mission hub on line does it save the settings
Great vid mate....Ive flown a few missions but never really understood the Interpolate... Thanks
interpolate smooths the gimble movement
I can put my own GPS coordinates of each waypoint?
Hi, nice video. i em little confused about all these altitude corrections. So if you set POI drone doesn´t know where it is and what altitude is there? Example - I set up 1st waypoint 1 at 10ft, second WP will have same 10ft, but this waypoint is at location 10ft higher then place at WP1. So dron will hit athe ground or will calculate hight from GPS coordinates? If not and drone do not calculate current altitude I have to calculate every change in terrain altitude . thanks;-)
I try to understand the blue with number you have the camera looking down . those are the wave point.
+Anthony Johnson the blue icon's are the poi points you want the camera to point at ,and the numbers are poi order and the height of the poi
Is there a way to select all waypoints on the web mission hub like you can on the app?
no sorry not at the moment hopefully they will add this feature
Hey Jason, I'm on a macbook pro, using Firefox and I can't seem to get the Waypoint settings dropdown menu to come up (you know where I dictate altitude, speed, etc.) Any thoughts on what I'm doing wrong?
Thanks for this. After viewing it, I went ahead and bought the app, not used it yet but will try some simple missions over the next few days before going on to bigger things. One quick question though, do you have any idea how I can get to view this mission? I've looked on the mission hub, even searched with your name and the route name but nothing shows up in the area, nothing at all. nearest I see is a couple at gateshead and one at Angel of the North.
so.Can I use litchi to drone with DJI naza M v2?
I searched for a tutorial on how to eat lychees, now I can make sick drone shots of south shields. However my drone did not withstand the winds. Isn't Temu reliable?
Excellent tutorial, thanks so very much!
Its a great tutorial, helped me a lot! Thanks!
I noticed you were doing this on an actual computer but cant find a MAC / PC version for this planning stage? Any dieas where to find a MAC version as the IPAD version doesnt have the mission button?
this is through the mission hub which is online mate flylitchi.com/hub
Great work and explained very well. I think it's the best one I could find on YT on how to use and explore others flights. I presume this would work on the P3 Advanced?
Thanks mate this flight was with my p3 advance
+Jason Bigjay Leake that's good news as that's the same Phantom as mine. I'm going to explore others waypoint maps in my area (SW Ireland) and go flying. I bought the app recently but never used it until I was 100%. You explained that extremely well...thanks 👍
+jon alford so, apart from the waypoints, what other 'extras' would you recommend?
jon alford follow me mode is really good but testing out the 360 panoramic is brill
How do you calculate the Altitude on you POI's . I still cannot figure that out overhere in a landscape what goes up and down, not flat at all...
I always fly manually first to get the heights and recky the area
Can I send you an email pls with some questions ?
Theo Meijer no problem
How did you make it a waypoint or a POI? Everytime I click on the screen I get waypoints only.
I didnt understand why to set the high to POI? what means that number you use to set it?
it is so the drone can move the camera to the right angle to capture the poi
Nice job. Maybe next time you can explain on the world map what the Blue numbers, red Numbers etc mean. Thanks. What a beautiful location. I'm in Orlando FL USA
Very nice video, well explained how Litchi app works for DJI Drones.
Quick question, when you fly Waypoints mission with Litchi app, does the telemetry data / flight data show on the live video feed from the drone? If yes then is there a way to get rid of it?
Thanks in advance. Keep up the good work!
Hi Jason thanks for your superb tutorial. Bit of help if you don't mind. I have a phantom 3 and I have recently purchased the Litchi app. My intention is to do a course flyover of Backworth Golf Course for our website. I want the drone to fly fast up the fairway and cruise around the greens. In mission hub I've set the speed at the top end of the scale for the fairways dropping down to cruising for the greens. However I can't get the drone to fly at that top end speed. I know it can fly faster because when I tap return to home it comes back at the speed I want it to fly during the mission. Any help much appreciated and a pint . Milty
Milty Lap sorry mate for the late reply . You can set in the online hub the speed you want to cruise at , but don't set the cruise speed on the waypoint markers, also while flying the mission you can press forward and gain speed , when you let go the speed goes back to set cruise speed , if you need a demo I will gladly show you ..
Thanks for your reply Jason. I think I have sorted that one. I eventually found out how to set the mission speed in the mission hub and it seems to working fine now. Milty
Very much interested in the Litchi app for my P3P & thanks for sharing, i think if i get stuck, would it be ok to ask for help?
no problem always here to help
Installed last evening, haven't had the chance to test, i will very soon. May have questions in the future!
Jason, need your help Sir, took my P3P out last evening using the Litchi app, some darn reason my video quality sucks. Set at 4k-30fps and it looks like 720 or even below on quality. I'll upload a video later of last night, have a look at it. I'm doing something wrong, wonder if you could make me a complete setup video, I NEED HELP!!!
ok mate no problem what colour grading do you use eg: dlog or standard ect and is the quality on your device or from pc
send me a link when you have uploaded mate
great air shows in that area .. every year..
I tried to use rth and auto take off and they didn't work do I have to be in a certain mode
not sure mate i use ios and i havent had any problems with this device are you using android or ios
Fantastic ! Can I store missions and all settings on an iPad without uploading to a social media app ?
Yes you can create online , wait till it uploads on iPad then delete online . Will always stay on iPad
What other option do I have ....if I am not on Facebook...??
Thanks dude, informative, learned some. Playing with Litchi on the P4. Some footage on my channel. I'm local too.
HI Jason! Good video! How change (move) mission to different location (GPS) ? with Android. Thank you
Android/ Mavic pro
Update: After many attempts to save the settings on the Tab S,I placed on the charger and came back later... (I had opened mission planner on the computer and logged in and out several times on my
cell phone... not sure if this I had anything to do with things), but when I re-opened Litchi, the settings were saving. Very odd and no rhyme or reason but it's working now.
Next issue. Marshmallow was the forced update for my Samsung Galaxy S5. When I tried to open either Litchi or GO in the field with Phantom hooked up, neither would fire. I tried a series of default settings, cache clears etc. and no luck. When I got home, I 0lugged in the Tab S and both applications worked fine. It's still on Lollipop. I deleted Litchi off the phone and GO works fine. There's an issue with Marshmallow not knowing which app to default to even if selected so it opens neither. For now, my only option is to delete Litchi (or GO but it's the original platform so keeping this one out of the two) and wait for a fix for Marshmallow. Only 9ther option is to get a holder extend or to fit the Tab S in the field or buy a cheap dedicated tablet running kitkat or lollipop.
Hi Jason, I am a novice, just installed Litchi to fly my Inspire 1. To plan a mission at home before going to fly it, do I have to have my iPad connected to my desktop with Litchi appl running? Sorry for my bad English, I am Brazilian, and live in Vitória. Thank you in advance.
Sagrilo Fotografia hi , you do not need to have Ipad connected to PC , sign into litchi hub on PC using your Facebook user details and then save your mission , then on your iPad sign into litchi , top left icon using your same Facebook details . Then your saved missions are automatically synced to iPad
hi , você não precisa ter o Ipad ligado ao PC , entrar no cubo de lichia PC usando o seu Facebook detalhes do usuário e então salvar a sua missão , em seguida no seu iPad assinar em lichia , ícone superior esquerdo usando o mesmo Facebook detalhes . Então a sua salva as missões são automaticamente sincronizados para iPad
Great!!! Thank you, have a nice weekend.
Excellent, thanks! How about the starting point and "Home"? Did you do manually or automatically? Very beginner here, cheers!
Fantastic tutorial - excellent work.
Question: it seems there's no "return to start point" setting? So you just have to add a waypoint close to the start (as you did)?
hi my friend ,since i did this tutorial there have been some changes in the app and mission hub, you can now in mision hub click on settings and you have a finish action settings which you can choose rth, land,back to 1 and reverse and you can also set this in the app
@@JasonBigjayLeake got it - thanks!!
so this is being done on the PC then ported to the mobile app? If so then is there a PC application or website app for waypoint programming?
oh wait, you've covered that at the end! excellent!
Hi, how do you get the mission onto your ipad app? Cheers
You must first create a mission on iPad and save then a folder will have been created so now all hub missions will upload
Hi is this mission still available to try on litchi i really would like to try it
yes my friend
@@JasonBigjayLeake thanks cant find it
do you make this mission on your computer then load it to your device?
yes always on computer
Would appreciate more explaination.
explanation about what?
What DJI Drone are you using because I do not get the same options as you.
Phantom 3 advance
And using iOS
This was created on litchi hub on PC
Cool Thanks for the quick answer.
Will work also in the same way with the P3 standard version ?
Great tutorial...but I don't think you need a Face Book account to save your missions to, I have saved mine to my own email account the same as I have logged into my smart device with the Litchi App. If you are one of the minority like me who hates Face Book then this is the alternative..Picked a lot of info on this tutorial many thanks and safe flying!!
I enjoyed that, Thank you.
thank you for watching if you need any more info on litchi just send me a message
@@JasonBigjayLeake Thank you, Just waiting for Mavic Mini 1 to be enabled and then we are off!!!
Hands down to litchi app, it's far the best autonomous app for phantom. Litchi will send the mission to the phantom & in the event that you lose connection to the drone, the pre-uploaded mission or coordinates will guide through & complete the mission, that is just amazing. Can't wait to use this app with the newly released DJI Mavic Pro. Does any one know Litchi's update for Mavic Pro?
Thanks so much for sharing
Nice tuto, thank you :)
Is it Phantom 4?
P3A MATE
Jason Bigjay Leake Phontom 3 advanced
Thank you. Great video. But there is one important question. What you need to do to loss of signal, the camera continued to the slopes and lifts to the points of interest? My drone after signal loss keeps the camera on the last signal, and more camera does not move. Thank you
Сергей Аверьянов yes sorry to say that when drone loses signal there will not be any camera movement as the signal from the remote and device is needed to use poi the only thing uploaded to drone on starting mission are the waypoints and heights
Really Cool ! Thanks
Thank you. Great video. But there is one important question. What you need to do to loss of signal, the camera continued to the slopes and lifts to the points of interest? My drone after signal loss keeps the camera on the last signal, and more camera does not move. Thank you
thanks, it was really useful
Nice. Good video.
Joseph Kemetmuller
Phantom 3advanced
Hello Jason.
Many drone pilots are still flying a high-tech drone "somewhere/somehow/anything"
In our community on www.drone-trail.com is a great challenge.
Your first click and up comes a POI??? I get a Waypoint. On to the next tutorial. For those who do not know... he should have said 'RIGHT CLICK'... to insert a POI.
in 2016 controls was set different for poi and waypoint markers..
Android