To start comparing quotes and simplify insurance-buying check out Policygenius: policygenius.com/foureyes Thanks to Policygenius for sponsoring this video!
You guys should do a whole video on table legs like this. 3 legs, 4 legs, 5 legs. I especially like the angles you got off that tapered bit there at the end.
As an amateur with woodworker, i typically feel overpowered with the entire arrangement ruclips.net/user/postUgkxrYREG3-7f1Aqk9ams3ZESRNzGnfdUtyQ . Be that as it may, this arrangements drove me through with much clarity and effortlessness woodplans. Works i now work like a genius. That is great!
I am so glad I found your channel. I have learned more from your videos than with years of trial and error. Thanks for teaching an old dog a lot of new tricks.
6:08 To avoid most of the burnings by cutting bevel vertically I usually undercut on first pass like 1/32" or sometimes 1/16" and then move the fence for final clean cut. It comes out with less burn and cut marks which makes sanding much easier.
I find it fascinating that you guys mentioned hand planes for profile #1, but not for #2. A deep and steep undercut bevel is basically the perfect example of something that is relatively fast and easy with a simple hand plane (even if you're not great at hand planes yet), but complicated, slow, and/or dangerous with power tools. I would go so far as to say that it's probably worth getting your first hand plane just to try this profile out on the next table top you make.
All of the three are easily done with a hand plane. That’s what I was thinking from the beginning on. But always remember: if you are making it more then once the machinery can be the faster and easier way.
All I could think of for the steep bevel was just grab a hand plane mark the damn thing out and get to it. In the tapered chamfer screams to be done by hand.
Love the details. Hand plane is the easiest, fastest and safer option for the second and third details. Of course if you are experienced and comfortable using it.
This was great. One of the best "Tips" videos I've seen. I'm still "amature" with my router, and it scares the bejezus out of me. I'll have to do some tests with this. It looks cool. Cheers! Scott from Japan.
Great tips!!! I dislike my lack of artistic and creative ability as I always make rectangles. Sometimes they even come out really nice but essentially everything is a pile of rectangles. Occasionally, I have a need for a circle but it's never a creative aspect. These tips really help add some nice touches!
Love the router jig have been racking my brains for the past few day on how to do the bevel. I am building a 4'/10' table for a client, was going to use the track saw with a jig for the bevel. But the want radiused corners and couldn't figure out how to do the bevel on the other than hand planing and sanding. Still might do that but will def goth this jig some thought! Thanks. Love the channel
Greetings. I think all your ideas for treating edges are awesome. I discovered a "higher level" by using contrasting paint for the edging, with a stained tabletop. For example, I can paint with primer then topcoat quarter round molding. After drying it can be attached to a table edge. This rounded surface allows comfortable leaning on the table. Peoples elbows won't rub on an edge when sitting. No router is necessary, but 45 degree meters on the corners or sanding to reduce points on the corners is recommended. A matching 1/4" matching stripe inset 1 inch from the molding all the way around, adds a little flair on the top. Seal with favorite finish. My script lady tells me to stop typing...RG
Yes, 4eyes videos are always fantastic. I'm happy you guys have been able to start making them more often. And I guess Congratulations are in order! :)
Nice video. For us that took the hobby to the next level (ahem), there is not much content left to watch anymore, as far tips and advice goes.we seen the drawbores, the tenoning jigs, the sliding dovetails and the saw sleds. We want MOAR. this video was a step in a good direction.
Haha, nice intro and editing guys! I love the little details in furniture, I feel like that's what really propels a piece to the next level. Thanks for sharing, this video is a great learning tool!
Cheers! One always learns something. From now on I'm using a sled to cut the long tapers into legs, WAY safer than the angled piece of wood I had taped to the leg!
The artistic creativity and precision you bring to your work is extremely impressive to me. Your projects have made me look at furniture builds and your style in a whole new light. I consider your projects as "advanced" level but I really want to try one of your builds. Can you suggest one of your build plans for someone starting out? I'm ready to try and fail (goof up my lumber) to grow skills. Love your shop, style and humor. Awesome video. Thanks for sharing
That good, however funny, I had to look at the background to confirm my suspension about you guys joking around. And thanks for showing what might be a safer way to make the profile for some of us less accomplished woodworkers .
A new subscriber is always welcome to a channel. Yet, I decided to subscribe, not a woodworker myself, but in appreciation of all the nice work you two do!! Congrats and keep up adding to this excellent channel!!
I throughly enjoy your videos not only for the content but also and perhaps just as much so for the production and humor. Curious when you are going to upgrade your ‘94 super eight video camera?
I like the thoughtfulness that you guys put into your projects. Design, discussion of manufacturing techniques and my favorite part, if you don’t feel comfortable and confident with a particular portion of the process i,e. milling the sharp undercut of the table on the table saw. My thoughts on that are tall fences and sleds are musts and take some practice “runs” to see where there might be some unsteadiness. You guys are good designers.
I’ve got a cutting bird I’m going to use that last one on. Thanks for helping me figure out how to finish it out right. I’m goin to put opposing chamfers on the short sides. Yes k really excited about that boring cutting bits now.
Really like the video. I've been watching since quite possibly the first four eyes video, as that was around the time I first started trying to really improve my woodwork. Currently this video is perfectly at my level as this is exactly what I'm trying to do, and I do appreciate the emphasis on certain cuts being unsafe with certain set ups which to be honest I don't think is mentioned enough in wood working youtube. For me, personally more videos like this. Also, not to be lame, I'm at the level where I'm up for the challenge of doing one of your more advanced builds, but the pricing of your plans means it's too much of a commitment. I appreciate how much work you guys have put into these, but my workshop isn't quite like yours, if I have £130 to go into my wood work I'm buying a nice sheet of valchromat or a rail square. At half the price I'd take a chance, but if I were to do it properly, in wood, it's a few hundred more or so for the lumber to do your (again, very pretty) project. My honest, loving thoughts. Like the video very much and personally enjoy this direction.
I used to cut those steep undercut bevels on bigger tables (with a sliding panel saw no less). It was definitely hairy and we had a tall fence and just screwed the top to it, always using two people.
To start comparing quotes and simplify insurance-buying check out Policygenius: policygenius.com/foureyes Thanks to Policygenius for sponsoring this video!
You guys should do a whole video on table legs like this. 3 legs, 4 legs, 5 legs. I especially like the angles you got off that tapered bit there at the end.
Chris please start a beginner series_ how to work with angles, tips and techniques, and many more that can help.
As an amateur with woodworker, i typically feel overpowered with the entire arrangement ruclips.net/user/postUgkxrYREG3-7f1Aqk9ams3ZESRNzGnfdUtyQ . Be that as it may, this arrangements drove me through with much clarity and effortlessness woodplans. Works i now work like a genius. That is great!
I am so glad I found your channel. I have learned more from your videos than with years of trial and error. Thanks for teaching an old dog a lot of new tricks.
Thanks Michael...and we're glad you found us too :)
3:14 This is the reason why I listen to this channel
It's the Saddle-T Square from Woodpecker. Currently Out of Stock. I love mine! Hopefully they will be back in stock soon.
Best channel on RUclips. Thanks for all the hard work guys.
6:08 To avoid most of the burnings by cutting bevel vertically I usually undercut on first pass like 1/32" or sometimes 1/16" and then move the fence for final clean cut. It comes out with less burn and cut marks which makes sanding much easier.
Congratulations, Shaun!
Thanks Jonathan!
Thanks for letting us look under the hood to understand why your work is so good!
I find it fascinating that you guys mentioned hand planes for profile #1, but not for #2. A deep and steep undercut bevel is basically the perfect example of something that is relatively fast and easy with a simple hand plane (even if you're not great at hand planes yet), but complicated, slow, and/or dangerous with power tools.
I would go so far as to say that it's probably worth getting your first hand plane just to try this profile out on the next table top you make.
Hey, thanks for the highlight!
I would add that the tapered chamfer is even more appropriate for a hand plane.
All of the three are easily done with a hand plane. That’s what I was thinking from the beginning on. But always remember: if you are making it more then once the machinery can be the faster and easier way.
All I could think of for the steep bevel was just grab a hand plane mark the damn thing out and get to it. In the tapered chamfer screams to be done by hand.
As always, the humour is spotless
You rock guys!, Thanks for being humble and share some of the secrets of your woodshop.
Love the details. Hand plane is the easiest, fastest and safer option for the second and third details. Of course if you are experienced and comfortable using it.
More videos like this please! Also, you should do a whole video on router tricks. Call it The Routerama!
I'm learning so much from your channel. Thanks and appreciation.
Glad to hear it! Thanks for watching!
Great video…that you didn’t script. I’m a new subscriber.
You guys just earn yourself a new subscriber. All the way from Trinidad
Man, you two are killing me! I’d watch the two of you do videos about literally anything! Thanks for the dedication to your many different crafts!
Funny guys and beautiful pieces, great job!
Who doesn't like "pulling it off"? And you're right, it is always a nice feeling.
Exactly!
This was great. One of the best "Tips" videos I've seen. I'm still "amature" with my router, and it scares the bejezus out of me. I'll have to do some tests with this. It looks cool. Cheers! Scott from Japan.
Video production and quality is on top. I actually learned something and had fun, amazing!
Great tips!!! I dislike my lack of artistic and creative ability as I always make rectangles. Sometimes they even come out really nice but essentially everything is a pile of rectangles. Occasionally, I have a need for a circle but it's never a creative aspect. These tips really help add some nice touches!
Great info and great humor, guys. Thanks.
Bill
Our pleasure!
This is what I am looking for.
I LOVE YOU CONTENT BRO.👍
Love you too brother :)
I absolutely love your videos! For me, it's educational entertainment at its best. Please, keep them coming.
Love the router jig have been racking my brains for the past few day on how to do the bevel. I am building a 4'/10' table for a client, was going to use the track saw with a jig for the bevel. But the want radiused corners and couldn't figure out how to do the bevel on the other than hand planing and sanding. Still might do that but will def goth this jig some thought!
Thanks.
Love the channel
Always good laughs and quality vids. Much appreciated.
Glad you enjoyed it
Been making cutting board for too long, wife thinks I am crazy but going to make a coffee table! Appreciate all the tips and general info
That tapered chamfer makes things look super slick.
wow. A prodigy. Savage! Rounded edges
Simply Workable
Nicely Rustic
As a hobbiest woodworker looking to get a little more serious, I really appriciate these great tips; thanks for sharing!
Greetings. I think all your ideas for treating edges are awesome. I discovered a "higher level" by using contrasting paint for the edging, with a stained tabletop.
For example, I can paint with primer then topcoat quarter round molding. After drying it can be attached to a table edge. This rounded surface allows comfortable leaning on the table. Peoples elbows won't rub on an edge when sitting. No router is necessary, but 45 degree meters on the corners or sanding to reduce points on the corners is recommended. A matching 1/4" matching stripe inset 1 inch from the molding all the way around, adds a little flair on the top. Seal with favorite finish.
My script lady tells me to stop typing...RG
Love the sled for the tapered bevel - so simple and so effective; that's one's going straight into use!
That throwback had me rolling!!! Classic classic classic - well done guys!
Oh shoot!!!! Congratulations Shaun🎉🎉
Great video guys 👌🏾
Thank you!
Haha - this video had plenty of laughs and solid info. Overall, A+ material lol
Thanks Donny...glad you enjoyed :)
Yes, 4eyes videos are always fantastic. I'm happy you guys have been able to start making them more often. And I guess Congratulations are in order! :)
What a nice video. Full of fun and great tips. Thanks guys!
Thanks!
Fabulous video guys. Really, just fabulous. 👊🏻👊🏻
Thank you!
Excellent tips great work!
Another great video and some clever tips also. Thanks guys, I really enjoy your videos.
Thanks for watching, Simon!
My dudes - rip/ crosscut 7tpi hand saw and jack plane edge bevels. Quick, cheap, dastardly, and very satisfying.
Chris you are the best!!!
you guys are really cool and your video's are amazing!
LOVE UR HUMOUR XD sweet videos really love the content ♥️
Fantastic! Finally a good video on focus on the final result and the many ways to get there. Thanks
almost peed my pants with that retro 1994 segment 😂
Too cool for school... very nice
Nice video. For us that took the hobby to the next level (ahem), there is not much content left to watch anymore, as far tips and advice goes.we seen the drawbores, the tenoning jigs, the sliding dovetails and the saw sleds. We want MOAR. this video was a step in a good direction.
Haha, nice intro and editing guys! I love the little details in furniture, I feel like that's what really propels a piece to the next level. Thanks for sharing, this video is a great learning tool!
Really appreciate it!
Good info and good humor!
Thank you!
Thanks for sharing these tips greatly appreciated!
Thanks for watching!
Educative, interesting and Hilarious.
Thanks for the alternative methods.
Thanks for watching!
Nice video! The edge work really can make your project look so much better.
Thanks Caleb...it really does !
Nice tips guys! Thanks!
Thanks for watching!
Great info, exactly some fine details I was looking for👍👍 I love a jig for making complicated stuff easy
Glad to hear it!
Great film, always enjoyable and entertaining. You guys are Oscar level actors. Useful information too. It's all in the details. Mahalo for sharing.
Always happy to hear it! Sometimes we surprise ourselves with our acting, but usually we are surprised at how bad it is. Thanks for watching!
I've had great success cutting the Steep Bevel with a track saw.
Cheers! One always learns something. From now on I'm using a sled to cut the long tapers into legs, WAY safer than the angled piece of wood I had taped to the leg!
Great Job, Very good smart action 😷
love the content... amazed you were testing a sawstop in 1994 already ;)
We were VERY early adopters. Plus we hate hotdogs
@@Foureyes.Furniture Ever tried Japanese joinery? I'd love to see you both give it a go.
I feel like your autocue assistant doesn't get enough credit. She deserves a spin-off channel.
Solved a couple of issues for me ...thumbs up thkx! (a little envy on your Mirka sander ^ .^)
The ruler at 9:54 is really nice. Is it from Woodpeckers? :-)
Yes; the Saddle-T
This is a very nice video.. It's fun and educational.. pse keep on producing good videos.
Thank you!
The artistic creativity and precision you bring to your work is extremely impressive to me. Your projects have made me look at furniture builds and your style in a whole new light. I consider your projects as "advanced" level but I really want to try one of your builds. Can you suggest one of your build plans for someone starting out? I'm ready to try and fail (goof up my lumber) to grow skills.
Love your shop, style and humor. Awesome video. Thanks for sharing
That good, however funny, I had to look at the background to confirm my suspension about you guys joking around. And thanks for showing what might be a safer way to make the profile for some of us less accomplished woodworkers .
Thanks David....just to confirm all future suspicions. We're almost always goofing around :)
That 90s video was spot on the wavy lines that awkward look when being filmed......... Oh and that hair!!
This is a beautiful way to see the details. I love the work you guys do. Thank you for sharing this with us. 👌
Thanks for watching!
Thanks y'all. Great entertainment
A new subscriber is always welcome to a channel. Yet, I decided to subscribe, not a woodworker myself, but in appreciation of all the nice work you two do!! Congrats and keep up adding to this excellent channel!!
Like your well produced vids and the drawings and animations! keep up the good work
I throughly enjoy your videos not only for the content but also and perhaps just as much so for the production and humor. Curious when you are going to upgrade your ‘94 super eight video camera?
That was awesome guys
Thank you, guys
Any time!
Thanks guys! Soo encuraging as usual!
Good tips. Love the super mario ruler.
Wow, true entertainer... have you guys ever thought of making a podcast?
Thumbs up, like it a lot.😄
Haha, we talk about doing other things like podcasts often. Maybe someday!
I like the thoughtfulness that you guys put into your projects. Design, discussion of manufacturing techniques and my favorite part, if you don’t feel comfortable and confident with a particular portion of the process i,e. milling the sharp undercut of the table on the table saw. My thoughts on that are tall fences and sleds are musts and take some practice “runs” to see where there might be some unsteadiness. You guys are good designers.
I loved Those details
hey what about a circular or track saw? I m a beginner and definitely want to bevel. Thanks for all your vids!!
Great new ideas for next projects😁
wow amazing creative think ...
Use a jack plane for deep bevels, and make it look hand crafted.
I’ve got a cutting bird I’m going to use that last one on. Thanks for helping me figure out how to finish it out right. I’m goin to put opposing chamfers on the short sides. Yes k really excited about that boring cutting bits now.
Really like the video. I've been watching since quite possibly the first four eyes video, as that was around the time I first started trying to really improve my woodwork. Currently this video is perfectly at my level as this is exactly what I'm trying to do, and I do appreciate the emphasis on certain cuts being unsafe with certain set ups which to be honest I don't think is mentioned enough in wood working youtube. For me, personally more videos like this.
Also, not to be lame, I'm at the level where I'm up for the challenge of doing one of your more advanced builds, but the pricing of your plans means it's too much of a commitment. I appreciate how much work you guys have put into these, but my workshop isn't quite like yours, if I have £130 to go into my wood work I'm buying a nice sheet of valchromat or a rail square. At half the price I'd take a chance, but if I were to do it properly, in wood, it's a few hundred more or so for the lumber to do your (again, very pretty) project. My honest, loving thoughts. Like the video very much and personally enjoy this direction.
Best intros on RUclips
Thank you!
Awesome. Super helpful
Thanks Benjamin :)
Dope video! Definitely gave me some new ideas, thanks for the very helpful tips. Subbing for sure 👍👍
The script thing was gold. 😂🤣😂🤣 they are great details. Thanks for the tutorial. 👍
Glad you liked it!
LOVEEEE the more techical, how did we achieve this detail, insight! At this point in my woodworking this is the super helpful stuff helping me improve
Really glad to hear that! Thanks for watching!
Just an idea, depending on the angle, you could do a tapered chamfer with a tracksaw.
Excelente técnicas de trabajo
Awesome video! This style of experimenting with finishing details could be made into several videos.
I'm only 4 minutes in, and I just subscribed
Thanks for sharing the bevel juice!
Don't say it three times :)
I used to cut those steep undercut bevels on bigger tables (with a sliding panel saw no less). It was definitely hairy and we had a tall fence and just screwed the top to it, always using two people.
Great video! As a flannel enthusiast I would love to know what brand of flannel you guys wear.