chevy cruze / sonic oil pan 1.8
HTML-код
- Опубликовано: 15 окт 2024
- If a MECH A NIC video helped you consider donating to my patreon account to help support the channel. / the_mech_a_nic
or my paypal
paypal.me/jona...
THE MECH A NIC’s amazon store ,here’s the tools I use
www.amazon.com...
THE MECH A NIC’s Instagram page
/ the_mech_a_nic
THE MECH A NIC’s facebook page
/ the-mech-a-nic-1356996...
Thank you for watching my video, I appreciate the support ! - Авто/Мото
Excellent camera work very good lighting. Appreciate the zooming in and out of the areas. Very educational. Thank you very much for the video.
You're welcome. Thank you for the comment
It wasn't long ago that we didn't pay much attention to torque specs. But now, with cast aluminum blocks and much thinner steel all around, fasteners everywhere approach the limits of failure. Sometimes old habits die hard, ha ha.
Definitely. I'm sure it's just a matter of time before a quick oil change place strips the threads on this new pan lol
Good job ! I've only done two oil pan replacements in my life. They were both older vehicles that had gaskets so no worries about smearing silicone. I hope you had a little talk with the owner about being 2 quarts low on oil.
I made sure to bring up the oil problem with the owner 👍
@@themechanic6117 I was pretty sure you would ! It's amazing to me how many car owners don't even know enough to check their oil regularly .
The thing that was in way was the oil pump feeder. You should also do the timing crank case gasket and timing belt pulleys if you drop the pan. Also pull the battery terminal to reset all sensors and hopefully clear engine check light.
Admit it, you wanted to steal that steering wheel cover. I always watch a YT video or two before doing something I've never done before or something that's specific to that model. I'm 51 but I'm always open to learning new things that'll make my life easier
It's definitely a good idea to watch a video before doing the job. So you know what you're getting into. Ha! I'm not going to lie those fuzzy steering wheels do feel soft 😁
I could tell.... the way you were raw dogging it. Weren't even wearing gloves
Now I have to get checked for the rona 😁
A great video on how to replace an oil pan. Nice one 👍
Thank you. If only all jobs went this smooth lol
Way to go!!! Mr. Good wrench.. I also love the new "Chapter separators" lol
Glad you enjoyed. Trying something new with the "sections " of the video 👍
I think the job pan out pretty well
Thank you so much for sharing this with me it going to really help me
You're welcome. Good luck
Nice and precise Johnathan. I'm thinking that was a 6 hour job .
Thank you Steve, I didn't keep track but I definitely had a good amount of hours put into it. 6 sounds about right
Fantastic video
Thank you
Thanks for the video. Gonna pay somebody to do it
In the words of Clint Eastwood (Josey Whales) ah man got to know his limitations
😁👍 knowing is half the battle lol
Best and easiest video thanks 👍
Thank you
Great job as usual but why on earth would someone not replace the oil and filter omg 🙄 regards from Dublin City Ireland 🇮🇪
I guess it wasn't in the budget . I would have rather changed the oil also. 👍
@@themechanic6117 absolutely I know you would its madness 🙄 your videos are always so informative and precise you have helped me replace parts on both cars here keep up the fantastic work it's much appreciated 👏👏👏
Thank you sir👍
Thanks for watching
1st Mistake, buy a Chevy Cruz
2nd Taking it for an oil change at one of those 10min oil scam places.
Definitely lol
Maybe whoever that bought that car it's all they could afford and it's not a difficult fix
Great instructional video 💯👍
Thank you
Another good Video just one question what was the name of the silicone did you use?
Permatex oil resistant black RTV
Good job, thanks
Torque spec is crucial on suspension and engine tranny ! Most mechanics sont bother because they wanna move on to the next job..
That's true , always trying to beat that book time
What is the long object that obstructed the pan from coming off?
All of THAT... just to take off the PAN.... WOW!!!
What do you think about a used 2011 Chevrolet Cruze 1.8lt with 43K miles for 7.4K USD? Is it worth taking the deal for a daily driver car despite their issues?
If you buy it expect to start fixing the same problems over and over.
I wouldn’t waste my money!! I have a 2011 1.8 and it’s been a nightmare, first the 200$ valve cover was leaking and filling spark plug and cylinder with oil, then transmission lost 2nd gear got by for awhile by putting it in manual and skipping 2nd now it won’t go in reverse and after warms up , then just slips and won’t pull.. just always something wrong with em and that’s alittle high on price, heck new they were what 14k, just a cheap non reliable vehicle
It will start having constant problem as soon as 60k but I managed to get to 150k with my 2014(1.8, bought at 110k) before it became a real shitbox. Now I'm fixing it every other week because I was irresponsible and didn't have any money saved to buy even a used vehicle 🥴
do you happen to know the Oil Pan Bolts length? It's E10 but im not sure the lengh. Thank you!
Sorry I don't. Best thing you can do is remove one of the easy ones to measure it.
Need you as my mechanic 😭
Why is it every car you work on as a engine light💡 on, is it compulsory 😆😆😆
As long as the car keeps driving they don't care what light is on lol
Obstructions
Great video we had to do the same on my sonic and everything you said we had done also to the T. So great video. I had one question though. After reusing the dip stick that was with old pan we noticed oil seeping from where it connect into new pan. Was there any rubber grommet in new pan or you had to get out of the opening of new pan? There is a small one around the casing near the bottom but that’s all I saw. I bought a new casing for dip stick and some grommets on top of that but wasn’t sure one was suppose be already in pan before working the casing down in to lock itself? Hopefully that wasn’t two confusing to understand.
I believe there is a rubber O ring, that going on that tube to stop oil from leaking out.
@@themechanic6117 Thanks i was just making sure that the oil pan itself wasnt suppose to have something like rubber gromet built in where the tube fitted. i went ahead and bough a new oil dip stick tube. maybe the old tubes rubber o ring was just to wore out to try to use again since its at 201,000 miles. the tube was rusted so it was about time for a new one.
Good video harbor freight sells a
1/4 drive Etorx set item
Item number 68017
Great job. Turd car. Just my opinion, no offense.
Definitely lol