Garden room OSB3 roofing and rubber roof, 1st fix lights and a bit of insulation
HTML-код
- Опубликовано: 28 сен 2024
- A break in the weather has allowed us to get on the roof and get it water tight!
We used OSB3 roofing sheets and fixed them down with 63mm ringcut nails.
We then applied the rubber roof and fixed it with the water base adhesive.
Any questions ill try to answer
Thanks
Great video series and so refreshing to see a professional job using professional tools. I’ve done all my own work now for years after getting fed up of employing so many crap tradespeople always cutting corners and then having to finish their shoddy work.
These are the most informative videos for any DIY with a bit of knowledge. Well done to you and your team and I wish you all the success in the world. You deserve it.
YES PLEASE! Please show the 1st and 2nd fix electrics for this current build.
Top video as always. Amazing channel.
Another great video on putting the roof together. Looking forward to a video of you putting a Kingspan insulated roof on.
Some cracking views of Jen on this one ;)
Spot video, we use that glue and it's the best I've ever used cheers keep up the good work.
soooo... tell me and I'm sure you've been asked this before... how many times have you fallen off these rooves? Another great video and I've spent most of the day watching these (yes even the long ones).
Get Jen on camera more with her outrageous lovely hair. Really impressed by her skillz. Much love from Belfast and keep up the amazing work.
Top videos as usual! I bet the neighbours love Liam shouting, I mean talking , all day long lol
Nice one as always Liam. Wondering if you’ve ever done a soundproofed room, say for a music studio for example?
+1 on that
It hurts my knees just seeing Jenny kneel on that wood without any knee pads 😂 Though I am considerably heavier than her
I'm sure you would kiss them better for her
@@asef698 Hard pass thanks 😅
sorry adam mate :D , cheers for doing the electrics mate, and know your place liam moaning about glue on the gun, that was hilarious
Use a drain pipe for the roll,works well for rolling out 2
I am believer ‘Hybrid roof all the way’ it works and it’s easier.
hi thought a hybrid roof had insulation on top of joists as well as between. not quite sure what this type falls under or it is even a thing😂
Hybrid is a combination, it works, believe, or don’t 🤷♂️
indeed, did u put insulation on top of the joists... I must have missed that bit sorry.
Hi Liam, great videos, I watch them every week to get hints an tips for when I tackle my own build later this year. Just wondered if you will be doing that video re King Span roof panels instead of timber/rubber?
You say ‘What I’m gonna do’ a lot 😆
Have you tried the Bahco PC-22-INS 22-inch Insulation Saw? It's more of a knife with a wavey edge than a wood saw, so there is little insulation dust.
Love the bit Liam am not blaming you jen pmsl 😂😂it was like a wife telling you off. At least you all have a Good laugh
👀🤣
Like an old married couple!
What make are your work pants Liam? Good work dude👌
What insulation sheets are you using?
Great video. May I ask why have you not used untreated wood ? Would it not have been better to use say tanalised timber ? I am complete novice so just asking ?
Good job he's got a lapel mic or he'd have to shout. 😉
😂😂😂😂😂the boss got told,you go girl 😂😂😂😂
Go Jen!!! That’s you told lad 😂
Liam. Those PIR boards are nice and snuggly fitted - have you experienced cutting the boards slightly small, gaps between the board and the rafters? What do you do? Replace the board or use those expanding foams?
Expanding foam mate, we always fill all the gaps after insulation
Liam, loving the video, helping me build my own 4.8x2.4 room.
What do I do with the space under the roof osb at the wall where the joist lay?
Rock wool/PIR it or put some timber in?
Fill it with pir if possible, if difficult, cram it with Rockwool mate
Do you use 100mm insulation for ceiling and 50mm for the wall , thanks
Top video again 👍
Yes we do mate
@22:08 Jen saying "It doesn't protrude through the rubber. Nice! Also, no expansion joints in that OSB, and glued?
It’s not butting up to anything, where exactly is it going to expand too? 🙄🙄🙄
@@thegardenroomguru Through the rubber at the sides if you're unlucky!
@@thegardenroomguru AND, it's got to be glued - so the argument, such as it is, is academic....isn't it?!
if 9x2 4.2 joist are used what would be the maximum spacing i would need for my project.
sorry to ask but i dont know anyone to ask, thank you
Do you need any cross ventilation for the roof joists guys??? Cross battans?
How big a gap do you need to leave on roof space for the 'ambient air' space?
Is there gonna be the Oakwood calenders this year Liam
not being funny or trying to wind you up. but i got an EPDM Rubber roof recently and it didn't have the writing on 1 side
Who supply’s the rubber for the roofs ?
Why don't you use contact adhesive on the side of the roof
Liam get Jenny some knee pads👍🍺
Have u stopped leaving the rubber for a day to rest ? Is there no need to do u recon ?..I'm just about to get the edpm on ,next few days
depends on how warm it is mate and how long the rubber has been folded up for TBH
@@thegardenroomguru sound ..
@@markveganism5003 I’d definitely give it a day to settle or at least a good few hours if you need it down before more rain
Just a quick question. Is it viable to have a garden office built over the winter?. Or am I best waiting until next spring?. Cheers!.👍
We build all year round mate, can be a pain in the bad weather, but gotta keep the wheels rolling
Get him told Jen 🤣🤣
Should the board not join on the joist?
He explained that - did you watch(listen!)..?!
.......You're trying to wind him up aren't you......!!
Have you ever fallen of a roof ??
Ya back ya back getta pole getta pole
You wanna treat Adam to the dewalt cable stapler for twin and earth.
rapid, pretty much the same as you using the pasload over a hammer 😃
It also complies with the premature collapse regulation being a metal fixing 👌🏼
I’ll show him 🙈
@@thegardenroomguru just the little 2Ah battery lasts all day too, so for a room like you lads do it’ll be no problem at all
@@Cablesmith he wants one now 🤦🏻♂️
@@thegardenroomguru haha it’s a belting bit of kit mate. Doesn’t grab too hard but if it’s used where cables are hidden it’s perfect.
You can tell if a sparky is qualified as they are wearing their NICEIC issued stockings under their trousers.
🤣
You can tell if a sparky”s standing straight...because he dribbles from both corners of his mouth...
is that rubber unusually thin?
That question is meaningless - and impossible to answer......!!
@@andymccabe6712 maybe you don’t understand the question. ??
Hi Liam, if you have a very large garden room can you join the rubber roof membrane or do you get a custom size made?
Always one piece mate
@@thegardenroomguru flashing tape no good?
DM me if you need a supplier for western red cedar, you can buy direct from the mill if you need some. Just finished my build using this and A1. Cheers
Hi mate could you send me the link please
@@kamikaze7347 DM me on Twitter @cableguyvm
@@boblees3310 will do thanks mate
4:23 Jen needs be go careful, leaning over and holding on with only one hand...I was sweating watching this😬
Not all hammers are created equal!!!!!
Fucking still got that shit hammer
A hammers a hammer mate, it’s the guy or girl swinging it that makes it more than a hammer. Have you thought about addressing your language issues?
@@thegardenroomguru tell him that swearing is the first resort of uneducated dummies! (probably won't understand.......!)
“What I’m gonna do”
THERE'S GLUE ON THE GUN!!!
Get the lass some knee pads
Jen hold the Camera Still
First ;)
Unlike our football teams....
No 10th lad !!!!
What on earth is this? Send me your postcode you absolute creep.
@@SeanDerwin1979 Yer finished 10th in the league and me postcode is L4
@@SeanDerwin1979 what are you on about mate , absolute toss pot you .
you like rolling on the glue on your knees, you say. keeps you young you say. man you are bouncing around like a 4 years old anyways .. ha!
Rubber is print side up. Poor customer!
I take it you never watched or understood what I said then 🙄
@@thegardenroomguru I did, but I've never had rubber printed on both sides?!
Get him told Jen, don't let him give you too much grief, lol
A no nonsense sparky ,, never knew they existed , quality , keep it up
Great video Liam, but Jenny’s poor knees
Doesn't Liam have knees?
Hi Liam
I just wanted to say a big thank you for sharing your knowledge and experience here on YT. Watching your channel gave me the confidence to tackle my 3.5 x 5.5 epdm roof this weekend. It went really well and I'm so pleased with the results. Thanks again!
Brilliant! Decent sized roof for your first go too 💪🏻
This dude and his team are the absolute kiddy’s of garden rooms top top geezers and gals .. fab videos .. spot on channel keep up the great work
Great stuff Liam - keep doing what you're doing!
Great vid as ever! When are you showing how to install insulated roof panels? Get your SIPs out for the lads and ladsies
Building a 5 x 3.5m based on your spec, joinery company doing this , gave them your link and said that’s what I want 👍
Hi Liam. Love your videos How can I get one of your hoddies 🇨🇮
Hey guys another great video. Jenny how are you enjoying the job now you have been there a while. You are a pleasant addition to the team and they would be lost without you. I've noticed they smile a lot more with a lady around them.😊
Yes Jen, how are you enjoying it? 🤔all I get is back chat 🙈🤗
@Jennie Bulmer yes your a great asset in this team.Love your hair
Liam what is the thickness of the rubber you put on the roof?
1.2 mate
Great channel Liam. You guys remind me of the time I was working with my uncle brick laying and renovating. Keep up the great work. Thought about building tiny houses?
Is this the thing my daughter told me about on RUclips ?
Liam what is the model number of the Makita circular saw. 2ant to replace my crappy Ryobi one with one of these.
Great vid. I have searched everywhere for the name of them boots. Anyone know,thanks
blue steel mate
@@thegardenroomguru cheers mate. Thanks for your time. Ps still love the channel. Spot on
Hi Liam, I've got a 3.5m span, if I use 5x2 @ 400mm spacing do I need to double up the joists. Or can I use 4x2 doubled up. Ta
Do you have to use tongue and grove for the roof? Also will doubled up 4x2 be suitable for a roof on 3.6m roof?
Thanks for your videos.
I find these videos very informative and interesting - but have you any idea what you've done to the availability of C16 timber for the average DIY'er like me?😤
Yet another great video. I'm now wondering if you have done any pitched roof builds and if so do you have a pitched roof video? Thanks, again.
Great vid as ever. Just a thought, have you considered investing in one of those gimble things to help minimise the camera movement. Makes a huge difference to the finished footage, and they don't cost mega bucks. Keep up the good work.
Great video, very informative as always! Where is the rubber roof from? I'm doing a small shed and like the look of a rubber roof!
Liam, have a revelation for you, it was for me. The bahco insulation saw.... amazing, cuts clean, cuts true and no dust!!! You heard it here first 👍thanks for the vids, you Ali and Steve have given me the faith to do my own, have walls up roof up and rubber to go on when this rain stops.
What is the model number of the circular saw?
Liam, keep up the great work! Love your attitude and humour in the videos!! You and your team are producing great work and it’s refreshing that you don’t give in to the haters and keep going with your beliefs in this world of bloody experts. Cheers 🍻
When fixing your back boxes do you do cut through the vapour barrier.
Liam, top work. Off topic a bit but do you apply a bead of sealant around he window reveals?
Nice to see you again.
Rafal
What’s the model number of the circular saw please Liam?
Hi Liam love the videos,what are the pencils you use ?
Noticed the striker pencil. Got a set yesterday. The bollocks.
Can anyone explain how the hell they install the noggins in a straight line? Are they screwing them in at an angle like a pocket screw?
Probably a little hard to explain with out a video mate. but ill try, we fix the first one through the side of the next rafter and spike it into the previous one, then the same with the next, face fix it into the next rafter and put the nail gun tight into the corner of the previous noggin and send it at an angle, and so on...... if that makes any sense 😬
Which glue do you use?
If I'm doing 2 layers of OSB on my roof for sound insulation, should they both be t&g or can I do one standard and one t & g?
consider using sound proofing plasterboard but don't think they are to be used on a roof. they are super heavy!
Where do you get the rubber sheets from ?
Hi Mr. Griffin. Lovely progression with this little peach of a room. Loving the longer videos. They are very explanatory and will help hundreds of people like me build a garden room without the stresses of ‘what do I do now?’ Love the Paul McKenna bit. Superb. Keep up the fantastic work. 👍🏼🍺
Thanks Andy
never join tongue and groove in the air, always on the beam
🙄
There’s always one 😉
@@catstevens5890 no actually there are alot of us :D
@@mammutit that's so old school,there is no need to always land on a joist with glued tongue and Grove we do it on floors with heavy traffic, this is a roof with next to zero traffic that is way over engineered in the first place
The whole idea of the t&g is to fly over space to minimise waste !
Absolutely addicted to these videos - top quality... Just bought a build pack and can't wait to get started! Can anyone please answer: Could you build bigger than the 30m2 allowed under permitted development without Building Regs, if you do it as multiple smaller rooms? (E.g. 2 x 20m2? Thanks!
if you keep it separate yes, and as long as it's lees that 50% of your garden area
@@tureq85 Great thank you 👍