First off, thank you George. I tried to undo the glove box first but didn't know about the screw under the panel. So THANK YOU! Also for anyone having a hard time with this(I did because my LEDs are a little fatter at the connector side) once you unplug the cable(which he shows at 3:25), you can take the whole switch/light shroud out so it's MUCH easier. There are just two catches, one on each side of the light shroud and it will slide out the front. Then you can flip it upside down to see what you're doing, then reverse all the steps. 👍🏻
Hey George, is that radio stock? Do you know the mobile number, I'm trying to upgrade from the original 3.5" no GPS stock version I have but can't find info. Help! thanks man!
First off, thank you George. I tried to undo the glove box first but didn't know about the screw under the panel. So THANK YOU!
Also for anyone having a hard time with this(I did because my LEDs are a little fatter at the connector side) once you unplug the cable(which he shows at 3:25), you can take the whole switch/light shroud out so it's MUCH easier. There are just two catches, one on each side of the light shroud and it will slide out the front. Then you can flip it upside down to see what you're doing, then reverse all the steps. 👍🏻
Sounds a lot easier! Thank you for watching my video and I'm glad it helped you out! 😃
You're my renie god, thanks George
Thanks friend
Would it have been possible to just pull the bulb out without removing the glovebox?
It might be possible if you have a small hand
Hey George, is that radio stock? Do you know the mobile number, I'm trying to upgrade from the original 3.5" no GPS stock version I have but can't find info. Help! thanks man!
parts.chryslerjeepdodgecityofmckinney.com/p/Jeep__Renegade/RADIO-MULTI-Media/66776902/5VV70LXHAA.html?partner=googlebase_adwords&feedLabel=cvb_make_model&kwd=&matchtype=&device=m&network=g&userLocation=9018530&googleCampaignID=1917836836&googleAdGroupID=70983524139&googleAdID=350128416449&googleExtensionID=&gclid=CjwKCAjwpuajBhBpEiwA_ZtfhQqyv71EA9s0beS2vP1xV4zl9rdc3eFw71N8q-kkUmWHxAn1vHKvQxoCOOkQAvD_BwE
You do not need it
Just pull the front trigger sides
Valeu gringo