Silent Air Compressor (DIY)
HTML-код
- Опубликовано: 26 апр 2017
- Support me on Patreon: www.patreon.com/sekaustria?fa...
Project no.38 Make your own Silent Air Compressor
fridge compressor is the main part of this project which i got from a water dispenser. the propane tank was totally brand new i got it for $10.
iv'e been wanting this project for so long ago that's why i already have some parts which i collected in my school when im in college.
Products that have been used in the video:
Pressure Switch Valve Set: sea.banggood.com/custlink/KKm...
Hole Saw Set: sea.banggood.com/custlink/Km3...
BUYING TO THIS PRODUCTS WILL GIVE THIS CHANNEL A LITTLE SUPPORT.
Valve: goo.gl/1rEHK9
Scroll Saw Blades: goo.gl/DZKwmm
Electric Solenoid Air Valve: goo.gl/GUHcqk
Sanding Belt: goo.gl/GPQs1A
Strong Single Switch Welding Magnet: goo.gl/cCDLYM
Router Bits: goo.gl/ni5xvh
Wood Flat Spade Drill Bits: goo.gl/FqG4Ey
Nibbler Cutter: goo.gl/AF2UuM
Electric Grinder Rotary: goo.gl/UqkaDn
LED Delay Module: goo.gl/z3CwmV
cooler Plate Module: goo.gl/Mfwb8y
Pressure Regulating Valve set: goo.gl/SC5ch6
Digital Angle Rule: goo.gl/nNxPyS
Turbo Worm Geared DC Motor: goo.gl/Gfqc93
More Mechanical Parts: goo.gl/cj6CyS
LIKE MY FACEBOOK PAGE / pinoydiybuilds
SUBSCRIBE TO MY CHANNEL / sekaustria
AND SUPPORT ME ON PATREON / sekaustria
Like Share Subscribe for a Weekly Videos #Diy-Projects #Homemade-Projects #DoITyourSELF-Videos #DIY-Channel 
Наука
First
165.
Mysterious Manish. , ,,
Mysterious Manish t
Last
Mysterious Manish congratulations
Nice work matey, now hunting for a scrap fridge!, i need a quieter compressor for winter, so i can air-brush indoors..im not freezing my arse off in my workshop!!Lol!. All the best.
Bro... Fantastic job! Looks great and works really well!
Love that rooster in the background who started so many times but barely had a chance to finish :)
Done puedo comprar
Necesito uno.
Very Good build. Exactly what I was looking for. Thank You!!!
Very nice video.......and big respect from Zagreb/Croatia
Very well presented and executed good job.
I just love all the safety gear
Amazing Compressor creation 👍👍👍
Once the galvanic corrosion depletes the threads on that check valve, you will have a 100+ psi bullet with a HUGE potential to kill someone. Imagine sitting down on the ground to drain the water when it flies off into your eye. Given there is no rifling, no containment, that screws shape, and the pressure exerted on it, the potential for it to tumble is high. So it enters your eye, and hits your brain. Caskets are more expensive than proper air compressor parts. Engineering your own parts is one thing, but not when it comes to pressurized loads. Most people do not realize that little things such as using dissimilar metals can cause catastrophic accidents. Do not solder -- braze it. Do not weld the tank unless you are a professional welder. Fill the tank with water, drain, then dry; Don't weld a tank full of water. Match the maximum working pressure (derate it by at least 20%) of the tubing (look it up from the manufacturer given the diameter) to the check valve you intend to use.
This is the best one I’ve seen
Well done, very nice and great finished look. For next build, you do not need a oil drain plug in the bottom of the compressor. All the oil in the compressor ends up in the bottom of the air tank, so you need plug there. To add new oil to the compressor, just dip the inlet tube on the compressor in a cup of oil and it will suck it up happily :)
I Like You Frined Nice Aap Ka Mere Chainnel Me Swagat Hai Dost ....
Again you surprise us your machines, they are very easy to make. Greetings from Colombia
thank you very much sir :D
Daniel Boom 98
Great craftsmanship.
That’s absolutely adorable❤
Ha ha ha ... Very creative. I want to develop it into a PCP pump. Thank you for the information.👍🙏
Grat video man left a like keep up
It’s amazing how much pressure one of those motors will produce. My dad made one with the motor out of an old freezer. He had a big tank and set the high limit to 300 psi. He set the pressure back down when he blew a low tire off the rim. He was lucky not to get hurt. 😀 They are slow to build pressure though.
Welding in flipflops and wool gloves. Guys a genius!
Go away karen ! U dont belong here
Says the guy with a hundred burn scars.
еще фильтр добавить на входящею трубку, что бы пыль не набиралась в компрессор, а в целом получилось хорошо)
Also a Filipino DIYer here! Amazing works!!!
who cares if you are Filipino.. damn man. Theres like 100s of millions of you flips. And im sure there are plenty who Do Shit Themselves too. Just say say Amazing Work and be done with it. Fucking 5 feet troll.
Te quedó excelente, mis felicitaciones.
At last you done good use of yours underware for wipe compressor oil good skilled man 😁😎👏🛠⚒🔨🔧
hahahaha that his secret
what size thread is required for the T check valve socket?
is the 1/4 reducer NPT or BSP?
and where do you get the extension ro mount between 1/4 reducer and pressure switch?
i3dm
Very good your compressor my friend, I'm crazy to ride mine too.
Esta muy lindo y funcional el proyecto, debes ponerle a trabajar el espiche del aire que queda en el tramo del tubo de salida del compresor, asi ayudas a evitar que toda la presion de aire del tanque una vez que el compresor alla alcanzado la presion de llenado que hayas fijado en el presostato la reciba el flaper de alta, tienes la opcion solo que le pusiste un tapo, ella va con una manguera de la valvula antiretorno de tres vias a la parte de abajo del presostato. Yo hice uno pero con un compresor de aire de 15.000 btu, de botella, lo que no me gusta que igual estos tipos de compresores escapan mucho aceite salida, y a su vez llenaran el pulmon. Saludos..
Very cool well done.
Idol ka talaga sir!
Excelente los compresores de aire.con la bocha de heladera . impecable los trabajos abrasos
Prima Arbeit!
Clean work design
very good work
Maravilhoso trabalho amigo.
Nice video and actually gumawa din ako nyan (I get the idea on this video) di nga lang kasing ganda ng sayo. Thanks for making this video
muito bom ficou muito lindo tambem parabens
I gave this a thumbs because I think this guy was welding naked at one point lol n the sound effects made it
Thanks for your video….yours was one of the first that caught
my attention and got me interested in this.
Since then I’ve made a number of these compressors for others (from used,
broken, craigslist, and dump-finds with Porter Cable, DeWALT, Craftsman, Campbell Hausfeld, Huskey, Bostich, and Central Pneumatic tanks (2 gal to 20 gal)). ALL working great (and none having experienced temp overloads filling from empty- which surprised me on those greater than 8 gal).
TWO OIL DRAIN-FILL QUESTIONS (answers will help not only me,but all others making these units)
(1) With a refrigeration compressor with 1 pressure tube and
1 inlet tube (assume “without” any manufacturing installed crimped Freon fill
tube) I’m having trouble draining/filling oil (while tilting compressor towards
the inlet tube) due to "either", various bends in the inlet tube, OR due to no air escape route while draining. Any suggestions how to drain/fill with only 1 inlet tube
(2) If there are no answers to (1) above, I assume a last
resort might be to drill a hole in the compressor and Braze a fitting into the
hole (that can be capped or plugged for drain/fill). Can this be done with a
Bernzomatic TS8000 torch using Mapp gas?
Issues are not knowing what's on the other side of where you're
drilling; getting chips into the compressor
while drilling; heat having some bad affect inside the compressor while
BRAZING.
Thanks.
Sir, meron akong napanuod dati sa RUclips din, to refill the oil after draining, put the compressor oil in small water bottle at the suction side of the unit, and quickly run the compressor,. Until the oil is filled thru suction pipe. If not enough, just refilled until normal level.
@@pogingbagsikmagno4976 Thank you very much, suction worked !
that last wiper is awsome hahaha
I put a 1hp compressor onto a 50 litre tank.replacing a broken "rattler". Perfect.
parabens servico de mestre..
Really great idea ;) like!
nice job man
ang galing talaga ng Pinoy!
you got the active and neutral arse about on the switch, input side.
Nice welds bro!
love yaa deadly winter gloves for welding
Wow amazing.
Thank you for this video. i cant find the 1/4 reducer and the 1/4 copper tube connector from Aliexpress. Can you share the link were you bought yours? thank you
I love this!! Welding with grandma's gloves in flip flops. Either Mexico or China. Although both are the same just smell differently. However, TRULY silent air compressor. These in the US that utilize fridge pumps are still around $1000.
The word "explosive decompression" comes to mind when looking at those welds.
Nice, Sek this is cheap & easy to build in my place ( i will made like you video) thank's a lot sek, keep roll with new video other device.
yes i will :) thanks for watching always
Bahut bdhiya good luck video
Beautiful..!!!
Awesoooomeeeee!!!! 3thumbs up!
Lajkčina!!
Danke für uploading.
Great build😊
Very good job, When you introduce us to the sound effects (rooster) Sek :)
hahaha lol
Uy unang ambag sa pinas nagustohan kotong compressor nato maganda to para sa shop namen😄
I thought you needed a start capacitor when using sealed units. Can someone explain this to me please
Good job indeed 👍👏👏👏bravo
I like your welding bro
Mate you're awesome. I almost feel like a slacker, as I have some, probably most of, the tools that you have, and I don't do anywhere near what you do with them. I saw you build a scroll saw, make a nibbler, a compressor, and I'm sitting here looking on eBay for ones to come along. I'm 38 and only ran my first bead of stick weld last weekend.
this kind of stuff is fun. just be happy of what your doing mate and thanks :)
Sek Austria yeah, it's fun for sure. At the moment I'm restoring a vintage broadaxe so that's really fun for me. I love my time in my workshop because nothing is a problem. Even if I break something or do it wrong it doesn't matter, it just means more time in my workshop.
Next project for both of you...antigravity evice!
NIIVELL DEU !! LEVEL GOOD !! NIVEL DIOS !! UN CRACK !!!!!!
please answer me why you change the oil in compreesor
Will be great for my airbrush! Thank you.
"Angas nyan kuya ah" hahahahaha awesome project, from dasma, cavite
salamat haha
Thanks, a wonderful idea
Ojitos hicheros
Superb :)
Is there a way to do this without welding? I have zero experience in that. I do need a quieter compressor however
Galing tlaga ng gwang pinoy..
another well deserved repurpose. keep it coming.
yeah thanks
Как всегда ЛЮКС !
Great project! Why did you change the oil? Is it necessary to install a valve to change the oil?
extreme make. ayos yan para sa industrialization ng Pilipinas.
astig sir.... makatry nga
Nice video
Fiz com motor de ar condicionado 10 BTUs, reservatório de extintor, coloquei todos intenso de segurança ficou top. 120 psi.
Una observación como sugerencia es que tienes dos tubos para la entrada de aire en uno le puedes adaptar un filtro de motocicleta para gasolina (purificar el aire) y en el otro poner una boquilla con una tuerca cónica cuerda interna con tapón para agregar el aceite ademas en la salida de aire del manifould ponerle un filtro para retención de agua y aceite. pero en si es muy bueno tu proyecto felicitaciones.
There is oil vapor heavily coming out of the compressor actually, so you need to separate it and lead it back to the third (sealed) pipe end coming out of the compressor, because that is where it has originally been filled with gas and oil. The oils they use in these compressors are mostly synthetic ones (e.g. polyolesther) and they cause irritation with skin and lung contact, so you should keep that in mind. Cheaper (like noname chinese) compressors have very thin, waterlike oil in them, expensive ones (like Danfoss) have thick and yellowish oil. I have just disassemled a few of these, and used one to make 4bar in a vessel, but I think it may also be suitable for painting compressor, however, you need to carefully lead back all the oil to the compressor.
Good day! Do you know of any way to unstick a stuck up ref compressor without opening it? I repurposed it to inflate car tires it worked great until it won't run anymore. Thank you!
@@raymundsantos2324 It may be the case that the compressor halted in a situation when it was already so hot - because of the possible lack of lubrication at that point - that some metal parts just "melted" together. (Perhaps heated up so much that the metal material reached its recrystallization temperature that resulted in undesired changes in the shape of the actual metal part.. which caused it to stuck.) But you can try injecting compressor oil into the inlet and outlet, and try sparkling it to start.. :) However those are just ideas, I havent tried starting a stuck compressor yet
@@asd49789 thank you very much, will try to do that. Have a nice day!
VERY GOOD
Conception is really good and the work too but if u want to use it for something else then for airbrush that has to low power and if u'r using this for airbrush u don't really need such big tank u can instead use old fire extinguisher or CO2 tank from this wierd home sodifiers but the work what have u done is really good
Saludos cada cuanto tiempo hay que cambiar el aceite para sacar e agua del compresor y no sufra daños?
Es cierto que cuando usas un motor frigorifico para hacer un compresor de aire, es mejor ponerle aceite 10w40, en vez del aceite que lleva?
Got those drill saw bits a couple of years ago through your affiliate link on a prior video and very happy with them, thank you.
Tempted to try this project, though after having my last compressor stolen I'm more inclined to wait until I relocate to a home with a work shed I can lock
Thanks bro and goodluck
hello i have a question how to used an ac compressor with the help of an electric motor to transfer lpg gas to a lovato gas tank?
Very nice
exelente video saludos desde sinaloa mexico
Magnific machine 👍👍🇧🇷🇧🇷
Pinoy talaga hahaha nice bro
very nice
at the end of the video, clean the oil of the screw with some underpants?
Good morning sir l Give good knowledge for thanks
ang angas ng gawa mo boss..
Me encantan los zapatos de protección jajajaja. Felicitaciones excelente
Can I use an AC compressor? You drained the oil and replace, what kind of oil?
super idea bass
Your rooster sounds very funny at 1.5 playspeed
good technology l like it
esse cilindro que você usa para armazenar O ar é de que.?.?.? quantas libras você coloca...
thanks bro
Ficou tão bom que tocou a música da HIGH TORQUR