Testing With a New FAST Racing Series Build. 1966 Chevelle 396! 1967 L88 Corvette Goes 9.21 147 MPH
HTML-код
- Опубликовано: 7 сен 2024
- We went out to test a new car that we built for a customer. Went 9s right off the trailer but we had issues and had to call it for the day due to some issues. Our day didn't end there! The 67 L88 went 9.21 147 the fastest pass ever! Also went a 1.39 60ft!
www.HPDepot.com
Instagram: horsepowerdepot
Facebook: Horsepower Depot
Tic ToK: horsepowerdepot
Love 66 chevelles..
Wonderful job on the Corvette. I love watching you guys. Makes me miss this racing.
-Jack Irons Jr.
It's amazing how you get these cars fast without big intakes/carburetors and running exhaust manifolds. 👍
Lots of homework, testing, and dedication to get here!
@@HorsepowerDepot oh I believe it. Great work. 👍
Oh cmon, u can tell us…where’d you hide that 150 shot?😅
under 10 seconds is fantastic for a street driven car = chevelle is a big car = 396 doing a great job ! super top quality = i bet your father is the MAGICIAN OF SPEED !
Its not a 396
@@carado1984 In another comment Jordan mentions it's a 560.
The chevelle is a real 396 car. Current engine is a touch bigger.
@@HorsepowerDepot ,
I have a real 138 Chevelle 1966 Super Sport , built small block 327 /600hp and does 11.5 in the quarter mile ,
Engine screams to the moon !
What size turbos you running@@jimthomas1989
Your '67 Corvette is simply OUTSTANDING! FRIEND HAD ONE BUT WITHOUT YOUR KNOWLEDGE OF MOTOR, SUSPENSION ,and tire expertise, he was only able to get his tri-power car to go in the mid to high 11's and that was with real slicks! Simply amazes me your talent! Tell you what I would LOVE to see is you set up with your STREET tires race a new Tesla Plaid! From what I have seen. They usually run 9.3 at about 150 in the quarter and it would probably come down to a driver's race. Seeing who cut the better light. Best time for a Plaid in 60' has been a 1.43 so your 1.39 is exceptional! Like to know how many others would enjoy a best 2 out of 3 race!
No need to extend the bowl vents run a 5/16 hose vent to vent with a hole cut in the top of your hose ,beautiful cars nice job on both 👍
Nice look Chevelle, Thank You for Sharing Jordan
9.10 is getting closer
It’s close. It should go 9 teens this year for sure!
Utterly mind-blowing performance! Talk about wolves in sheep's clothing. Both cars look like 13-14 second street cars. I love this channel! Thank you SO MUCH for putting out these terrific videos!
Beautiful Chevelle - my favorite year. Nice color combo with the black vinyl top.
It’s a very nice, all original body panel car!
I always look forward to your videos. It sucks that I live on the west coast and haven’t had the opportunity to see you guys in action.
I’ve also been a big fan of HemiJoel since he raced his green GTX. He is one reason why I bought a Hemi car.
Another great video - love them. One thing i noticed, following all your videos, is that the car that trapped the highest miles per hour was the red '69 L88 with the borrowed engine. I believe it went over 148, and only a few 100ths off the fastest ET of the '67. The setup in the '69 was unreal and ran extremely well, but it seemed almost as if the car was an afterthought. Keep up the great content!!
The engine in this 67 is the same exact engine that we installed into the red car that weekend, but makes more power now. The hood really hurts the 67. 69 l88 is a 4 inch cowl hood, the 67 is 1 1/2. Thats why this car wont mph to the 1/4 mile. The 67 is 2 mph faster to the 1/8 mile though. It works well for the first 660 ft.
Always stoked to see a new HPD video pop up on my phone. I was mashing the accelerator through the floor with you to try and get a 9.19, lol! Heard the bog and knew it probably wouldn’t happen. But hey, still an unbelievable pass. I’m proud for ya on how well the 67 has done so far. Will be a lot of fun seeing the continued progress. Love your channel!
Absolutely awsome! Takin my car out sat 1st time in 2 years👍
Good luck! Hope it goes well!
wow even putting chevelle’s in the 9’s! you guys have it figured out. i would love to run 9’s in my 67’ chevelle ss.
We’re trying to put it deep into the 9s!
Another awesome video. Can't wait to see how fast the Chevelle gets.
Thanks for sharing its flying
May I have a tissue? Comin' right up!
I love this class amazing how you can make these cars Bogie. God bless
I remember some of the Mopar guys complaining about your dad not running an air cleaner. Maybe it's different on the 69 vs 67 but it's pretty funny that it's actually slower without it. 11:58 lol you actually mention it.
Same exact air cleaner and filter setup on the 69! Its been brought up a couple times. Funny how its actually now documented that they are slower without them. The 69 ZL1 hated no air filter or even no air cleaner lid! Did a lot of dyno testing with that car.
That's awesome!!! Greg does have a platform... It was fast before he sent it up to you, but, with your magic wand..... can't wait to see
Looking good and glad to see you're happy with the' 'vette. That Chevelle is going to win some races !!
If you tighten the lock In the standing column by taking the wheel off turning the tightening screw in a quarter turn and then putting it back together the wheel will lock properly
I will look into that! Thank you!!
Another awesome Video ! It really nakes my day better when I see a new video is up..
I’m sure you probably already have jet extensions in the secondaries. I think since your car 60 foots pretty hard that taller vents may not be enough to prevent fuel from coming out of the vent. They sell a whistle to prevent fuel from coming out of the vent but it’s not 100% effective in racing. You can install a hose that connects the two vents together and put a couple holes in at the top so it can vent. They also sell a one piece vent that connects the two bowls together as well.
It’s got jet extensions in it. The current vents aren’t tall enough to put a hose on or I would have tried that. Lowering the float level helped a bit. I think others in the class would complain about the non factory “look” if I put the one piece vent in, but that’s the one I’d like to run.
I would love too see y'all do a 1970 454 L-S6 Chevelle build a race it !!!
Love all your videos, thanks for sharing. Got my eye on a 69' chevelle for a FAST series car, and hope to meet you guys one day.
These guys know their stuff❤❤❤❤❤
66 SS has Been my favorite for years
i can tell you how to fix that telescopeing column,awesome what you all have been doing!!!
Yalls cars are so impressive I just put my 60 over 427 in my 88 monte carlo SS yesterday the motor makes pretty good power for what it is its got a small howards hydraulic roller it's 235x241@50 with 628 lift on a 108 lsa it's right at 11 to 1 compression and has afr 265 roval port heads I don't know what it's going to run but once I get a 9 inch rearend in it I'll find out it's got a stock 10 bolt posi with 373 gears but I'll be going to 430s or 456 gears great video
Hey I absolutely love your channel!!!! You're old school drag racers...I have a question....I was always taught to never let the motor pull the car down when you pass the finish line ...but you let the motor pull the car down....your feelings on this????
You need to hit neutral to be able to shut the engine down, using factory shifters and reverse pattern valve bodies we can't go right to neutral to shut the car down. Its never really been an issue with our engines.
@@HorsepowerDepot ahhhh i didn't know that ...thank you for educating me!
That Vette is a bad machine. Amazing just having an air filter changes et.!!!
Fricken awesome!!!!
Try extending the fuel bowl vents outside the hood. You might be pulling so much air that fuel is being sucked out of the fuel bowls. that way you get true atmospheric pressure in the carb. which is 14.3 at sea level. or put fuel injection on it.
I the FAST rules, can you put a hose on the carb vent tubes to prevent gas from dumping? Thanks
Holy Moly! What was the DA on that pass? You got it goin' on!!
Wow Jordan!!!! That Vette is freakin' flying!!! How many cu in is that L88??? And how many cu in is the 396 in that Chevelle???
They’re both 560 cubic inch.
That's it. For some reason, I couldn't remember. Thanks Jordan, and keep makin' that '67 quicker & quicker. @@HorsepowerDepot
With some fine tuning, I'm thinking 8s for the 67! It sounds like 3rd gear in that Chevelle is pretty tall ... compared to the Corvette. 1st to 2nd sounds good but 2nd to 3rd is a bit of a gap. Still getting into the 9s first time out isn't too shabby.
Yeah we have some work to do to the chevelle before next time out.
@@HorsepowerDepotBrother bad a*s 💪🏿💪🏿.My friend couldn't believe it especially with cast iron manifolds.
I was happy to find your post today. I bet that chevelle is not a 396! Tell us more about it. Sorry the good weather is about over for you guys. Tell us what your Winter projects are.
It’s not my car so I won’t say too many details. But it’s 560 cubic inch.
pretty damn cool !
Damn!
Right, double damn!
Vent baffles will fix the fuel running up the vent if you don't already have them.
It’s got them and for some reason still does it.
Love it! Do you know what the wheel size is that are on the Chevelle?
Make sure you upgrade driveshaft on chevelle
hey is that an electric vacuum pump you switch on just as your staging, love the channel here in nz
Wow what is the displacement of the engine in the Chevelle?
LOVE IT
I'm probably wrong but kinda sounded like the Chevelle was blowing through the trans or converter at the top of second gear.
Yes it does sound that way, It's got a couple issues we need to address before next time out.
Put you a sneaky Pete nitrous kit and you can get it in the 8's!
No no no. We’re going 8s NA! If we used nitrous this thing better be going 7s!
Yes!
Excellent!! One criticism... Couldn't you have emptied the tissue dispenser to save a little weight?? Would the rules allow you to move the tissue dispenser to the trunk!?
The owner of the car says the tissue dispenser stays to hand out tissues to all the cry babies! And it slings back on launch for better weight distribution!
@@HorsepowerDepot 😂🤣😂🤣 thank you
All the ford whiners….hahaha
Awesome site what is the difference in weight between the chevelle and the vett
Around 200 pounds. Corvettes are not as light as everyone thinks.
An L-88 is an aluminum headed 427 cu. In. engine.
It is an aluminum headed. GM painted the heads in 67.
@@HorsepowerDepot I owned a new 64 GTO and spent many a weekend at the old US30 drag strip.Nicki and Baldwin Motion thrashed these engines to 10.7-10.8@130s in the day.Just figured this engine had something else going on.Beautiful car and clean setup,nonetheless.Car club friends had 66 split window and the other an L-72 427.Those were the days of endless street racing.
I would love to see one of these make a hellcat cry
It’s happened! Lol!
@@HorsepowerDepot YESSS,!THAT'S WHAT I'M TALKIN 'BOUT!
Y'all don't run a slosh tube between bowls?
Yes it doesn't seem to help.
Ain't isn't no way that Chevelle is a 396ci Imma guess over 500ci
It’s a real 396 car that had a 396 in it. 560 cubic inch now.
pointers....no drivers here.............
Why not double up on your secret air filter ...Maybe if you jet the carb right you can throw away the air filter ..
The class rules require that they run with an air filter.
Well, you see, the rules state the factory air cleaner has to be on during all runs. So rejetting the carb for no air filter would just slow it down.
Also, the air filter 'may' straighten out the air flow. There's a lot of thought that contributes to making these cars run the numbers they run..