I work in quality engineering. I will replicate this experiment and do some durability testing using this on different materials like wood, steel, aluminum etc. Then after I have the results I will repost in this comment thread the results from the data for metrics like: Torque and Angle limits Breakaway Torque Thread clamping /Yield strength Durability @ different temperatures etc. This should be interesting........
I think it will be a very interesting experiment. 👍 For reference, the experiment in the video above has not melted or caused any problems until 4 months have passed. Thanks for the nice comment. 🍀💚😄
Naturally, It is useful for light items such as clothes hangers and toilet paper hangers because its strength is weak compared to anchor nuts. Thank you 😄 당연히 앙카나 너트에 비해 힘이 약하기 때문에 휴지걸이, 옷걸이 등에 응용하면 좋습니다. 감사합니다. 😄
글루건 특성상 저온에서 모재와의 접착력이 약할뿐더러 습한 환경에서 목재가 팽창하게되면 글루건과 목재사이에 공간이 생길수 있습니다. 칼블럭과 유사해보이지만 대체용으로 사용하기에는 강성이나 내구성이 떨어지는건 사실입니다. 급할때 임시용으로 사용하기에는 너무 좋은 아이디어 같습니다~!
I wonder if you could do the same thing with a stronger glue. Maybe mixed epoxy or JB weld would be stronger. Would be interesting to test how much force it takes to rip out with the threads in the wood vs hot glue vs other things. Possibly some wood glues, superglue etc.
Yes I've done repairs but it's light duty there's other ways for heavier needs Honda had engs yrs ago would strip head bolt threads I'd take all thread and expansion sinks put in the block and make a stud it worked great and was cheap verses tapping oversized and drilling out head etc.....
@@knezie25yeah but thread that is tapped into wood isn't strong. Epoxy has such a good bond to wood that I would rather trust it more. But either is a moderately light duty type of connection.
Good post. I do much the same with epoxy resin. Heat a bolt and coat it with wax. Fill a hole with epoxy resin. Press in the (waxy) bolt. Back the bolt out a few hours later when the epoxy is cured. You can always heat the bolt slightly, if needed, with a soldering iron. Now you have super good threads that can be remolded if they accidentally get cross threaded. Mine is a boat builder's technique.
It's a decent idea for light duty but in reality you can thread into wood without glue or anything just think drywall is hung with screws lol now in light work on other materials it's not a bad idea
Exactly what I was thinking. I actually took a screw eye with threads like this (didn't have a screw lag) and put it in a ceiling joist, directly in the wood, and it was able to hold a surprising amount of weight on it (over 200lbs)
@@JonathanHolt1988 yes bro I've pulled car engines with the same as your talking about lol carpenters and etc ..use lag bolts to hold beams and logs and etc ...the glue in wood isn't a good representation of the idea but if it's some different material then maybe yes
Since the bolt or screw is generally harder than the material you're going into, just pre drill out correct hole size and make your own threads with bolt. Works with plastics and anything else non metallic.
Great concept. There's much harder melting glues out there that could make it very tough and durable. Bohning Ferr-L-Tite Hot Melt Adhesive Stick is what we use to mount arrow shafts to the arrow heads. And I just tried it, and it's like a really hard plastic once cooled.
I like the idea of hot snot but I've used toothpicks in many a stripped hole. Just jam a couple in, run your screw and it's solid enough for a door frame.
Единственное, чтобы я сделал - это делал бы отверстия обратным конусом в дереве, т.е. слегка вращал бы ось сверления так, чтобы входное отверстие было такого же диаметра, а в глубине расширялось, тогда бы точно клеевую вставку было бы не извлечь и оставалась бы только прочность клеевой резьбы.
Вот именно про эту ситуацию с разбитым гнездом я тоже хотел написать, но меня опередили! 😁 Так же подойдет для варианта с очень твердой древесиной, в которую саморез в принципе завернуть проблематично, да если еще и у самого конца бруска. Саморез обязательно его расколет по принципу клина. А вот вариант с клеем спасет ситуацию.
Yeah. Wood glue is probably best with wood, whichever glue bonds best with the material. Tapping bits are mostly for metalwork. You can just drill a woodscrew directly into wood, that's what they're for. This is a good trick for repairing stripped-out screw-holes.
Nah, sawdust mixed with wood glue is good for repairing a stripped out hole, or better yet, an actual wood plug glued into place, which will also expand when screwed into, creating compression that keeps the plug in place. You technically don't even need the glue, a simple plug of about the same size as the hole, will expand when screwed into, creating enough expansion to fill any small gaps and hold it in place. The glue would just increase the pressure by having those gaps already filled.
I've done this with stripped bolts on cars, just pack it with jb weld and thread your bolt in 3/4 of the way, wait til almost dry but not quite, thread all the way in, then when it dries, it's tight! When you wanna loosen it, comes right out and back in. All your doing is basically creating an anchor into the material you are bolting/screwing into. Nice video! You are a "thinker" and not too many of us left these days lol.
I do this trick, but in addition to the main hole, I use a smaller drill bit to put some small holes at a angle inside the main hole. It makes it almost impossible for the hot glue plug to pull out.
Ещё один гениальный способ применения термоклея, когда его больше не на что потратить. А мы, дураки, всё дюбели да саморезы используем, когда, оказывается, можно закрутить в стену винт)))
Расскажите сколько кг выдерживает данная конструкция на разрыв? И легкий пакетик выдержит и просто гвоздь в стену, а если повесть допустим дополнительно кг 20 или больше, клей карандаш деформируется?
I liked it! I've done similar things. I love hot glue. It's very versatile when making prototypes. And it also comes in handy for problem-solving. This video could use a part 2 showing strength testing.
They use a similar process when placing roof bolts in coal mines. The tube placed into the hole drilled into the coal has two separate compartments containing a resin mastic and a catalyst paste. Once the bolt is inserted it busts the container causing the two to mix seating the bolt in place.
Совет неплохой, но, по моему личному мнению - у термоклея очень плохая адгезия и тут лучше подойдёт клей по типу акриловых "жидких гвоздей", достаточно тот же самый болт покрыть тонким слоем графита для того чтобы всё прошло удачно
Excelente tutorial , muy buenas demostraciones , con la pistola térmica se pueden hacer muchas cosas , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia ( España) 🤓 😜
I work in quality engineering. I will replicate this experiment and do some durability testing using this on different materials like wood, steel, aluminum etc. Then after I have the results I will repost in this comment thread the results from the data for metrics like:
Torque and Angle limits
Breakaway Torque
Thread clamping /Yield strength
Durability @ different temperatures etc.
This should be interesting........
I think it will be a very interesting experiment. 👍
For reference, the experiment in the video above has not melted or caused any problems until 4 months have passed. Thanks for the nice comment. 🍀💚😄
Thanks
لا إله إلا الله. محمد رسول الله
La elah ela Allah. Mohamed rasol Allah
إنا لله وإنا إليه راجعون..سبحانك ياربنا ياعظيم
I would think maybe an epoxy or something like that would be more durable and stronger than hot glue.
Following.
감사합니다.
에구… 송구스럽게… 감사합니다. 😄
주말 마무리 잘 하시고 낼도 힘차게 달리십시요~🤜🤛🍀🍀🍀🍀🍀
Naturally, It is useful for light items such as clothes hangers and toilet paper hangers because its strength is weak compared to anchor nuts.
Thank you 😄
당연히 앙카나 너트에 비해 힘이 약하기 때문에 휴지걸이, 옷걸이 등에 응용하면 좋습니다. 감사합니다. 😄
й
оплпощилащахаоп
Х
Фууц будет без то как то не то не
I wonder about using an epoxy vs hot glue, for strength.
Hot Hot glue are much weaker than epoxy. Instead, it has the advantage of being quick and easy to use.
글루건 특성상 저온에서 모재와의 접착력이 약할뿐더러 습한 환경에서 목재가 팽창하게되면 글루건과 목재사이에 공간이 생길수 있습니다.
칼블럭과 유사해보이지만 대체용으로 사용하기에는 강성이나 내구성이 떨어지는건 사실입니다. 급할때 임시용으로 사용하기에는 너무 좋은 아이디어 같습니다~!
좋은 글 감사합니다. 좋은 하루되세요~😄
글루건으로 이런생각을하다니 정말 신박하네요
이 영상으로 글루건으로 여러가지 응용이 가능하다는걸 알았네요
잘보고갑니다
다음 영상이 기대되네요 ~
감사합니다… 혹시 키 복사… 그런 건 하지 마세요…. 😅
할아버지 되신 거 감축 드리옵니다 😄😄😄😄💚
The algorithm did it again. I had no business whaching this, but it was amazing.
Thank you 😊 Have a nice day 🍀
It was a waste of time
По секрету скажу, можно использовать саморезы для таких целей
Я думал суть в том чтобы не нажимать на биту)))
Тут секрет в нити.
@@Torba-B а кто нить знает где нить
Или дюбели
@@vovavoitov4203 нить только и вешать на эти сопли. Больше не выдержит
왜 이 영상을 전에는 못 봤었는지ㅠ책상 다리가 계속 빠져서 나무젓가락도 넣어보고 유튜브 나오는거 다 해봤는데 더 나무만 쭉 갈라졌네요~이 방법도 시도해 볼게요^^
안녕하세요. 어느 정도 헐거워졌는지 모르겠지만 구루건은 연질이라 효과 없을 수도(?) 있습니다. 에폭시 본드를 사용하면 좀 더 확실할 수 있고 또는 순간접착제+베이킹소다를 이용해도 강력하게 굳는 성질이 있습니다. 😊
It might hold a picture on the wall but theirs no clamping force the glue would strip threads out.
duh. its for smaller applications
Well, is it that much weaker than wood threads? It's debatable. Where are you thinking it would it fail? Wood-to-glue or glue-to-bolt?
@Potato 🤣🤣🤣 my favorite response!
I wonder what the tinsel strength of those glue threads are...?
@@One.Disgruntled.American Well, to measure tinsel strength I would have to get the Xmas boxes out, and it's way too early for that.
Спасибо, что подсказали. А то я всё время нажимал на биты и никак не мог делать нить. 😉
Теперь вот знайте - на биты нажимать не надо.
А я нажимал на биту и нить получалась.
They say that we have a bad hot glue. This is bullshit ))))
Ухаха. Наверно самый адекватный комментарий.
По делу: какая хуйня, дюбель проще, надёжней.
@@Bicus_ этого не может быть?!
오 신세계 입니다
저런 놀라운 방법이 있었네요
감사합니다
감사합니다~ 😄
자주 놀러오시고 좋은 하루되세요~💚🍀
와 역시 신박한 검은별님 아이디어 대박이심 멋져요
감사 감사~~~ 그리고 항상 해피데이 🍀😄👍💚🤜🤛🙋♂️
I wonder if you could do the same thing with a stronger glue. Maybe mixed epoxy or JB weld would be stronger. Would be interesting to test how much force it takes to rip out with the threads in the wood vs hot glue vs other things. Possibly some wood glues, superglue etc.
Try it and let us know
I've used it with jb weld on a few different applications it actually worked well. I wouldn't do it on something that my life depended on.
Yes I've done repairs but it's light duty there's other ways for heavier needs Honda had engs yrs ago would strip head bolt threads I'd take all thread and expansion sinks put in the block and make a stud it worked great and was cheap verses tapping oversized and drilling out head etc.....
@@knezie25yeah but thread that is tapped into wood isn't strong. Epoxy has such a good bond to wood that I would rather trust it more. But either is a moderately light duty type of connection.
Good post.
I do much the same with epoxy resin. Heat a bolt and coat it with wax. Fill a hole with epoxy resin. Press in the (waxy) bolt. Back the bolt out a few hours later when the epoxy is cured. You can always heat the bolt slightly, if needed, with a soldering iron. Now you have super good threads that can be remolded if they accidentally get cross threaded. Mine is a boat builder's technique.
Good comment...
Thank you 😊😊 Have a nice day 👍👍👍
I scan the comments for tips like this. Thanks!
Yep id trust the strength of J.B. Weld alot more than hot glue sticks, lol.
Думаю это будет куда прочнее чем то что показано в видео
Using glue to repair a vehicle that’s restricted to water use only. Great idea.
Greetings from Bangkok, Thailand. Keep up the good works.
Thank you 😊 Have a nice day 🍀
ขอบคุณค่ะ 😊 ขอให้เป็นวันที่ดีนะคะ 🍀
Title gave me a seizure. However this is very interesting I’ve never seen this method used before thanks for sharing.
Oh! Looking at the profile picture, I saw the same species as my dog… 👍🤜🤛
nice to meet you. Thanks for the comment and have a nice day 🍀😄
😆🤣
Same lmao
It's a decent idea for light duty but in reality you can thread into wood without glue or anything just think drywall is hung with screws lol now in light work on other materials it's not a bad idea
Thank you 😊 Have a nice day 🍀
Exactly what I was thinking. I actually took a screw eye with threads like this (didn't have a screw lag) and put it in a ceiling joist, directly in the wood, and it was able to hold a surprising amount of weight on it (over 200lbs)
@@JonathanHolt1988 yes bro I've pulled car engines with the same as your talking about lol carpenters and etc ..use lag bolts to hold beams and logs and etc ...the glue in wood isn't a good representation of the idea but if it's some different material then maybe yes
Since the bolt or screw is generally harder than the material you're going into, just pre drill out correct hole size and make your own threads with bolt. Works with plastics and anything else non metallic.
Exlent idea. This can be extremely useful in some cases
Thank you 😄
Have a nice day 🍀👍💚
Naahhh... just hammer a dowel in or any piece of wood available and shaped to the right size and use self tapping screws or regular drywall screws.
Great concept. There's much harder melting glues out there that could make it very tough and durable.
Bohning Ferr-L-Tite Hot Melt Adhesive Stick is what we use to mount arrow shafts to the arrow heads. And I just tried it, and it's like a really hard plastic once cooled.
Que cara inteligente. Ele fez uma bucha de silicone. Parabéns.
Obrigado 🤜🤛😊😊 Tenha um bom dia 🍀
오늘도 어딘가에는 쓸모있을 지식이 하나 늘었다.
감사합니다. 멋진 저녁 되시고 낼도 해피데이 되세요~💚🍀😄👍
I like the idea of hot snot but I've used toothpicks in many a stripped hole. Just jam a couple in, run your screw and it's solid enough for a door frame.
👍👍🤜🤛
Thank you 😊 Have a nice day 🍀
I've don't that too. Glit wood door frame gives out. Door won't shut. The old tooth picks & glue trick
I am impressed with the screw spot
🤜🤛🍀🍀🍀🍀🍀Thank you 😊
글루건으로 만든것 아이디어 좋네요. 근데 좀 약할것 같애요. 저는 에폭시로 했었는데 에폭시로 만든건 튼튼하고 좋습니다.
네 에폭시보다는 많이 약해요. 대신 글루건은 전문가가 아닌 가정에서 구하기 쉽기 때문에 접근성은 더 좋은 것 같습니다. 주말 잘 보내세요~^^ 🍀
에폭시가 뭔가요?
@@Mysteryp7그런거 있어요
@@나는꿀벌 그게 뭘까요
에폭시는 말랑한데 글루건보다 단단한 것이에요
천재야.. 영상 많이 만들어주세요
감사합니다~ 자주 들어주시고 좋은 하루되세요~🤜🤛👍💚
Ну теперь точно смогу нить, но нажимать на биты все же очень хочется. Спасибо и на том
Спасибо 😊 Хорошего дня 🍀
신박하게 글루건으로 칼블럭 만들생각을......
좋은팁 배워갑니다.
잡생각만 하다보니… 좋게 얘기하면 남들 안 하는 것만 생각하다보니…😅😅😅
감사하고 좋은 저녁되세요 😊👋💚
신형 칼블럭 개발하셨군요~^^
역시 항상 새로운 실험정신 멋집니다👍😊👌😃😍
남들이 잘 하는 걸 못하니깐 틈새 시장을 노려… 삐뚤어지게 가는… 🥺
새로운 한주 잘 보내셨는지요. 내일도 멋지게 홧팅하세요. 😄😄😄🍀🍀🍀👍
Идея хорошая ..полимер при нагреве немтабильный и при холоде достатосно хрупкий .....велосипед уже существует ...анкерный болт решит ваши все задачи
Если стена говно,то анкерный бесполезен
Не всегда
Пластмассовый дюбель вам в помощь. И быстро и удобно , и держать будет покруче.
Тут, видимо фишка в том, что если нет дюбеля ...и если не саморез а винт. Я лично, понял так.
соплями возится удобнее
What a briliant way it is!!! Liked & Subscribed!
Thank you 😊 👍🍀💚
Have a nice day 🍀
Спасибо за идею! Всё гениальное просто! 👍👍👍
Спасибо 😊 Хорошего дня 🍀👍
Надеюсь это сарказм был
오~~좋은방법 공유 감사합니다😍😍😍 👍👍👍👍
감사합니다 😊😊 좋은 하루 되세요 🍀👌👍
Единственное, чтобы я сделал - это делал бы отверстия обратным конусом в дереве, т.е. слегка вращал бы ось сверления так, чтобы входное отверстие было такого же диаметра, а в глубине расширялось, тогда бы точно клеевую вставку было бы не извлечь и оставалась бы только прочность клеевой резьбы.
Спасибо 😊 Хорошего дня 🍀
콘크리트 벽에 칼블럭으로 피스 박는 그런 느낌이네요 콘크리트 벽에도 사용 가능할 것 같은데 잘 보고 갑니다. ^^
네~^^ 화장실 구멍난 곳이나 플라스틱 장난감 볼트 구멍 부러졌을 때도 괜찮습니다. 좋은 밤 되세요 😄🍀🍀🍀🍀🍀
This is a pretty good idea, you can buy resin to put into concrete so I'd imagine you could use some wood glue with this or stronger glue
Thank you for comments 🍀👍😄
Good Job 👍👏
Thank you 😊 Have a nice time 🍀
полезное видео, теперь я могу нить, не нажимая на биты
потрясающе, ржу немогу🤣😂🙃
🤣🤣
Спасибо! Я научился ныть, не нажимая на биту. А то ныл только при нажиме! Спасибо!
Спасибо 😊 Хорошего дня 🍀
와~~아이디어 최강입니다
🙋♂️🙋♂️🙋♂️🙋♂️🙋♂️
해피데이 😄👌🍀👍
@@BStarCrafts 09l
아이디어가 역시 끝내줍니다^^
감사합니다. ☺️
멋진 밤 되시고 내일도 화이팅입니다 🍀👍😄
오.. 정말 기발하고 천재인듯한 아이디어이네용
혹시 강도는 어느정도인지 궁금합니다
감사합니다. 인장력은 아무래도 글루건이기 때문에 앙카나 번데기 너트 등에 비해 많이 약합니다. 옷을 거는 정도 또는 화장실 휴지걸이 수건 걸이 등에 응용하면 적당한 힘인 것 같습니다. 좋은 하루되세요 ^^
굿 ! 유익한 정보
헐거워진곳에 잘 활용 하겠네요
감사합니다. 좋은 하루되세요. 🍀👍😄
어머나!! 이렇게 좋은팁을 알려주시다니~언제한번 해봐야겠어요^^
감사합니다~~~ ^^
안전 목공하시고 좋은 밤 되세요~🍀😄👍
Exatamente!
Идея имеет право на жизнь! Разбитое крепёжные гнездо (отверстие) можно вернуть к жизни (восстановить) ! КЛАСС!! СПАСИБО!!
Спасибо 😊 Хорошего дня 🍀
Вот именно про эту ситуацию с разбитым гнездом я тоже хотел написать, но меня опередили! 😁
Так же подойдет для варианта с очень твердой древесиной, в которую саморез в принципе завернуть проблематично, да если еще и у самого конца бруска. Саморез обязательно его расколет по принципу клина. А вот вариант с клеем спасет ситуацию.
@@MAKAR_3.14, А что мешает нарезать резьбу в этой твердой древисине?
@@Chewed_Mole разве что отсутствие метчика под рукой!
@@MAKAR_3.14, Если учесть что мы имеем дело с деревом, резьбу нарезать можно и самим болтом/винтом.
Yeah. Wood glue is probably best with wood, whichever glue bonds best with the material. Tapping bits are mostly for metalwork. You can just drill a woodscrew directly into wood, that's what they're for. This is a good trick for repairing stripped-out screw-holes.
Nah, sawdust mixed with wood glue is good for repairing a stripped out hole, or better yet, an actual wood plug glued into place, which will also expand when screwed into, creating compression that keeps the plug in place. You technically don't even need the glue, a simple plug of about the same size as the hole, will expand when screwed into, creating enough expansion to fill any small gaps and hold it in place. The glue would just increase the pressure by having those gaps already filled.
@@peoplez129yep. wood glue, dowel, flush cut. Almost as good as new. Did that on my doors when the hinge holes were wearing out and it's good as new
I've done this with stripped bolts on cars, just pack it with jb weld and thread your bolt in 3/4 of the way, wait til almost dry but not quite, thread all the way in, then when it dries, it's tight! When you wanna loosen it, comes right out and back in. All your doing is basically creating an anchor into the material you are bolting/screwing into. Nice video! You are a "thinker" and not too many of us left these days lol.
Thank you for your kind comments and I enjoyed reading it. thank you 💚👍😄🍀🤜🤛
왜 맨날 쓰면서도 저렇게 사용해볼 생각은 못했던건지! 😳😍
제가 어릴 적부터 삐뚤어진 성격 때문에… 생각도 삐뚤…. 😥
김대규님이 지극히 정상입니다. 😄👍🤜🤛
Very good video, one question have you tried this on plexiglass?
Glue stick… Dremel glue gun
Thank you 😊 Have a nice day 🍀
Имеет право на существование.. 👍 для мелких работ идеально. Но дюбель-гвоздь быстрее и на разрыв крепче.
Спасибо 😊 Хорошего дня 👍🍀👌
I do this trick, but in addition to the main hole, I use a smaller drill bit to put some small holes at a angle inside the main hole. It makes it almost impossible for the hot glue plug to pull out.
Thank you 😊 Have a nice time 🍀
I wonder. Does it matter what type of oil you use for the release agent?
오ㅋㅋ칼블록같기도하네ㅋㅋ팁 땡큐합니다
감사합니다 😊😊 좋은 하루 되세요 🍀
Ещё один гениальный способ применения термоклея, когда его больше не на что потратить. А мы, дураки, всё дюбели да саморезы используем, когда, оказывается, можно закрутить в стену винт)))
Крышу бы так
))
If you do it with a good epoxy, it will be very strong. Great idea.
Thank you 😊
Have a nice day 🍀🍀🍀🍀🍀
Well, Well, Well.
I never thought of that.
Such a useful tip.
Thank you.
Thank you 😄
Have a good day 🍀🍀🍀🍀🍀
Nice idea.I like it👍👌
Thank you 😄
Have a nice day 🍀
@@BStarCrafts 😁✌️
🤜🤛💚🍀
Good job my Friend
Thank you my friend 😄🤜🤛
Have a good day 🍀🍀🍀🍀🍀
Расскажите сколько кг выдерживает данная конструкция на разрыв? И легкий пакетик выдержит и просто гвоздь в стену, а если повесть допустим дополнительно кг 20 или больше, клей карандаш деформируется?
Parabéns pelo vídeo, ficou boa a idéia usando cola quente👍👍
Obrigado 😊😊 Tenha um bom dia 🍀
@@BStarCrafts para vc tbm 👍👍
Nice. Not a bad idea for lighter applications
Lighter application…. Collect!
Have a nice day 🍀 Thank you 👍😄
브라보 ~!!👏👏👏👏👏
일상에서 간단하게 응용할수있는 좋은아이디어입니다 😊😊
올린 영상의 의도를 정확히 파악하셨네요.. 👍
감사합니다. 좋은 하루되세요 🍀😄
* 이번 영상은 대단한 건 아니고 탭핑 비트나 가시 너트, 번데기 너트 등 구하기 힘든 일상에서 응용하면 좋습니다.
Що
@@BStarCrafts k. Job 99mkk
영상봐도 무슨 효과인지 모르겠어유.ㅠ.ㅠ
J'aime cette méthode!!
Merci. passe une bonne journée 😄🍀
와!! 좋은 정보 감사합니다~!!! 정말 신박한 아이디어네요 이런채널을 이제야 알게되다니! 구독 꾸욱 누르고 가야죠~~~~!
감사합니다~😄
멋진 하루되세요~~👍🍀🍀🍀🍀🍀
Anche per me in quel cimitero un qualcosa c'è...Bravissimi ❤
Grazie. 😄👍 Buona giornata 🍀🍀🍀🍀
Ese tipo de rosca nones para madera se safa cuando le das torque...aunque para colocar tarugos en la pared anda perfecto 👌
Gracias por el consejo. Que tenga un lindo día 😄🍀
'글루건' 영상 잘 봤습니다. 👍
신기합니다!
감사합니다 😊😊 좋은 하루 되세요 🍀
I liked it! I've done similar things. I love hot glue. It's very versatile when making prototypes. And it also comes in handy for problem-solving. This video could use a part 2 showing strength testing.
😄😍👍🤜🤛🍀
They use a similar process when placing roof bolts in coal mines. The tube placed into the hole drilled into the coal has two separate compartments containing a resin mastic and a catalyst paste. Once the bolt is inserted it busts the container causing the two to mix seating the bolt in place.
Interesting bit of ingenuity there. I'm curious on how well flex seal may do for more weighted objects now.
Thank you 😊 Have a nice day 🍀
정말 잘 배우고 감니다
유용한 정보 제공에 감사 드림니다 #양삿갓티비
감사합니다 😊😊 좋은 하루 되세요 🍀
Wanna try with 2 part epoxy, maybe I'll use heavy grease for the bolt...
For use with epoxy, hair spray works best.
I've had good luck using paste wax.
Bon travail je suis fan de votre idée 💡
Merci. 😊😊💚 passe une bonne journée 😄🍀
Great. You are a good man. Thanks 👍🌸
Thank you 💚😊 Have a nice day 🍀
멋져요
감사합니다. ☺️
편한 주말 되세요~ 🍀🍀🍀👍
Clever hack. That’s great. Cheers 👍😎🇦🇺
Thank you 😊 Have a nice day 🍀🤜🤛👍
Je fais pareil avec de resine epoxy et huile et ça tient très bien . Good job
What kind of glue is used in this video? Cause i wanna try this at home and i want to do nothing wrong
I used Dremel glue sticks.
Thank you 😊 Have a nice day 🍀
Совет неплохой, но, по моему личному мнению - у термоклея очень плохая адгезия и тут лучше подойдёт клей по типу акриловых "жидких гвоздей", достаточно тот же самый болт покрыть тонким слоем графита для того чтобы всё прошло удачно
И далеко не у каждого есть клей и пистолет дома
저걸 글루건용 스틱말고 건축용 경화 실리콘으로 하면 열에도 강한 결과물이 나오지 않을까 싶네요
네 그것도 좋은 방법입니다. 일반 가정용 글루건이건 경화 실리콘이건 주변에서 쉽게 구할 수만 있으면 좋은 방법인 것 같습니다. 주말 잘 보내세요. 💚👍🍀
👏👏👏 só não pode apertar muito que a rosca espana, porém para objetos pequenos e leve e uma ótima idéia. Parabéns 👏👏👏👏
How long before it wears away ... Or better, how many ins and outs
Simplesmente incrível 👍👍👍 parabéns amigo 👏👏👏.🇧🇷🇧🇷🇧🇷
Obrigado. Tenha um dia maravilhoso hoje também 🤜🤛🇧🇷🍀💚😄
Porque increíble si existen los taquetes
Never understood the title but clicked anyway, good job man
Thank you 😊 Have a nice day 🍀
Excelent solution, thank you very much for sharing
Thank you for watching and good comments 😄
Have a nice time and good luck 🍀🍀🍀🍀🍀
Thanks for sharing video. 👍👍
Thank you 😄👍
Have a nice day 🍀
Excelente tutorial , muy buenas demostraciones , con la pistola térmica se pueden hacer muchas cosas , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia ( España) 🤓 😜
gracias. Le deseo a usted, a su familia y a todos sus amigos felicidad y buena fortuna. quiero ir a España 💚💚💚💚💚🇪🇸
La idea es buena. Pero con silicona es muy endeble y fácil que la rosca se dañe. Hay otros materiales que al secar quedarían más firmes.
Obrigado 😊😊 Tenha um bom dia 🍀
Not a bad idea, I can see this as useful in certain situations.
굿아이디어 이네요~
사용하는 용액이 무슨?
일반 시중에서 파는 글루건이예요 😄
좋은 주말되세요 🍀
혹시 오일… 오일이예요… 아무 오일이나 상관없습니다.
Respeito e Gratidão irmão, parabéns!!!
Obrigado 😊💚💚💚🎁🎁🎁😊 Tenha um bom dia 🍀
Good idea. Useful, especially in plastic parts where thread got damaged or broke.
Good comments… Plastic toy… etc
Thank you 👍🍀🍀🍀🍀🍀
Superbe idée, merci pour votre démonstration.
Je vous remercie. Bonne journée et bonne chance 🍀🍀🍀🍀🍀
새로운 영구를 잘합니다 기대됨니다 😊
🤜🤛👍🍀💚 감사합니다 😊😊 좋은 하루 되세요 🍀
Отличная идея. Всё гениальное просто.
Спасибо 😊😊 Хорошего дня 👍🍀👌
Это работает если отверстие идёт конусом, то есть расширение в глубине,
@@alexander7731 интересно, в газобетоне будет держаться?
@@Duh_Poznaniya газобетон придумал дитя сатаны в нем нечего не держится
@@alexander7731 согласен! Но деваться было некуда ☹️
감사합니다!
좋은 하루되세요 🍀😄👍💚
동영상 클립 감사합니다!
형님 좋은 아이디어네요~신박하네요~^^
굿모닝 선화~
대박 한주 돼~~~ 가족 모두 행복과 건강하고 🍀😄💚👍🤜🤛
선생님! 멋진 아이디어 잘 보았습니다. 오일은 어떤걸 쓰면 될까요??
안녕하세요. 글루건과 부재가 접착만 안되면 되니깐 식용유건 목공 오일이건 아무거나 상관 없습니다. 좋은 하루되세요 ^^
Brilliant idea and a great video
Thank you 😊 Have a nice time 🍀
Super nice 👍
Thank you 🤜🤛😄
Have a good day and good lucky 🍀🍀🍀🍀🍀
Very good well made video! Thanks! 👏👏👏
Thank you 😊 Have a nice time 🍀
Thank you from Brazil ^.^
🇧🇷🇧🇷🇧🇷🇧🇷 Obrigado 😊😊 Tenha um bom dia 🍀