Jaguar / Land Rover - Active engine mount testing process

Поделиться
HTML-код
  • Опубликовано: 24 янв 2025

Комментарии • 4

  • @DiesIre888
    @DiesIre888 Год назад +4

    A vacuum leak through the torn engine mounts is a more serious problem than it may seem. In a 4.4-liter diesel engine, this, combined with a few other factors, led to engine failure. Those who own or service these cars are familiar with the additional oil drain pipe from the turbo. What they often don't know is why the oil doesn't drain as intended and calculated by the engineers who designed this car. There should be a slight vacuum in the engine crankcase under normal conditions, allowing the oil from the turbo to drain into the crankcase even without the additional pipe. However, when there's no vacuum, the oil stands and begins to seep and enter the intercooler pipes from the turbocharger, from where it eventually enters the intake. The vacuum in the engine disappears when there's a loss of vacuum due to the way the vacuum pump is designed-it pumps air out of the vacuum system and into the engine. Usually, this is a small volume, and air in a sealed system quickly runs out. But in a leaky system, air is constantly pumped into the engine.

    • @micuflorin1460
      @micuflorin1460 28 дней назад

      Only on v8 petrol? What about the v6 diesel?

  • @micuflorin1460
    @micuflorin1460 7 месяцев назад

    In my case, jaguar sdv6, hole is fully closed. Good or bad?

    • @lipecardozo
      @lipecardozo 29 дней назад

      According to the video, really really bad. Replace it.