Improved Soft Shackle
HTML-код
- Опубликовано: 21 авг 2024
- An Improved Soft Shackle tutorial
for the maximum strength in soft shackles,
Lightweight Carabiner replacements.
Ideal for hammock suspension :)
To contact me / my channel / About / View Email Address
Like, Sub, Share :)
All things Wild Camping.
Tacblades channel / tacblades
Links:
Original research and load testing for this design. goo.gl/7LeKaS
![Eminem - Somebody Save Me (feat. Jelly Roll) [Official Music Video]](http://i.ytimg.com/vi/Vwa0HenQMi4/mqdefault.jpg)
Made 5 years ago and still one of the best how-to's. If you're still around, we'd love to see more.
I've used this 'how to' as the template for IS-Shackles which replace all the very hefty steel shackles on a Jordan Series Drogue - a life-saver device for small boats in big storms. I'm using 12mm Dyneema, and with Dyneema anti-chafe woven tubing slipped on. It's idiot-proof, doesn't rot under UV, and I can double 'em up with a spare set which I've made.
Seems so much better than the button knot designs I've seen. Great job.
This is why I watch a dozen videos before I make. A true gem.
Thanks from across the pond (Connecticut) USA. I’m a fond follower.
This appears to be so much simpler than tying and tightening a diamond knot, and stronger to boot! A little bit of protective sheath would make this perfect.
This is the easiest way explained to make a soft shackle. Thanks. I made two sets for my hammock system. I'm leaving the metal carabiniers home.
This is the best way to make a Soft Shackle that I have seen so far.
Love your design. It's simple and works well. I shortened the start length to 40". The end loop is 3" which is perfect for my setup. Thanks for the video!
This is the best tutorial on this that I have found. Thank you so much
just starting with Amsteel hammock rigging and because of to your efforts...I'm successful ! Thanks from New Mexico.
That's awesome :)
I Liked this, so much so that when i was looking for a tutorial to make an EVO loop and failing to find one I realised it was essentially a soft shackle but without the slip/adjustable loop at the end. With 40" of cord you end up with about an 8" loop with the knot on the end.
This is, absolutely, the best soft shackle version. It's simple and easy to create and use.
Very well done and I really like that there are no loose ends. Cheers!
This uses a knot that I can trust not to come undone, very important for hanging a hammock. I've heard reports of the regular soft shackles coming undone under tension--not a problem here since the ends are buried and run back through the knot. I used these to replace the heavy carabiners on my hammock suspension. Thanks for the excellent instruction.
Katherine Starbird thanks for watching. :)
What an eye opener. While I like my Dutch clips for my hammock tree straps, they do cost $$. These improved soft shackles have a less fussy open/close than the soft shackle that I've considered using for tree straps in my other hammock kits. Another advantage over Dutch clips: these won't take the paint off posts in urban hangs.
MEGA thanks!
Rope is fun!
No problem, ulta light, ultra strong, love them.
This is an extremely helpful video. Thanks so much for making it! At the end of the video, you said you would try the same method with lash-it or zing-it, but I haven't seen a follow up video. I did a bit of experimenting with 1.75mm lash-it and found that your method worked quite well. I settled on a 32" line length, 4" bury, and 1.25" loop.
It’s likely someone already mentioned this, but I can’t go through all the comments ->
If you tie a small loop in thinner cord around the “working part” (i.e. through the hole in the middle that you feed the longer part of the rope through), you can use it to open the shackle without fiddling, even with your gloves on. I doubt it degrades the shackle integrity much, if at all.
Thank you for sharing the knowledge, Tac Blades.
Are you sure that it applies to this style ?
That actually seems simpler than the diamond/button knots I used before. With those I had to follow a step by step every time I made them. Course I only made 5 or 6 but still. This way uses a bit more rope but is stronger.
Thanks for this Tac Blades. I have trouble with the button/diamond knot. Most elegant design.
Thanks Tac! This and your UCR video have both been super helpful. Great close camera shots and I really appreciate the details you share about sizing and length as you go along. It really helps me keep track of my own piece and keeps me at least close to where I should be.
That ending finish knot looks like a barrel or scaffold knot but passing the tail loops traps the finish. Very nice.
Great video. Clear. Easy to understand. I found this method much easier than the button knot soft schackle (watched a lot of videos and wasted a lot of time trying to get the button knot right). I made four sets of theses for grand kids' hammocks in fairly short order. Also liked the celtic soft shackle version in the separate related video.
MTTAMcCall thats great these are much eaiser to make a safe knot too.
Tac videos are the best!! I’m learning a lot from your easy to follow video instructions. Please don’t give up providing such great posts.
From Jim across the pond in Connecticut.
Thank you Tac Blades. Following your video yesterday I made my first two dyneema Whoopie Slings, immediately changed out the webbing on my hammock-hanging in my living room as I sort it out for camping. Great video. This morning, in about 20 minutes I made my first Improved Soft Shackle. Really good instruction. Much appreciated.
Will Nettles no worries glad it helped you :)
I have so much trouble with crown knots. The idea that I can gain more strength and avoid tying one altogether is brilliant !!!
Thanks, it is simpler as its very easy to create a bad diamond knot that is weak but you cant tell, so this i think helps with that problem. :)
Thank you for the lesson! Very good. Maybe just one wish, if you could present your measures in both inch and mm. That would be a great help for us from Mars. Cheers!
Good work, thank you for your video!
Just made two following your instructions. It's a hell of a lot harder than you make it look! Lol Anyway, made two. They seem firm and strong, although I haven't tried them out yet. That'll have to wait for my next wild camp when they'll be used to join my hammock whoopie slings to tree straps. Fingers crossed! Thanks, great video, excellent design.
Awesome video! Your way of making the button is very easy to follow and looks superior to the classic diamond button knot. Instead of doing the noose portion your way, I just made a lark's head on the opposite end of the button to serve as its lock. Doing this makes a stronger noose.
After commenting, I scrolled down and saw your comment about the Lark's Head squeezing the neck of the button which makes it weaker. It really makes sense! The beauty of your way to make the button is how easy it is to undo it. I will redo one "YOUR WAY" and have one with the Lark's Head and call it a day! Thank you so much for your awesome videos.
TAC Blades,
Just F.Y.I. I used two 36" long pieces of dynaglide to make my pair of shackles. With each piece I folded the length in half and then made my marks for the brummel lock on each end at 6" and then 7" to result in a smaller "tiny loop", but still maintaining a 6" bury per your instructions. This results in a shackle that is 3" long shackle that weighs ~2.5 gms. These shackles seem perfect for connecting my 7/64" amsteel whoopies to tree straps.
I am going to make a couple of these dynaglide improved soft shackles using your method (which I really like!!!) and send them to Dutch who had offered to do failure testing. I'm betting your 230% stronger claim is right on.
Andy
R. Andrew Moore, Just curious, what did Dutch find out regarding that load testing on Gary's (Tac Blades) version of soft shackles? ATB
How'd the tests go?
Easy and accurate details!
Thank you so much.
I'm re-watching this playing with the soft shackle I just made.
Best version of the Soft Shackle. Just made a few for my kit. Thanks.
Good to hear i have made load never let me down, i am about to try and make one from 1mm dyneema!!!
Thanks for this. Your instructions (and measurements) are very clear. Made some of these myself now. Excellent video - post some more!
Thanks, great stuff, they come in very handy :)
Excellent. I can do the locked loop but have always had a problem with the diamond knot, so this looks actually easier for me. And I have a good length of lash it around to try with. Thanks.
No problem have fun :)
Perfect instructions. Great video. Thanks for putting it together and sharing. Looking forward to making some shackles for my hammock setup now.
That is an excellent alternative, great video ! Thank you
Thanks for posting this, I finally got one of my required soft shackles done, about to make the second. The Button knot was giving me a fit.
Wow, a bit more line but so much easier to create while getting a much improved button
Great video. Thanks
the best video tutorial!
Jeez another fantastic video, thank you for sharing. Again I was able to follow, blind guy, absolutely awesome. Thank you Soo much.
The Blind Lock Picker
Rob in Connecticut😎
Wow i have only just realised what you wrote, i will bear this in mind for the future.
Beauty. less wastefull and stronger than a diamond knot, thanks mate!
I missed getting one of the buries long enough. Still a good knot. The overhand, though, is very big. I think I will stick with the button knot. I started with 60" and ended with a 3-1/2" shackle.
Very clear instructions. Thank you
Thanks for the great video! I used a carpet repair needle instead of a fid or wire for a fish, worked great!
Hey Mr. Tac Blades…glad to see you back (on your time to talk video) as worried a bit that you had succumbed to an event or health issue. Happily no and have used your previous videos such as this cone as a resource as you explain and demonstrate very well. Like I had read somewhere had you been my teacher way back in school I would have excelled.l Anyways while your off on the “watch” interest side of things to review would be interested also if you decided to include cuckoo clocks ….ha you not even started yet and getting requests. ?Take care and good to see you back.
Lou (Canada)
Wow i have zero knowledge of cuckcoo clocks, not even sure i have actually seen a real one in my whole life :). I am sure the viewers are not ready for the new approach i am going so buckle your seat bealts its going to be a roller coaster of a ride.
This video was very helpful to me. Thank you very much for all the effort you have put into it!
No problem glad you enjoyed it :)
Excellent demonstration. I get it now. And because of the bury, the cord is also double-thickness where the loop tightens around it just behind the knot. As I understand it, that's also a common point of failure. As far as I can see, this design of soft shackle shouldn't ever become over-tight around the 'neck', and I can see now why the knot will never invert.
But what I like best about this shackle design is that I can visualise it completely. That complicated diamond knot looks nice, but because it's more complicated, I'd always worry I'd got it wrong in some way. The double overhand knot is known to be very effective. I know climbers who will use a simple double overhand knot to join two ropes that their lives hang by. Ugly, but simple and reliable, ...and can be done with gloves on.
I've watched a few tutorials on making soft shackles, and this is the best by far. It also convinces me that this is the best kind of shackle to use, (...unless you really must have a single-loop design for the sake of neatness.) The fact that is has 240% of line strength rather than say 130% presumably means you can use thinner line.
Paul Mackilligin thanks for the comments. For hammock use and camping use i feel this is stong enough with plenty of safety margin for all uses at any weights.
I know people that have made dynaglide shackles this way and its good for them.
The only complexity is that the thinner the cord the smaller the radius in the turns and therefore the weaker, also the bury length needs to be proportional the diameter of the cord so quite tricky.
I'm actually looking to replace all (most of) the nasty steel fittings on a sailing dinghy. Stainless steel shackles with clevis pins and those tiny, tiny spiral wire retaining clips (which can be lost forever even if dropped in a grassy field, let alone if dropped in the water) ...all that stuff has to go. Planning on replacing the wire shrouds with Dyneema too if I can. It's mainly for safety though, as the hard metal stuff can cause real injury when body parts collide with it.
The cord you used in the video, what size was it? It looked about 6mm (?) I was thinking of using 4mm or even 3mm.
Paul Mackilligin this is 7/64th amsteel, in uk this is 2.5mm see here goo.gl/KTpHgO 726kg breaking strain, you can get thicker tho, also floats :)
Oh, OK, a optical illusion then. It looked much bigger!
100% simpler than a button knot! Thanks for the clear instruction
Really cool Gary. I will give this a try. I haven't had a failure, but these are so lightweight and packable why not. Thanks and excellent video.
No problem, anything new with amsteel has got to be on the try list :)
Great video
Wow, that is super simple. I'm sure much easier than a diamond knot.
I love this method!!! Thanks for great tutorial!! I will be making these soon!
Thanks again for this great tutorial. Used this method of making soft shackles for my Grappler Hitches on my hammock suspension. Brilliant! G-Nut
No worries thanks for watching :)
This is brilliant.
I made one, from 4mm x 120cm dyneema I got a huge knot and a 21cm long shackle (tail below the knot) and only 9cm closed shackle, measured inside.
I tie my own soft shackles, This is how i will tie them from now on. Ever try it on 3/8, the big 22k rope? someone sound off and let me know.
Thanks for the great tutorial. You have a new subscriber. Cheers.
Thanks. I like it.
Love it ! Thank you .
Thank you! This is very helpful.
Brilliant. Thanks
very useful😊
Very nicely done. I am a professional Stunt Rigger and I really enjoy your videos. This video is a bit dated so I ask you; is this still your preferred method for making soft shackles? Thank you for you very nicely presented and digestible work.
Cheers yes i still make them this way, i have not found better.
@@TacBlades Have you seen this new "universal loop" that Jeff Myers presented recently? I'd love to hear what you think of it (and compare it to "improved soft shackel"), and to see your DIY tutorial for it.
@@zbabic jeff has some great ideas and all the loop shackles and devices work pretty well. I like the improved soft shackle because its simple, anyone can make it and has never let me down.
Thank you so much ,this knot I can tie those other knots had my brain in a twist
A noose. That's what that loop single closing loop is, a noose.
Brilliant
thanks Gary soft shackles sorted
Carn Moorhouse cool :)
Hi there. Awesome clip, making it very clear and easy to follow. Wondering if you could provide the various lengths required for different diameters please? Apologies in advance if you have already provided.
jasequick you will need to experiment a bit i havent used many other diameters :)
Tac Blades so does that imply that all the buries etc are changed proportionately? If I reduce the overall length by half, then the buries are halved etc?
Tac Blades I’m thinking that most things (including the loops and buries) have to remain constant irrespective of the shackle diameter, in order to continue remain buried past the knot, and allow the rope to pass through etc. I think I answered my own question. 🤣🤣
jasequick yes keep burries same the burry length is a factor of diameter of cord and friction
That is brilliant! Great video brother. I just got some on eBay that look similar to yours to use on my bridge hammock webbing to the tree.
KdawgCrazy many thanks that are fun to make :)
Much easier than the standard chinese button knot or daimond knot versions
Great video, thanks a ton for sharing. I've been looking for a good soft shackle to connect whoopie slings to the continuous loop on my hammock. I'm going to try making some out of Dynaglide.
Thanks, i know some use dynaglide for ridgeline but i wouldnt hang off it i like at least a 5:1 strength ratio to cope with dynamic loads :)
+Tac Blades Do you know what the rated strength of Dynaglide is? I believe Dutch has tested it to 900 lbs. I'm pretty light weight.
+Mark Bishop its 1000lb and amsteel 1600lb
+Tac Blades some people do hang off it, but take care :)
Why would someone choose the Button Knot over this?
This is an amazing tutorial, thank you so much for sharing. I really like the tools you use, can you share a little about them and where we can purchase them.
Joe Moreno thanks you can find them on ebay, look for loop tuner 10" and awl both are very cheap.
I made several of these the other day, without the little constrictor loop, in less than an hour while watching TV. Today, I was fiddling with a continuous loop and made one of these with that. I'm wondering why this wouldn't be a good way to make these Improved Soft Shackles? It is even easier than with the dogbone, and a wonky-looking knot is a wonky-looking knot, right?
It seems that making a knot takes up about 4 1/2" of the CL. If the formula for making a continuous loop is SL=(FL+6)2, where SL=Starting Length and FL=Finished Length, then the one for the ISS using a CL would be SL=(FL+6+4.5)2. Looking forward to your comments.
You would have to explain more how you made one with a continuous loop ?
@@TacBlades Just made the knot by doubling the loop at the center of the buries. Then the tail through that.
@@howdydoody30204b tight knots in dyneema can weaken the cord up to 50% thats why the knot on this one is larger and around large back spliced diameter cord. It has been tested in repeatable stress tests for strength and safety. So i am confident to share with others and not to put others at risk.
But there are many ways to do it so for your own use you can try what you like and works for you.
@@TacBlades I understand, and this is how I look at it. The resulting (I)SS can't be any weaker than the CL and will probably be considerably stronger. I would not sell them to another person without considerable testing, which I do not intend to do, nor give to another person w/o the advice to use at their own risk, but for my personal use, this is absolutely how I intend to do it. If I break anything important, I'll let you know, provided I am still able. :)
@@howdydoody30204b yes any feedback would be very interesting thanks. Samson has interestig data on fibre compression and reduced strength.
you presented it very well, im new to these types of knots and will be using them in vehicle recovery. i do have a question though,would it take the weak point away from the loop if there was a sheeps head there for the loop rather than going thru the center of the body of the rope? i hope i was clear, i dont know all of the terminology yet. thanks tim
I know what you mean but in testing it was weaker, when you compress dyneema in a knot it can reduce the breaking strain up upto 50% but i would definitly make a few and try both, i use a larks head sometimes, take care as it can jam under a lot of pressure.
@@TacBlades how are you testing these knots i am interested in this
@@TacBlades it is a larks head knot not a sheeps head knot i was talking about, someone called a sheeps head on a video. lol
if useing a larks head can you use a tab or strap under it to pull it loose? just thinking
Any reason these couldn't be used as enhanced continuous loops? especially without the noose and a longer loop? I just got into whoopie slings and think this design has
a lot of potential.
I think they could not sure if you would need a bigger knot, am not really sure.
I know this is old video and hoping you're still monitoring the chat. Really enjoyed the video and hoping to make some of these but I can't find the tools you're using (which I like better than typical fids). Do you have some info or links that would help me track them down? Thanks!
Ty look for awl on amazon
Brilliant video, great soft shackle. Great idea. Where did you get the amsteel? Thanks for sharing.
Thanks for watching, i import mine from america but you can get it from DD in the UK
As a sailor, not using rigging vocabulary just kills me! Nice shackle though!
Duplicate this in your own video using the rigging vocab. I bet it would be interesting.
What length does the finished shackle end up? I want to make one that is 4" long so looking at this think I need to start with somewhat less than 48" of line. Great instructional video by the way, thank you.
Great video! Thanks. Question: For the adjustable loop, are you measuring "just over a half inch" from the outside of the loop or the inside? I assume inside, but, since dimensions are critical, I would like to be sure.
Jere Moore when you measure its just over half an inch on the outside measurement.
Thanks. I whipped up two of these pretty quickly. Easy peasy.
Very nice, Thank You.
No problem thanks for watching
So I think you did another version of this, but I can't seem to find it. Same thing but I think you had a prusik of some sort to lock it in
Thanks!
Hi, I have a question about your version of the soft shackle: did you have it tested at the 230% strength or is that number based on l-36.com/high_strength_soft_shackle.php ?
I really like your version because of how the tails of the eye splices are throughout the knot and into the part that the loop goes around. This seems to eliminate the weak point of where the tails of the button knot get buried with the other version of the shackle.
I just found the answer: www.balancecommunity.com/slack-science/comparison-soft-shackle-methods/
Excellent video man, thanks for sharing!
4' of line, how big of a loop does it make. You also made it look easy with your step by step thanks
Armando Veloz i think its about a 6in loop
Looks a really good strong one. I will try definitely try to make that one as well. Atb Glenn.
Its a great design, there is a link in the descriptionto the research and testing :)
+Tac Blades Thanks I will check it out now.
Would a bead on the adjustable loop to stop pull-through be usable, or would it prevent proper locking?
Should you still be around, I'm in North Queensland, Aus, where everything is slow. Hence the late request.
Guidance required, Where can I get a FID, for splicing Dyneema, as shown in your great video? AMAZONis probably my best source of gear.
Help, appreciated.
Cheers
RJT NQLD
Try searching for Awl on amazon
Wow, what a range of available products. Could you please narrow down the selection to what I would need to make shackles.
Cheers
Rodger
I played with this a bit, and came up with a slight alteration that is even easier to make, and has a few additional uses. How can I contact you to show you? RUclips doesn’t allow PMs any more.
Wonderful video but I made one with a larger diameter dyneema & realized that the 'bury' & all the measurements are different for bigger line. Can anyone point me to a guide to measurements for different size line? Mahalo Chris in Hawaii
Hi, thanks for a great tutorial! What is the purpose of the center " locking" loop? Why not just make a larks head around the knot? I assume larks head affects the strenght but i'd like to know. Thank you
Ola Andersson you can larks head and it would be ok but it would loose a lot of strength, as the larks head compresses the cord and this is then weaker in theory, but i do make a larks shackle as well and its just fine :)
I appreciate your essy to understand instructions. I do have one question: the specifications you provide are for a 4" loop, how would I calculate the measurement necessary for a 2" loop? Thanks
Not sure because of the length of the buries is minimum needed for knot and strength it might be the minimum size you would have to experiment.
Would you use the same measurements on a larger diameter rope?
No it would all have to be adjusted, for lots of reasons, especially the back splices. Trial and error is a good way, but it would have to be tested to be sure.
How do you think this would work, in place of a continuous loop, binding the top of a hammock? Then you could open it up, attach directly to your straps, or the closed end of your Whoopies, or whatever. The knot at the top might even make for a good anchor for a Ridgeline?
Five Family yes it would work maybe need to make it a bit longer.
Tried it out, using your guide and measurements, worked perfectly for replacing the heavy cord and steel carabiner in my double. Thanks! Now I can skip the carabiner there altogether, and I think the knot will work good as an attachment point for a ridgeline.
Five Family awesome nice work :)
Nice....
Thanks for the video! Which variant would take to make a loop of the same length, this or a button knot? I've tried to watch different videos and it's confusing, it looks like your method uses much more material to achieve the same length, or am i wrong?
It it using more material, mainly because i use the good length of bury for safety and also the end result is a much larger knot than the button knot so uses more material
Great tutorial! super easy. I've made 2 sets. I have a question. What is the tan or wood handled tool you use to divide and widen the Amsteel with? Much better than what I use.
Thanks it's one of these
Handmade Awl www.amazon.co.uk/dp/B01G699ZJ0/ref=cm_sw_r_cp_apa_i_YST9CbS5G33E8
Should have guessed that would be a UK site, but I did find it on ebay for only $5.50 (US). I made 2 of these with 1.75mm zing it for hanging my tarp... FIDDLY! Thanks again!