U660E Po ba yan? Wala pong speed sensor? Paano po check if faulty yun speed sensor? Nawala kasi trc and cruise control ko. P0500 code. Nag reset pero pag andar bumabalik fault. Hindi ma detect yun speed.
Pag ang speedometer sa cluster is gumagana .kylangan i check sa Scanner kung gumagana o hindi or nka zero lng ang vehicle speed sensor.pg hindi ng reading need i check ang abs wirings kc kasama yan p0500 sa abs cignal.
Thank you for the video. I have 2014 camry SE 2.5 it looks like they have the same valve body as this Lexus I had P0500 code and on the process of changing the VSS and valve body but is it worth changing that if was grinding when I was trying to change the gear? And it does not engage in gear. Thank you.
P0500 Vehicle Speed sensor code..the sensor is located at the valve body assembly so need to remove it if replace new.and also check the ABS system theres connection for that code.
Hello sir, can you pleaseeeeeee give me a tip or 2, I ve been trying to fix my 2007 IS250’s A960E gearbox’s P2759 for 3 times already, changed ATF each time, filter changed, SLU Solenoid and wire already replaced, however P2659 still exist. What else can I do? Should I use contact cleaner to clean all the wires, adaptors and solenoids next time before I put new ATF in? Thank you so much!!
Thank you for your rich explanation, but I want to ask about a problem that occurred with me. I own a 2013 Avalon Model and I have been facing a problem now for two years, which is when I want to start and put the car on D, then it does not respond and delays by five seconds. The codes did not appear for me when checking, but two days ago I was surprised by the appearance of a code P2714 I am in the process of changing the oil regularly and I do not know if the sensor or the solenoid has started to show faults and if it is about to stop. Please reply. Thank you Lakay
P2714 Or Pressure Control Solenoid Stuck off.meaning there is a problem from Solenoid malfunction detect from the ecu. Two possible reason.Internal failure or Solenoid malfunction. Go to the nearest Transmission Specialist for Maintenance.
Greetings young fellow, 2011 Toyota Avalon: installed used transmission and has been driven for additional 174,000 miles (280,025 km) total mileage on this vehicle 439,000 miles (706,502 km) fluid change at intervals of 40,000 miles. Slipping from 1st to 2nd. Scan tool reads: P2714, P0796, P0746 - Pressure Control Solenoid (A, C and mainly D) when resetting Memory Code and Compensation code goes back to somewhat normal shifting but if abruptly accelerating or driving uphill takes place will trigger code again, fluid smells and looks ok and not missing any. Technicians in NYC recommend: Transmission rebuilt or another used one. Thank you for providing your opinion in this case. All the best!
If you cleared or reset in the scan tools and back to normal.try to change the TCM of the transmission.maybe gonna be ok .but if the oil is burn need to rebuild.
Hi again Ar, in New York summer was consistently hot 34⁰ Celsius, I purchased a used TCM will arrive in 2 days, but meanwhile temperatures have gone cooler past few days to 12⁰ and tranny is shifting much better and trouble codes dissa
@@ararlakayvlog2684 thank you Sir. I changed my u660e fluid because it had hard shift from third to fourth gear, when changing fluid noticed metal shavings maybe my problem could be because of valve cover? I still have the problem
Natututo nako magmekaniko dahil sayo bro😊
Hehehe...thanks Bro...🥰😁
THAT'S RIGHT" U VATOS JUST SAVED ME FERIA I DON'T HAVE" TIME I DO" GRACIAS FOR MAXING THIS VIDEO"
shukaran sadik for sharing your tips god bless you.
Thank you bro .for sharing your talent..Gid bless you more.
U660E Po ba yan? Wala pong speed sensor? Paano po check if faulty yun speed sensor? Nawala kasi trc and cruise control ko. P0500 code. Nag reset pero pag andar bumabalik fault. Hindi ma detect yun speed.
Pag ang speedometer sa cluster is gumagana .kylangan i check sa Scanner kung gumagana o hindi or nka zero lng ang vehicle speed sensor.pg hindi ng reading need i check ang abs wirings kc kasama yan p0500 sa abs cignal.
GOD BLESS YOU BRO
Galing mo lakay!! Salute
Thank you boss👍😁
2007 lexus ES 350 fourth shift delays , there is no codes, the transmission has to be rebuilt or that can be the problem with solenoids ? thank you.
If no fault code no problem with solenoid.that is mechanical failure so needed to rebuild .
Salamat sa video master lakay. miya miya👍😁
Thank you for the video. I have 2014 camry SE 2.5 it looks like they have the same valve body as this Lexus I had P0500 code and on the process of changing the VSS and valve body but is it worth changing that if was grinding when I was trying to change the gear? And it does not engage in gear.
Thank you.
P0500 Vehicle Speed sensor code..the sensor is located at the valve body assembly so need to remove it if replace new.and also check the ABS system theres connection for that code.
excellent work, just a quick one, pls which fluid did u use to wash up the valve body. thanks
I use Gasoline to clean every transmission parts including the valve body Sir.
@@ararlakayvlog2684 God Bless u my brother. Thanks a lot
Does the slu solenoid come out after temperature sensor is removed?
Hello sir, can you pleaseeeeeee give me a tip or 2, I ve been trying to fix my 2007 IS250’s A960E gearbox’s P2759 for 3 times already, changed ATF each time, filter changed, SLU Solenoid and wire already replaced, however P2659 still exist. What else can I do? Should I use contact cleaner to clean all the wires, adaptors and solenoids next time before I put new ATF in? Thank you so much!!
2007 lexus es 350 transmission is the same as 2007 toyota avalon or camry?
If No dipstick is same U660 transmission.
Any videos on a Lexus A960E transmission valve body disassembly
Go to my Videos .How to dis assemble valve body .same as A750e transmission brother.
Thank you for your rich explanation, but I want to ask about a problem that occurred with me. I own a 2013 Avalon Model and I have been facing a problem now for two years, which is when I want to start and put the car on D, then it does not respond and delays by five seconds. The codes did not appear for me when checking, but two days ago I was surprised by the appearance of a code P2714 I am in the process of changing the oil regularly and I do not know if the sensor or the solenoid has started to show faults and if it is about to stop. Please reply. Thank you Lakay
P2714 Or Pressure Control Solenoid Stuck off.meaning there is a problem from Solenoid malfunction detect from the ecu. Two possible reason.Internal failure or Solenoid malfunction. Go to the nearest Transmission Specialist for Maintenance.
Hallo. I accidentally broken body valve gasket, now i can't shift to 4th gear. Is that relate? Or i just can remove the gasket?
Its better to remove the gasket then fix again.
@@ararlakayvlog2684 already dit but still can't shift to 4th gear. Got P27137F code. Solenoid SLT problem can cause this?
Greetings young fellow, 2011 Toyota Avalon: installed used transmission and has been driven for additional 174,000 miles (280,025 km) total mileage on this vehicle 439,000 miles (706,502 km) fluid change at intervals of 40,000 miles. Slipping from 1st to 2nd. Scan tool reads: P2714, P0796, P0746 - Pressure Control Solenoid (A, C and mainly D) when resetting Memory Code and Compensation code goes back to somewhat normal shifting but if abruptly accelerating or driving uphill takes place will trigger code again, fluid smells and looks ok and not missing any. Technicians in NYC recommend: Transmission rebuilt or another used one. Thank you for providing your opinion in this case. All the best!
If you cleared or reset in the scan tools and back to normal.try to change the TCM of the transmission.maybe gonna be ok .but if the oil is burn need to rebuild.
Hi again Ar, in New York summer was consistently hot 34⁰ Celsius, I purchased a used TCM will arrive in 2 days, but meanwhile temperatures have gone cooler past few days to 12⁰ and tranny is shifting much better and trouble codes dissa
Have disappeared, does TCM gets affected by hot temperatures or solenoids or the fluid? All the best - God bless!
Appreciate u homie
What was the problem with transmission so you cleaned it?
If some metal steel coming from the torque converter.To make sure all the valve is moving properly .
@@ararlakayvlog2684 thank you Sir. I changed my u660e fluid because it had hard shift from third to fourth gear, when changing fluid noticed metal shavings maybe my problem could be because of valve cover? I still have the problem
أحسنت معرفتا شكرًا لك
Is there a video gearbox Avalon 2007?
ES 350 only .but Avalon snd Lexus Es 350 is the same transmission.check in my Videos
More video idol
Sure Idol ..subscribe lng pra laging update sa mga next vlog ko🙂
Boss ask klng po problem na toyota altis ko pinalitan n mekaniko rebuilding kit pero still hindi mganda shifting mejo maingay pa tranny boss
Dapat palit pati converter.
Boss lakay, paparehas ba amin principles na pag disassembly Ken assembly iti valve body amin nga lugan? Salamat
Wen Boss.ibat ibang itsura lng pero parehas lhat.
Mmmm salamat boss lakay new subscriber nak kenka, hope adu pay nga video tutorials mo. Godbless
انت فنان❤
Please which one is solenoid A, solenoids B and Solenoid D
Good day...sir saan po location nyo...ilang Araw po pagawa Ng valvebody Ng rav4..
Nsa Saudi ako boss hehe
good day po.sir...may video.po kau para.s 4d56 valve body。。tnx po..
Wala pa ako video ng gsnyan Transmission sir.Mitsubishi yta yan.karamihan sa gawa ko Toyota or lexus lng.
Ayosssss
Hehehe.☝️🥰😁💪👊
Where are you from
Philppines🇵🇭
You Malaysian
No..Im a Pilipino.Philippines 🇵🇭
How are you
audi a6 transmission information
I'm sory i have no expirience audi Transmission.
The video is nice but I don't understand what you are saying.
Please can you translate to english