IKEA hack - DIY ethnic accent table using spray paint
HTML-код
- Опубликовано: 16 июл 2020
- ikea side table:
www.ikea.com/au/en/p/hol-side...
paint:
www.homedepot.com/p/Rust-Oleu...
Thump tacks:
www.homedepot.com/p/Everbilt-...
Using a jig saw I am cutting out some of the checks to create 5 big spaces for the brass bells. The cut edges need to be filed to a smooth even finish and cleaned to remove any dust particles.
The next step is painting. Mesh like surfaces like these are very difficult to paint using a brush. So, I will spray paint them instead.
I am going to use this Rustoleum 2x spray paint in espresso. It comes with primer and paint. so there is no need to separately purchase/apply a coat of primer.
If you are using any other paint make sure you apply a coat of primer first.
Spray painting may seem easier than painting with a brush, but doing it the right will require some practice.
Spread a carton box or a waste rag and lay the table over it. This is to protect the floor from paint.
Always work in a well ventilated place and use a proper paint mask or respirator to cover your mouth and nostrils. This is really important as prolonged exposure to the harmful vapors from spray paints can cause serious health issues.
Shake the paint can well before you get started.Hold the can of paint about 8 inches away from the surface to be painted, and move the can back and forth slowly. Apply at least 2 coats for uniform coverage.
A project such as this needs around 1 and a half cans of spray paint. Check whether you have covered all the areas by closely examining all the sides. And allow it to dry.
Once it has dried I am going to nail this gold thumbtack pins on each intersection of the checks. I felt dismantling this table would make my job easier. So I am removing the screws to separate all the panels and then start nailing the thumbtacks. I have nailed them on all sides except the back. It does take some time to finish nailing 4 sides.
Hooks will need to be screwed in the 5 square cut-out areas from which the bells will hang. I need gold colored hooks that I don't have right now. Instead I have decided to use screws and add these connecting chain/rings between the screws and bells.
It's all done now and I am assembling the panels back into a table and hang the bells. - Хобби
I followed your instruction's and made similar Ethnic Accent Table final out put very nice Thanks again
Very beautiful and thank you for sharing your ideas 👍
Simply beautiful. You are so creative!
Thank you
wonderful idea! beautiful ethnic table😍😍
Thank you
So elegant! And inexpensive too. A fun project.
Thank you
Very nice DYI!
So creative 👏👍
Love your videos... especially for the ethnicity and aesthetic values you add. Thanks.
Thank you
Awesome as always @Savi's Creations
Thank you
Beautiful Savi, 💕💕
Thankyou
There is some magic in your hands...
Thank you 😊
Nice👌
Nobody can beat your ideas😍😍 way to go girl.💖 may I know from where you buy your bells?
Bells are from Amazon
I’m a new subscriber to your channel! Absolutely in love with all the makeovers you are doing! What is the name of this IKEA table you used for this hack?
Thank you. It is called HOL storage side table. But very recently I have searched in ikea website and not able to find one🙁
www.ikea.com/au/en/p/hol-side-table-acacia-90353021/
Amazing. I enjoyed watching it and maybe will try your techniques on one of my DIY projects. Where in the US are you?
Thank you. CA
Beautiful creation!
Interested to know where the brown carved wood panel wall decor in the video was purchased from? Or is that a self-creation as well?
Thank you. I bought that from Facebook marketplace
love you wall hangings, where did you get them from?
Your pooja mandir and this creation are amazing!
Thank you. Bought from facebook marketplace for second hand.
Very beautiful. Could you please tell me from where did you get those brass bells?
www.amazon.com/dp/B07ZVTC3LT/ref=cm_sw_r_cp_apa_i_1M3eFbHEMWKK6
is this table from ikea sturdy enough for a average sized adult to sit on it ?
Yes
Hi there. I bought similar table for this purpose like two years back. But some what list in trying to put the bells. My hooks not getting inside the wood. I think u skipped it. I didn’t show how u added the bells. Can u plz help me.
Also is the connecting chain is sturdy to hold the bell.
I have not used hooks to hang bells instead I have used screws
I didn't find any issues
Beautiful. Morre ideas for mandir pls.
Thank you, sure