BMW N54 335i Chinese 17T Hybrid Turbo Install Part 9: First Drive
HTML-код
- Опубликовано: 7 сен 2024
- BMW N54 335i Chinese 17T Hybrid Turbo Install Part 9: First Drive
So first drive, this was nerve racking, knowing that if i have done anything wrong, means hours and hours of work would need to be repeated. We did get to roll the power on and considering its still on the map for the stock turbo, these made a bigger difference than expected.
Want some #teamn54 merch? Teespring Store - bit.ly/3fh0bT5
The car is tuned currently by JSRTuning and its performing so well. Please go and give JSRTuning a sub on youtube. Its mainly n54 racing vids.... i mean what more could you ask for. bit.ly/3dCM60F
Check out the full playlist on this car - bit.ly/2xc0EoA
Budget Build Parts List So Far
Turbos through eBay
RHD UK/Australia - ebay.to/2PKAgId
LHD USA/Europe - ebay.to/3hN9awQ
Turbos through Amazon
17T RHD / LHD Listing amzn.to/3efnoDQ
19T LHD amzn.to/2VZuV3i. (these are slightly bigger then mine, i wish i got these)
19T RHD amzn.to/2ZXg0Ib (these are slightly bigger then mine, i wish i got these)
2 Inch Inlets - ebay.to/33Qi9ZJ
Gecko Coilovers - ebay.to/3jrUIeI
Rocker Cover - amzn.to/33caOBd , ebay.to/2TIRQyZ
-10an Line & Fittings Kit - ebay.to/31GFsCB
Trans Cooler - ebay.to/3gOkbxy
Elder Coils - ebay.to/38Izq5R
Billet PCV Valve - ebay.to/3aS7NJg
China Spec Walbro 460 F90000267 (use at own risk, but that is whats in this car currently - update the second pump in the stage 3 setup, failed straight away) - amzn.to/33fqYZ4
LCI Tail Lights - ebay.to/34KQc3L
12mm Bolt On Spacers - ebay.to/2XRRKah
E92 Custom Floor Mats - ebay.to/2CkgEaX
Smoked Side Flashers - ebay.to/2XPyVEk
Clear Side Flashes - ebay.to/2PMkMUi
My port injection was secondhand. But i may switch to a PI manifold shortly.
#17Thybrids #teamN54 #n54turbo
Follow us for more BTS stuff and more car content
On Instagram: / zeroto60tube
On Facebook: / zeroto60tube
Business Enquiries: zeroto60tube@gmail.com
These n54 335i videos are still great in 2023👍🔥🔥🔥
You guys just made me buy:
-VSRF ceramic coated down pipes
-cone intakes
-Turbosmart Raceport Blow Off Valve for BMW N54
Not turbo's, but on my way to be FBO
This is the effect you have on people! Thanks so much for the content, guys!
Watching this video, I was smiling all the way through! Still am
Its incredible what a difference it makes. Mhd stage2+ is a blast with inlet fbo is fun af. I'm a little nervous to run e85.
Wicked! To hear, those mods completely transform the N54 and for such little money its crazy value. Have you got it installed yet?
@@ZeroTo60Tube Hi, no I just ordered the parts yesterday, so will take a while to come in, install, etc..
Awesome awesome! Been on the edge of my seat for this one! 🤙🏽👍🏽🤘🏽
Thanks for following along man. We were both nervous on this one.
Amazing!!! I'm definitely going the Chinese turbo route once my original turbos give out! Thanks for all the content, everything you've documented will definitely help out alot of people!
I hope so, i was quite nervous about them. Im running them as supplied so let's see how they run and last.
@@ZeroTo60Tube Did you check out the wastegates with a vacuum pump?
Just saw the 335i on the motorway,, zero plumes of smoke. That’s a win for sure guys!
Looking forward to watching the vid later 🤘
Just been doing some logs on the JSR map.... she's feeling a little wild.
Great work on this guys! Literally couldn't have happened at a better time, just fitted intakes, oil pan gasket and loads of cooling parts to my n54 this weekend and used your videos to help me! Thankyou, some great reactions on the pulls!
Im glad they were of some help. Also thanks for checking out the vids and commenting, really appreciate all the support we get.
Watching Dave crapping himself, tells you how much of an animal the car has become! 😂
Can't wait to see what a custom tune does to this beast 👌
That was great seeing you smirking with excitement! This is making me want to upgrade. You may have to upgrade your drive shafts soon. A friend broke his on stage 2+ without Inlets. I run stage 2+ with dp’s, inlets, intercooler and DCI’s and love ever drive. No E85.. yet. Loving this series. Great video!
Wow, did he break them doing a clutch drop launch?
Zero To 60 - just on one side. At the cv joint area near the diff. I think you can get aftermarket/ thicker shafts on sites like ECS tuning. Apparently M3 shafts need fabrication. But they are much beefier. Made a very loud break. Maybe just push them until one breaks :-)
Expect a lot of wheel spin, I have a 6 speed manual with these turbo and running 275s and no traction in 1st 2nd and 3rd
Hellllll YESSS!!! What is the rest of your setup?
@@ZeroTo60Tube just a stepped intercooler, down pipes, charge pipe, pods and an American 335is/550 clutch. Having difficulty keeping silicon houses from piping off at the moment. The thing's a monster now, I was shaking after the first drive.... and still now after a month
I'd love to see an LSD upgrade
@@TippsyMcstagger85 What tire are you running though? 275's mean nothing if its a shitty compound
@@TippsyMcstagger85 What time do you have with those turbos, and are they the same as the ones in the video?
was smiling just as much as you guys!
JSR Tuning is great. I ran an 11.6 in the quarter with his tune and stock turbos. Also check out the federal 595 rs-rr tires, they grip a lot better than the Michelin’s
It’s the inlets. The best mod I have done to my N54. With the sucking in air sound is amazing. It even made the blow off valve sound different. But dang. I’m liking the sound. I’m very impressed with those turbos. Thanks for the sharing
We'll see how they go once they are properly setup. But initially impressions are high. Then again anything without wastage rattle was going to be an improvement.
After changing my plugs a couple of years ago, I removed the cabin air intake cowling and found the intake/turbo spool was sooo much louder and since then I never reinstalled it. give that a go to, if you don't mind a little bit of engine bay smells.
Don’t usually comment, however, I just wanted to say thanks for these videos! Great build and inspiration for my 335i!
Thanks so much for watching them and the comment too man. It all helps motivate us to keep doing them. If you have questions about take some steps in to modding let us know. Between this one and the MHD cars we play with on the channel we have a bit of experience with what works and what doesn and what is also worth the money.
Zero To 60 I will, thank you! It’s great to see another RHD car getting worked on. Being from the U.K., I haven’t seen many builds like this on RUclips 👍.
Nice one boys, so glad the smoke haze cleared and boost clarity was achieved!
Awesome to see it all coming together. I’ve found with my setup (same as yours except e85) that MHD was a lot more forgiving and awesome power.
To be fair e85 made a massive difference to mine before the turbos. It was always a bit meh on pump fuel.
Absolutely loved this! When you went into map 6 I giggled out loud!
So pleased it's all working nicely. Bring on the tuning 😁
It just didnt feel right in map 2. But looking back at the logs, i am fairly confident the JB4 was just re-learning wastegate adaptations. I had reset everything in the JB4 that related to wastegate control, so i guess it took a few pulls to sort itself back out. By the end of the video she was feeling amazing.
Awesome job guys, I’m debating upgrading my turbos on my 535xi, you guys have that thing running great.
Just getting started on the turbo setup. Can't wait to see what it does at 25psi plus.
Now im going to save up for the 19t turbos. ive watched your whole build series. When i get all the parts, im going to post videos as well. Im excited!
Hell yeah!!! Drive safe once you get it up and running. They totally change the car.
Don't get 19t! 17t much more reliable
@@smoothlife6419 same company bro
@@s55matt88 yeah I know bro but trust me they haven't gotten these right. I don't want to see you waste your money. Go 17t. You still get tons of power from those
Finally! I have been waiting for this one 🤩
I have the exact same setup and have to agree about the sound from the engine/exhaust!
I also had alot of smoke and smell from the startup, but it eventually stopped.
Can't wait to get custom tune and hit boost 🔥
Thanks for these great RHD ebay turbo videos! You really keep me motivated through my build!
Keep posting 🤩👌🏾
will be a lot better after a custom map.i can see its pulling a shit load of timing out mid range and higher up, thats why your boost its jumping around irratically. thats also why its rich as hell,...like 10's and 11's in some places. the ecu is freaking out and dumping a shit laod of fuel in to try and save your engine. i wouldnt give it any more runs till you get a map flashed dude
It sounds a little less raspy on the exhaust. I wanna hear some out of car flybys from these turbos. Great vid!
We will get some decent sound clips once its running properly. Need to work out the best way to capture the sound. It sounds so bloody good.
Next step is to upgrade to the m3 differential and cv axles to plant that power to the ground... love it!!
Since this vid, i have now fitted coil overs and holy wow its made a massive difference. Need to get the LSD sorted still. Looking forward to seeing what the setup is really capable of.
Good job man loved seeing the whole install process and hope no major issues arise. My guess would be a custom tune should help with that lag and help finalize and sort everything out for that nice finishing touch
Anything tuned for stock turbos won’t hold boost up top. Get a couple new revisions from rfp and dial in the jb4 settings. You’ll be setup. Love the series. Best N54 content on RUclips. Edit. Saw end of vid. Jsr is good too. Look forward to it.
Thanks for tips and following along. It's been a bloody awesome build. I'm going to try and convince the MHD only car thats on the channel a fair bit to do the same turbos. So i'm thinking it would be really interesting to compare a JB4 car and MHD only car with these cheap turbos.
Zero To 60 should have him get the new 19t version. I have a set going on mine shortly.
Super happy for you guys! Loved watching this progress over the last week. And now your making boosties!!
Thanks for following along with us. The support and comments from everyone has been amazing.
@@ZeroTo60Tube hey brother how are u im looking on all your videos on you tube u guys are so cool and interesting i would love to ask if I upgrade my turbos to 17 do u recommend to change also my water pump with thermostat and cuz basically i really dont know how my waterpump condition and if h recommended the electric water pump also thx u a lot
Keep up the great videos !! I own an e92 335is dct. Big fan .
I really wish we got the 335is down here in Aus. Glad you like the videos, thanks for checking them out, we appreciate the support.
Good to see it all went well and is making some good jam guys 😊 very impressive stuff...
All about that jam!! Im just glad nothing leaks... Was genuine worried.
@@ZeroTo60Tube oh yeah man that's always something in the back of your mind glad it all works tho and best of all no leaks 😊🤘
As always one upgrade leads to another, power upgrade -> Brakes -> Grip -> Coil overs -> Rolls Cage -> power ....and on it goes where it stops no one knows.
I can't think of a better way to spend my money :P
Getting my hybrid turbos next month cant wait
hell yeah!!! got your fueling system worked out?
@@ZeroTo60Tube yes they are working on it, fuelpump upgrade and better injectors.
Air intake from the nose. Not open airfilters
Oilcooler upgrade
Intercooler upgrade
Downpipe catless milltek exhaust system.
xHP1 gearbox done
Stage 2 or maybe stage 3 we expecting 450/550 hp its enough for me dont need to blew the engine up :(
End of August should be finished. Than i will start posting videos about it
You guys made the power that i expecting 😏
Really happy for you guys ! 👍
Sound like a beast. Congrats guys👍👍👍
Thanks and also thanks for following along! Appreciate the views and the comments. It makes want to keep doing more the cars for sure.
Well worth the hassle guys, well worth!! Keep it up!
Thanks a ton!
Now you need some coilovers and m3 control arms for some canyon runs😈
You boys need a diff big time! I know she is currently down but food for thought.
I was litterally testing the diff, when she lost compression. ruclips.net/video/eapka5Gvc6o/видео.html
Zero To 60 no fuckin joke since writing that comment like 5 hours ago my wastegates have started rattling on my 335i 🤦♂️ ffs
Insane!!!!!!! Enjoyed watching you guys.....
Do the logs ,i had the same thing happen to me as you could imagine and i looked at the logs and thats what i had ,timing corrections on same cylinder 4 throttle closures up to 84%and hpfp dip to 60psi just like you felt in the video and didn’t know what that cut out was ,that’s what it looks like in the logs
Hi
I also drive a Bmw 335i N54 lhd. German vehicle.
I've seen the video of them with 17t 6 + 6 td04.
How satisfied were you with this turbocharger?
How many miles did you go?
How much power did you drive?
Best regards
Many Thanks
10:25 Speedometer vanishes hahahah-
The younger brother sounds like Borat 👍😃
That movie was a tough time in his life, please don't mention it................. "very nice how much"
Jon is gonna make it an animal
That’s what I want to hear!!!! 😁
@@ZeroTo60Tube I've had a couple revisions from him today he's definitely an awesome tuner!
@@nswiss19751 how good is that, im pretty sure he is even on Holiday at the moment.
Makes me really excited to be getting my 17T's! Mine are on order and then the work begins LOL. Sigh... Actually I do enjoy it a lot. Until the bold breaks off inside the block or frame and YEE HAA! LOL.
Get in contact with sutphin for a transmission tune and jsr for a custom jb4 tune. It’s very helpful and they’re both are very good at what they do. Greetings from Puerto Rico 🇵🇷💪🇦🇺
Thanks man, and thanks for following along. Do you guys get much of a BMW scene in Puerto Rico?
Not too much, it’s much more like old corollas, a loooot of rotaries and a bunch of hondas.
@@Rotorcycle i remember seeing a youtube vid on the corolla hype. Pretty crazy how fast some of them are. I do dig rotaries and hondas are gowing on me, but well done for going against the local grain and playing with the BMWs.
Rotaries are #1 though, BMWs are kinda alright. This one on my profile picture has a single turbo setup, it’s pretty quick but nothing compares to a lightweight seasoned rx7 lol
Since this is somewhat of a budget build you should look into RacingDiffs lsd conversion for stock diff!
I have done some reading on those. I am a little worried about getting my gears ground down to fit that assembly in.
Good work boys, you've done a great job! You should ditch the piggyback and run a custom MHD map.
Its running a custom MHD map. JB4 just controls boost and the port injection.
@@ZeroTo60Tube Sorry, my bad! Can't wait to see more of this car.
Nice work guys. It sounds different to stock turbos defenlly sounds nicer with upgraded chiness turbos. Shit thats noticeable difference with just turbos no software. I reckon atleast over 50hp without a software flash. Have you discovered on XHP flashtool with custom settings theres a new setting active line pump pressure its a great setting for high torque out puts for ur transmission it increases line pressure which is great for no slipping ur clutches on trans. I highly recommend adding this setting it will help alot with ur high performance e92 335i bmw.
Hey There, this car is running XHP v3 Stage 3. However i haven't had the time to properly sit down and work out any custom XHP settings. It's something i really want to do. With the active line pump pressure, are you running much more than the stage 3 default map settings?
@@ZeroTo60Tube yes i am running stage3 3.0v i ajusted rpms in d s m modes. Activated launch control. I ajusted shift mapping as well for D and s mode. D i decreased 10%. S mode 40% increase. I ajusted torque reductions to for d m s to. I activated high line pressure pump as well. Seems to run perfectly for now. I do 2nd gear launches without brake spinning tyres on colder nights and shit surfaces of road. Can't wait to see you guys with full tune on with turbos its a animal lol
Cool video guys.
I've boost limited 1 and 2 via mhd so i dont smash the rev limiter and it freaks out like your video.
Id love to know if people are doing it the other way around and using xHP torque per ger in 1 and 2 maybe 3 for you guys now 👍
I just dont know if xHP will limit torque using the throttle? (I dont imagine that will work well)
I estimate from logs torque in 1st should be around 350, 2nd around 450 which is lower than xHP suggests. Thoughts anyone?
Man happy I'm not gonna mode my 335i to the point where I'm scared to drive it to the gas station
Does it still have the standard diverter valves. If so bin them for a decent bov. That might be the cause of bleeding boost.
Loved the VIDEO!!!🏁💯💯💯🔥
Thanks man!!! Good to see you're still cracking on with your vids!
Wow well worth the wait😆
Shit...that highway pull must have been close to 190! Bonkers quick
How many miles did you get out of these turbos? Are they still running? Thinking about getting a set.
The driver looks, sounds, and acts exactly like a typical 335i driver. These guys are the best prey I go after with my MKIV Supra, because their reactions after I destroy them on the street is priceless. Lol!
lol.....
I think you guys should definitely consider LSD next, it will be like a day and night difference
Watch the video man
07 335i jb4 with hybrid turbos,fbt,bov hks what map kind use
Nice buy him some nappies for tomorrow's ride!
Deal!
Congratulations
When yall bounced off the rev your traction control kicked in and cut power.
I would expect a similar thing. However traction control was very off. It wouldn't have spun the wheels like that at all if it was on.
I keep on smiling love it🤣🤣🤣
Thanks for following and commenting along. Glad you're enjoying it.
All done on a private road of course
Smoke and mirrors... honest.
Zero To 60 mostly smoke by the looks. First off the turbines and then the tyres. I noticed you kept the OEM wastegate actuators. Any reason you didn’t use a stronger spring to keep boost at higher rpm? Does it have better diverter valves?
Somewhere in Mexico 😜
Congrats!
Thanks for following along!! It's been a fun/stressful build. Dave said he's been talking with you about his M5.... Looking forward to going through the same process with that car soon.
I've been searching for info on whether i should reset my adaptations on my car after doing the 17T turbos but I don't see any info on this? I know a custom tune is needed but I've only just begun to get things sorted and am wondering about this.
I would reset adaptations and let the car do some relearning. It seems to be more benificial on JB4 cars. But if the hardware is fine, it may help.
Good stuff guys, keep up with the video. I just picked me up one of these e93. What do you guys think it run at the 1/4 miles ?
A stock one in the 1/4 will probably be mid to high 13s. But a few basic mods and cheap flash will get you in to the 12s.
Off the shelf maps don't really work for upgraded turbos. Gonna feel much better with a tune
Couldn't agree more. This is a custom e85 tune for my car with the stockies, so hopefully the fuelling is pretty close anyway at these lower boost levels. But looking forward to getting things like vanos dialed to get these things spooling faster.
I’m doing this exact same setup but with the bov system instead of the recirculated valves they leak loads of boost under extra power load.
How was it taking out the turbos did you enjoy taking the subframe of the motor haha
I definitely saw 19psi
Thats my tuner as well
What setup have you got on your car?
time for an LSD 😁
Like yesterday hahahaha!!
Its just comin ounnn
very very nice
love the videos guys ;-) .. Question: how did you setup your map 6 , any guide to it somewhere?
Map 6 is purely for custom boost levels. So mine is based on what the custom back end flash said. It can be a matter of setting boost targets and duty cycle to get everything to work well. The place for info is N54tech. If you have a JB4 and can post up a log in the support forum, the guys will guide you through the process.
@@ZeroTo60Tube yeah thats what I thought , Im hitting boost target in map7 on the Race BEF and everything looks ok, just the trims are going south from spraying ethanol & water in the chargepipe :) thx anyway
Do you still have this turbos on the 335i? Have you had any issues?
Yes, did a proper update a few months ago ruclips.net/video/MoUuuOAJ6Yk/видео.html&t
Hey how do you prime the turbos exactly ? Like step by step? I’m already done with my turbo job but now all I need is to add oil and coolant and before I start it I want to make sure I prime the turbos Right , thanks in advance !
just crank the engine with no injectors for 5-10 seconds. on this sort of turbo tho, its not the end of the world. Once the engine is running the turbos will have oil pressure with in a second. So they dont really have time to get hot or damaged before the oil gets to them
what spark plugs are you running ???
oem plugs, 1 step colder, 2 step colder ??
The care now runs 2 step colder NGK plugs, gapped to 0.018"
did you guys do any work to the turbo like re balance the turbo or just just install the turbo after you got them?
I didn't, i specifically wanted to see how they would last as supplied from china.
Tire and alignment time👍🏻 what mix are you running of e85? E50, 60 or?
Full e85 at the moment. The car is running port injection a brand new HPFP and twin walbro 460s. So fuelling should be pretty good.
Hey man great content 🙏🏻🙏🏻 at what rpm would you say they spool these 17tees?? Greetings N54 love
In 3rd you have to limit boost. They are laggy at all.
@@ZeroTo60Tube are laggy or aren’t?
Did you upgrade the injectors when installing the new turbos
The car has index 12 injectors, brand new high pressure fuel pump, twin walbro 460s in the tank and BMS port injection with 500cc injectors.
Is there a difference between the 17t and 19t sound wise?? Can you hear more turbo sounds from the front and out of exhaust from the 19ts since they are bigger? Thinking of getting the 17ts I’m sure they sound just as good
Not really, the sound difference comes from what inlets you have, what filters you have.
@@ZeroTo60Tube ok nice! I really like the turbo sounds , it’s music to my ears! I’m going with 17ts with relocated inlets.
Subbed! lol is this thing running that hard without an lsd? i didn't see it in the list in the description.
Thanks for checking us out man. Yes no LSD at this point. I've tried to film most of the progress to this point. Definitely needs and LSD and coil overs asap.
@@ZeroTo60Tube Ah ok. Yeah I was interested in these turbos as its time to swap mine soon and ran across the channel. Have you guys got it to a dyno yet? because i was wondering what are some of the expected hp gains you can expect from these?
@@anthonywright5275 Havent been on a dyno yet, but the car has done a 6.43 100-200kmh on a dragy. So it really should be up close to 700hp at the crank. Thats the same 100-200 time as an Aventador. This car is absolutely wild now.
oh and its not on its final tune yet
@@ZeroTo60Tube Jesus Christ, Ima believer! Lol I'll go ahead and take the chance on em next month. Thanks!
Was the first run without a tune? Just JB4 and that's it???
no no, it was a custom tune for stock turbos. Just not a hybrid turbo tune.
@@ZeroTo60Tube Do you know if its safe to run an OTC map on the hybrids? I just picked up a set, just not quite ready for a custom tune. Want to upgrade my fuel pump before I target higher boost.
God I wish fuel was that cheap here in nz. Down the road from me its $1.66 for 91. We dont have E fuel stations in NZ
We've been spoilt since the oil price dropped. Mind you E85 is still $1.79.
@@ZeroTo60Tube Druing the rona lockdown here fuel got to as low as $1.44 for 91 so that was cool but couldnt drive so immediatly after level 3 it went up 10c lol
Typical....
@@ZeroTo60Tube Either of those prices are amazing, here in Auckland with the 10c fuel tax we're at $1.95 =/
Dyno it!
If you break them because you not tuned properly don’t blame it on the turbos ,you are making a big mistake running them without proper tune,you pulled so much timing on that pull ,that you had a throttle closure and i bet you hpfp went to like 60psi ,you need a bov to let the air out so so it doesn’t smack against the turbos and ruin them !!!!
You might need to elaborate a little here please? Where are you seeing the timing pulls and throttle closures? I haven't loaded the car up to do a proper 3rd gear full load pull for a log yet, so curious what you are seeing that is of a concern? Dont forget the car is JB4 running boost control and port injection, with a custom full e85 tune for 20psi on the stock turbos. Boost limit was set at 22psi for this drive.
What OBD scan tool/interface are you using?
Thats the JB4 ios bluetooth app. So its connecting to the JB4 in the car.
what tires are you runing?
PS4s back then
Does it have enough power for a safe overtake?
I think in the dry, yes should be safe...... in the wet, ummmm maybe just wait for a dual carriageway 😂
Please do pulls with a mic in the bay so we can hear more ssstuttutututru wwwwhhhhuussshh.... so happy to see you guys almost shitting yourself’s lol. Great job all around you guys. Really keep me interested every step of the way and I don’t even have a N54 to play with myself. Can’t say it enough great job. Looking forward to other projects and more up grades to this bad ass car! 🤘🏽🔥👍🏽🚗💨
Dude, that you for following along. We are already talking about ways to capture the sound this car makes. To be honest it always sounded a bit flat before, but that has changed.
Zero To 60 thank you for making such great content that isn’t so stale... 😝 keep killing it!🤘🏽 ppssshh hoping 🤞🏽for that single spoolyboy is coming soon, wanna talk bout extra cool noises... you guys should look into maxpeedingrods.com not sure if they make a kit for the n54 but they do offer tons of turbos, turbo kits, pistons, rods, coil overs, all types of stuff at great coast. I also don’t see why they wouldn’t work with you guys cause you make such awesome videos and great step by step with out putting people to sleep. lol. But still can’t wait to actually get to hear what you guys got to experience firsthand. 🤘🏽🤙🏽🔥💪🏽🚗💨💯🙏🏽
How many HP does it get without a tune map?
On stock map, a turbo change wouldn't net much a difference.
are 19ts better or 17ts ? which is better
I have only driven 2 19t cars. TBH my 17t car was quicker however a lot goes in to setup. 17T vs 19T makes very little difference with the china turbos
@@ZeroTo60Tube my turbos jus blown today , i think im gonna go with the 17ts!
@@ZeroTo60Tube i went 17ts and i love em!
@@travies1527 how’s the reliability on those turbos ? What tune are you running?
How long have the turbos lasted?
I have been super lucky. They are still going, however it seems the china manufacturers change what goes in them. Check out turbo labs America. Best info on the insides of these things. Its genuinely luck of the draw with the Chinese stuff at this point.
Do you have to tune with these turbos is it really really needed
Yes. It is really needed. They will work without a tune but you’ll be missing out.
@@ZeroTo60Tube thanks I’m looking into tunes now
Use Map 5 auto tune
Auto tune or map 5 is really set up for the BMS back end flashes. This car has a custom full e85 flash and port injection. So i'm not sure how that autotune feature will really go down.
what's your exhaust setup?
VRSF downpipes in to a Miltek cat back system. Its too quiet...
Get a custom tune
Next project, 6mt swap
ohhhhhh i really wanna get the auto tuned a bit better first. Dont tell anyone, but i want to send it down a proper drag strip and see what the stock auto will do with this setup.
@@ZeroTo60Tube DCT swap it its way better.
@@jakegoldberg8941 huge fan of the DCT, i would do that before a manual in this car.
Zero To 60 if you want to do it let me know. One of the only people in the US who has swapped one.
I suppose you knuckles need a break anyways! But just ask Vehicular DIY himself! 6mt swap, best decision he's ever made!
Loud pops........smell oil...........lets do nothing and keep driving LOOOOOOL!!!
Load pops and smelling oil is all part of driving an N54............
@@ZeroTo60Tube Right...Thanks. Feeling even happier about my N55 now ;)