Re-Purpose Old Car Audio
HTML-код
- Опубликовано: 11 сен 2024
- Planning to make use of some car audio I pulled out of a 1998 CRV for a shop system. powered by two HP DPS 1200 FB A1 power supplies on separate circuits. Unfortunately the base doesn't come thru on the Samsung phone. It does hit hard to the point of feeling it.
JVC KD G820 head unit. JVC CH-X1500 CD changer. Four Pioneer 6x9 5-way 100 watt rms speakers. MTX Thunder 4500 10" sub, 225 watt rms.
Thanks for the video. Somewhere I read that you have to be very careful when drilling through the PCB because there are internal traces running in a middle layer between the large gold-plates pads. Did you take any particular precautions to prevent the drill from cutting through those? Obviously your unit worked afterward.
Dude, that Rockford 800x4 is a bloody nice amp if you can keep it cool, and the Alpine M65 is one of my most favorite amps I've ever owned, its absolutely tiny and never gets hot and it has *tons* of balls. I *really* dig those copper terminals you have used for the output on the PSUs, I really want to find some! Nice setup!
At 110 VAC the max output of these power supplies is 75 amps. If planning a system, add the amperage of the fuses in your amplifiers and multiply by 10. If you're at or below about 600 you should be good with one of these power supplies.
Cool here I am thinking I was the only one!!!!
📢💪📢💪
thanks
Excellent video. Keep it up. By the way is there a link where i can get those copper lugs? and what kind of drill bit you use to drill through the pad (I'm afraid of cracking it). thanks
The lugs are from Home Depot. I bought the 8 gauge version. I used a standard Dewalt bit with a point on the tip to keep it from wandering. Size was to match the thread diameter of the machine screw. Washer and nut to fit the machine screw.
Great video! Where did you get those lugs from? The ones on the psu board. Thanks
The Home Depot.
what are those copper Terminals on the power supply called I would like to find some thanks
Lugs. Home Depot near electrical connectors.
Where do you find the terminal for the power and ground?
I got those lugs at home depot.
Hey if you could let me know how to correctly drill a hole through the positive and negative that would be great thanks
Use a bit that is the same or slightly larger diameter than the screw you intend to use. I used a hand drill and a bit with the point on the tip that keeps the bit from wandering. Use machine screws with a head larger than the hole in the lug. You'll want a nut and washer on the ottom side.
does the fan on that power supply is not running on ide?
It runs quietly all the time. Idles at low or no depend.
@@davidburns4176 ok thanks for answer
I can confirm, I have the 1400w platinum rated version and I modified it to output 14v and I draw 100A off it (its rated 12v 120A) and the fan is always almost silent which is amazing because its tiny maybe 40mm and you would think it would scream it's head off but it doesn't.
Are the power supply’s loud ?
When the radio is off I can barely here them.
Hey David
İ have an server hp powersupply but i can not turn it on
What should i do
Because i want to make same set up for my own shop .
Thanks for answer
Which model power supply do you have?
@@davidburns4176 the model is atsn 7001044
@@davidburns4176 when ı plug the powersupply in i dont get any green lamp or fans doesn’t work
On that model solder a jumper wire or a switch if you prefer between the second small pin from the left to the pin beneath it on the bottom of the rail.
@@davidburns4176 do you have maybe instagram adres there i can also send some fotos and like that it can be more understandable for me
Dear Sir,
Thank you very much for your video. Pls help me: How to eliminate "Turn On & Turn Off" Pop sound in your car amp.? Thanks
You may have your amp gains set too high. Make sure you are running a wire from the power antenna/remote turn on from your head unit (usually blue or blue and white) to the remote terminal on the amp.
@@davidburns4176 Thank you Sir. It means that no need this item "
Car Audio Stereo Amp Audio Stereo Turn On & Turn Off Pop Eliminator Stopper"?
People still use headunits and CD changers these days? LOL
Well, not using it in the car anymore.
@@davidburns4176 Not sure what politics has to do with it (none) but here is a true story, I still got a spindle of CDs and DVDs from Circuit City when they were in business. I know I havent bought a CD in well over 15 yrs. I couldnt even tell you where to but one from these days.