Great vidieo, I'm done structre. And still trying dome design , but at 6:40, it doesn't work well in small, medium, and large patterns. Can you share the dome design 3ds file?
Hi, I’m having a hard time connect the clscrv Curve command along with the flip curve command to the offset curve command, it only lets me do one or the other but not both at 4:58, can you help?
Hi, thanks for sharing, it's very clear and concise. As a GH beginner, I got stuck in a certain step. May I make a request? I think I may have made a mistake in the step around 6:40 in the video. I can only use the "item" button to select part of the face. Is it true that I only need to select a small face in this step? I would appreciate it if you could spare some time to help me.
@@computate.d9140 I used list item command and changed the index to 1 but still its not working and it is selecting one part of the surface not even the pattern
@@Mohd_z9 One surface should be the correct surface. Try to find the correct index number by area. Biggest area's index should be the index for the surface you are looking for.
@@computate.d9140 I had the same problem. In , because surface is "trimmed surface", it is split from an existing sphere other than a dome, so there is no such object in . So I recreated the dome ("untrimmed surface") with . I'd appreciate it if you could give me an answer.
@@computate.d9140 I also had the same problem. I've tried all the comments above, but I don't know how to set detailed settings, so I'm leaving a comment like this. If someone could tell me the exact solution it would be of great help to me to recreate it. May I make a request?
Hey, thanks for the informative video. I have one question, though. At 4:44 you use a close curve component before offsetting the pattern. Yet for some reason I can't find a close curve component in grasshopper (I'm wondering if the component has been removed from the program). Do you know how can i find the component or can maybe give a potential workaround without using ClsCrv?
at 4.58 the curve maybe offseted in the opposite direction ( it did for me it looked like the curve ponent offset at both sides for no reason) of you face that issue just add the negative copoment
Hello, I have a problem from around 6:40 onwards. Once I add the list item it no longer seems to work. I've read some of the comments below but no one has given an actual solution.
i have emailed you about this but after you added the list item which connects to the large pattern, medium etc it stops working for me. Any solutions yet?
never thought to create my own patterns like that. That was really cool thanks!
Thanks ! Always good to keep learning 🙏
THE BEST TUTORIAL I HAVE EVER SEEN.THANK VERY MUCH FOR SUCH GOOD TUTORIAL.
Excuse me, I want to know how you learn gh, have you read any books or tutorials, can you recommend them if you can?
I like the way you do this，it's very efficient.
@@yilongguo1021 Just a lot of practice and youtube tutorials! AAD by Arturo Tedeschi a great start if you want to learn from a book. Good luck!
@@computate.d9140 Thanks a lot！
Great vidieo, I'm done structre. And still trying dome design , but at 6:40, it doesn't work well in small, medium, and large patterns. Can you share the dome design 3ds file?
this was quiet innovative and informative
Wowwieee I’ve been wanting to learn this for a long time
Hi, I’m having a hard time connect the clscrv Curve command along with the flip curve command to the offset curve command, it only lets me do one or the other but not both at 4:58, can you help?
Hi, thanks for sharing, it's very clear and concise.
As a GH beginner, I got stuck in a certain step. May I make a request? I think I may have made a mistake in the step around 6:40 in the video. I can only use the "item" button to select part of the face. Is it true that I only need to select a small face in this step?
I would appreciate it if you could spare some time to help me.
Hi , please send me your script. computate.design@gmail.com
loved the content of this video
at 6:38 you add an item list but you didnt show it, should I set it to certain number or just keep it like it is?
I forgot to show the number. With this node I select the correct split surface. The index number I used is 1
@@computate.d9140 I used list item command and changed the index to 1 but still its not working and it is selecting one part of the surface not even the pattern
@@Mohd_z9 One surface should be the correct surface. Try to find the correct index number by area. Biggest area's index should be the index for the surface you are looking for.
@@computate.d9140 I had the same problem.
In , because surface is "trimmed surface", it is split from an existing sphere other than a dome, so there is no such object in . So I recreated the dome ("untrimmed surface") with .
I'd appreciate it if you could give me an answer.
@@computate.d9140
I also had the same problem. I've tried all the comments above, but I don't know how to set detailed settings, so I'm leaving a comment like this. If someone could tell me the exact solution it would be of great help to me to recreate it. May I make a request?
Hey, thanks for the informative video. I have one question, though. At 4:44 you use a close curve component before offsetting the pattern. Yet for some reason I can't find a close curve component in grasshopper (I'm wondering if the component has been removed from the program). Do you know how can i find the component or can maybe give a potential workaround without using ClsCrv?
Hi Vassil, the close curve component is part of the Pufferfish plugin. You have to install that first. www.food4rhino.com/en/app/pufferfish
Many thanks! :)
at 4.58 the curve maybe offseted in the opposite direction ( it did for me it looked like the curve ponent offset at both sides for no reason) of you face that issue just add the negative copoment
and you don't to do -x on the second offset im not sure why my rhino is diffrent with its normals
the pattern is the last item on the list for me at 7:19 if you're also finding issues with that it's this
Hello,
I have a problem from around 6:40 onwards. Once I add the list item it no longer seems to work. I've read some of the comments below but no one has given an actual solution.
i have emailed you about this but after you added the list item which connects to the large pattern, medium etc it stops working for me. Any solutions yet?
7:18 how you connect item with large pattern and others
thanks for the fasinating video but I‘m confused about1:42 how to make the sphere into the dome surface， could you tell me that demand code？
have you found a way out of this situation?
i sent you an e-mail please could you help me solving the issue in my script?