The LAZY MAN'S Way To Heavy Haul!
HTML-код
- Опубликовано: 5 май 2024
- On this episode you will see how a lazy man moves his loads around Florida!
Thanks for riding along!
Like and Subscribe!!!!!
Subscribe @Diesellifeclothing
Subscribe @OFFFishing
Visit our website today diesellife.com
#video #vlog #viral #trending #trucking #work #construction #power #diesellife #automobile #peterbilt 
Авто/Мото
You are one of the hardest working truckers I have seen on here. As long as it holds the load in place, there is nothing wrong with the way you tie it down. Don't worry about the haters. They are just showing their ignorance and jealousy.
Howdy Chris, When you were talking about tying down that Deere loader I noticed that there is a stamp on the counter weight at the back of the machine that instructs to use that point. As far as using the pivot latch, and for the small distances you travel, I would imagine that you would be safe. But, something to consider is that an ounce of prevention is worth a pound of cure. Ultimately your decision as you are the driver and sole person in charge. Stay safe!
Hahahahhaha love the Elevator music
Hardest working man on RUclips. Keep the content comin!
Mate in one ear and out the other. You keep on rocking just as your are and bollock's too the keyboard warrior's.
Gotta get fonz to run the one stack Mack, seems like he really enjoys that kind of work
Well they must be upset they can’t pull with a beautiful Pete, everyone is different as long as you are comfortable with it is all it matters 👊🇺🇸🇺🇸
The DRIVER rules. End of story.
I’m sure the way you’ve been chaining down is more than enough, at the end of the day as long as you’re confident with your securement & DOT doesn’t have any issues with it then just send it! No need to change it up. Like you said, If you’re going across state lines then maybe I can see the need for more chains, but for the most part you’re local, I can tell you the lowboy guys I used to work with do it pretty much identical to how you do it, and there has never been an issue 🤷🏻 Keep doing what you’re doing Chris! As always stay safe brother 🤙🏼
Good Job 💪
Where I’m at, technically, if you don’t use the frame lock,you are supposed to have 4 points on both the front half of the loader and same for the back half of the loader, as well as the bucket chained down, but when I did heavy haul, I pretty much did it the way you do, don’t let the haters bug you, just not worth it
Hello Chris , love your videos bud. I wanted to say I never set the trailer brakes when detaching the neck unless I’m dropping the trailer completely. Maybe give it a try. I see you always forget to push the brake knob when you’re detaching. Just wanted to share my technique. Have a great day sir.
Hey Chris …. Rob from Toronto …. That car wash has 1300 reviews and they are basically All 5 star. Apart from the music there is also a pretty cool light show. Not sure how close you are to this location, but perhaps take the “burb” through.
The Red bar keeps the machine from swaying back and forth going down the road keep it from turning but if you're only going 10 minutes down the road I wouldn't worry about it
Have a great day. I am with you about caining down.
I've said it before on other channels I watch and I'll say it here
It's your truck your trailer you pay the truck payment and the insurance along with that trailer it's your heavy haul business you don't need to be schooled or critiqued on how you run your business or load equipment
I think he’s talking about running a chain through the articulation point. That’s how I was tought.
It was probably your buddy commenting that in the white truck that tells you can't park there. He's a professional.
Good morning
Not necessarily your getting it done 🤙🏽
It is just a safety device , some haulers use them and some do not .
Part of where you're tying it down is by the frame so I think he's misspelling or misspeaking
DOT can get you for not having that articulation lock in place. Take that as you will. For what it's worth, I don't pin that crap either lol tie down 4 corners and roll🤷♂ If DOT wants to get you on something, they'll get you regardless.
The only way that's articulating is if you roll over. And then you got bigger things to worry about.
I guess if you were taking the truck and trailer around a banked oval race track , a frame lock would be in order.
I hope this once you put your fenders on that you don't keep forgetting to raise up the neck brace on the trailer.
That neck brace can wreck a set of fenders QUICK.
He doesn't he's already junked 2 sets of fenders
Ooh hadn't seen the fenders on it yet , got to go back some videos I guess.
You are hard working no dispute there but according to fmcsr any machine that articulates must be secured on all four corners of the front of the unit and rear unit unless it is equiped with a mechanical locking device. The only thing i dislike about drivers is to make a statement that I'm only going 10 miles! Accidents can happen at anytime and if you cause injuries those lawyers for the plaintiff will have a field day with you in court. And the dot will be right behind. Your right though people should be nice about giving their opinions. Be safe ! And cover your ass against the money grabbers. You should have a small green book with the fmcsr's in the truck.(its required)
Noted thanks
Little hard on the gloves when you run over them with a roller
Don't know about Florida but here in Indiana, anything articulate that can be locked better be. DOT loves to look for that. One thing I know for sure. There is nothing lazy about you.
Are you interested in a light load run from San Antonio, Tx to Bunnell, Fl?
I can't believe you got that comment got to love the haters though much as I hate they still watch
That's right bro👊
Ordering a new 589 (I know), but what color green is that?
I don’t remember we call it diesel life green lol just show your rep a picture of my truck he should know
There is no way you can
GM Chris u are far from lazy the way u hustle the work u do shit he just jelly bc he ain't got the bad ace Pete like u got and no were near the work u got
I do think this guy is full of BS