To load the blade.....slide the slide handle on top of the knife all the way to the front towards the blade end. This causes the black button on the left side to pop out. Now push in that black button as you insert a blade. You can get the blade to lock in two different positions so the blade sticks farther out or farther into the knife.
Unbelievable that the package didn't provide any instructions! The trick is to move the slider all the way up and then insert the blade all the way in - until it forms that perfect triangle with the tip of the handle. It SHOULD be obvious but it is NOT. I tried various combinations but didn't get it quite right - so thank you!
I have been using these knives for quite some time now and it amazes me how many people complain that it does not work correctly. Some say it takes an hour to get out of package. Think these people may not want to use a razor knife if they can't get it out of packing or can't get the blades in. Wow, can they wipe their own butt??
LOL man I don’t understand it. I inherited some tools from my father after he passed away and I found 3 of these blades in his set. He was a master carpenter and the head of the carpentry department at the Art Center in my town and he appreciated a nice tool for sure. I was able to figure this knife out quickly without any manual, video, etc. believe me I’m NO expert but it is SO MUCH BETTER than those shitty ass single screw basic ass blades. Mine has been used and still I can just hold the knife blade down press the little button and the blade drops right out and on the newer models you can slide a new blade in and it auto locks no need to press anything. Also has a nice quick access storage for blades and a handy seat belt cutter type thing on the bottom side in front of your fingers. Great great tool 👍🏻
I could not figure out how to get the blade on. Ty bro. As soon as you did that, I'm like oh my God that is so fucking easy. I just smacked myself in the forehead like what am I doing.
do u have to say fucking. i am not from america but i understand that f word is your most popular word and the first word u teach your children. I thought america was a christian nation. it ain't. muslims are good and decent people, christians are not. f u
This thing didn't even last more than one cut, then the blade jammed inside of the knife. I removed the screws and had to play with it for a while to determine that the way to open the housing after removing the screws was to pull down on the lower yellow grip (with DeWalt imprinted on the sides). I was to get it working, but it's only a matter of time. This knife is a disappointment.
Feels great in the hand, but, the DWHT10046 is the WORST utility knife I have ever had. That blade change mechanism does not work as shown. Google it and you will see thousands of post of people giving up that tossing this junk out, it is that frustrating. A 3/32 hex bit is the only way to change this blade. The basic single flat head screw type of knife is MUCH better than this junk.
Been using them for quite some time and they work just the way they should. Thousands giving up and throwing them away. Wow no wonder Biden got elected..
![Shenseea - Dating Szn (Options) [Official Music Video]](http://i.ytimg.com/vi/eUePmZFIXUg/mqdefault.jpg)
To load the blade.....slide the slide handle on top of the knife all the way to the front towards the blade end. This causes the black button on the left side to pop out. Now push in that black button as you insert a blade. You can get the blade to lock in two different positions so the blade sticks farther out or farther into the knife.
Man I love you. How is something this simple so fckng hard to figure out? Thanks for this, you saved me today.
I just found one of these on my exerciser walk. I just cleaned it and loaded it up with 6 new blades.
Thanx for the video my Bladed Brother 👍 ⚔️ ✝️ 🇺🇲
Everything is so perfect in RUclips. I just. Bought one and threw it against the wall....POS !!
Thanks! Wish all tool demonstartions were exactly like this! Only show what you need, no talking. Fast solution to reloading the blade, thank you!
Thank you, It was driving me nuts, your video showed me what I was doing wrong. Much appreciated.
Thank you, finally got my jammed one working again from this
I thought it was just me. Apparently not.
Omg. I haven’t used this blade in almost two years since I bought it, thank you for the video. Now I can load it
Unbelievable that the package didn't provide any instructions! The trick is to move the slider all the way up and then insert the blade all the way in - until it forms that perfect triangle with the tip of the handle. It SHOULD be obvious but it is NOT. I tried various combinations but didn't get it quite right - so thank you!
Great! Now how do I take an old blade out?
I have 2 of them the best knife ever no other comes close..easy change blade is a dream..
Lmao the harbor freight clone is the same thing much cheaper. Doyle for life
Gracias
I have been using these knives for quite some time now and it amazes me how many people complain that it does not work correctly. Some say it takes an hour to get out of package. Think these people may not want to use a razor knife if they can't get it out of packing or can't get the blades in. Wow, can they wipe their own butt??
LOL man I don’t understand it. I inherited some tools from my father after he passed away and I found 3 of these blades in his set. He was a master carpenter and the head of the carpentry department at the Art Center in my town and he appreciated a nice tool for sure. I was able to figure this knife out quickly without any manual, video, etc. believe me I’m NO expert but it is SO MUCH BETTER than those shitty ass single screw basic ass blades. Mine has been used and still I can just hold the knife blade down press the little button and the blade drops right out and on the newer models you can slide a new blade in and it auto locks no need to press anything. Also has a nice quick access storage for blades and a handy seat belt cutter type thing on the bottom side in front of your fingers. Great great tool 👍🏻
Thank u !
I love my blade!
👍🏾👍🏾👏🏾
Yeah but how do you get the old blade OUT
I could not figure out how to get the blade on. Ty bro. As soon as you did that, I'm like oh my God that is so fucking easy. I just smacked myself in the forehead like what am I doing.
do u have to say fucking. i am not from america but i understand that f word is your most popular word and the first word u teach your children. I thought america was a christian nation. it ain't. muslims are good and decent people, christians are not. f u
How do you get the old blade out? My Fn god
It's easy you're just a retard
두일공구에서 공구를 구매해 봤는데, 이거 하나는 정말 차별성이 있었습니다. 배송 포장을 거의 완벽하게 완충을 해서 보내 주었습니다. 제가 옥션 VVIP인데, 공구 판매 업체 중에서 이정도로 배송 포장 잘 해서 보내주는 곳은 두일공구가 원탑입니다.
품질. 가격. 규모에서 경쟁력 있는 업체.
천안에 있어 토요일에 자주 이용했는데 토요일 근무를 안한 후로는 시간내어 가기가 힘드네요.
da no jodas al chino
The blade sticks out too short
Presio de la nabaja
I fucking hate this knife. Any knife where you need a youtube tutorial on how to use, should be trashed.
This thing didn't even last more than one cut, then the blade jammed inside of the knife. I removed the screws and had to play with it for a while to determine that the way to open the housing after removing the screws was to pull down on the lower yellow grip (with DeWalt imprinted on the sides). I was to get it working, but it's only a matter of time. This knife is a disappointment.
Feels great in the hand, but, the DWHT10046 is the WORST utility knife I have ever had.
That blade change mechanism does not work as shown. Google it and you will see thousands of post of people giving up that tossing this junk out, it is that frustrating.
A 3/32 hex bit is the only way to change this blade. The basic single flat head screw type of knife is MUCH better than this junk.
It's a total piece of crap
Been using them for quite some time and they work just the way they should. Thousands giving up and throwing them away. Wow no wonder Biden got elected..
@@jimg2885 figures another trumptard supporter
@@jorgemartinez1598 Guess you are one that can't get it out of the package and load a blade in it.
Worst purchase I’ve ever made. Absolute junk. You risk serious injury to change blades.
No you don't special ed kid