Install Serial Drivers for ESP32 (macOS, Windows, Linux)
HTML-код
- Опубликовано: 20 авг 2024
- Before you can program the ESP32, you need to install a driver for the USB-to-UART chip. Depending on your board that might be the CH340 or CP210x chip.
🔗 Driver download links:
- CH340 (Windows & Linux): learn.sparkfun...
- CH340 (macOS): github.com/adr...
- CP210x (Windows, macOS & Linux): www.silabs.com...
⚡️Other videos in this series:
• ESP32 + Arduino
(Everything you need to know about programming the ESP32 by using the Arduino Framework)
🌍 Social
Twitter: / savjee
Facebook: / savjee
Blog: savjee.be
Become a Simply Explained member: / @simplyexplained
Thank you so much for the quality content! :)
p.s. (for people using linux and need the CP210x driver), the driver is already maintained as part of the linux kernel.
(ex. /lib/modules/4.15.0-108-generic/kernel/drivers/usb/serial/cp210x.ko)
So my question is how do you install the driver?
Mine doesn't have a chip with numbers like that.
Thank you so much. I didn't know how to fix the problem.
Fantastic! Thanks much for this pretty straight forward way to allow communication with my HiLetgo ESP-32S. I looked high and low for a solution. Thanks!
How do I get com port for ESP32 espressif for windows 11?
I tried CP210X universal Windows Driver V11.3.0 6/24/2023
I use Arduino IDE 2.2.1 with 115200 baud, but it didn’t work.
The following works fine, Arduino UNO, UNO R4 WiFi and UNO R2 WiFi
Please help.
man this is frustrating i have 4 boards and i cannot figure out how to flash them at all. i have the file opened it ran it and the wizrard said it cldnt find a drive for it i had it plugged in?
bro didnt even tell the process install
I know that’s why I clicked, too!
Thanks, this helped me a lot!
I have windows 10 can't seem to recognise the chip
Before you can program the ESP32, you need to install a driver for the USB-to-UART chip. Depending on your board that might be the CH340 or CP210x chip.
My boards don't have UART .. ESP32-C3 SuperMini and ESP32-S3 Zero. I tried to refresh Flash Bootloader and now the board is not recognized when connected to USB
Linux Buster was able to work and recognize both of these chips without any need to install any drivers.
However the issue I'm having is with the latest replacement chip CH9102F... Do you have any information to share with regard to this chip? Thanks!
Good info thanks 👍👍
any idea for esp32 with ch9102x driver? cant find the correct driver
have you found the driver?
Same problem
😢😢
I installed both the CH340 and CP210X drivers and it's still not working. Any ideas on what might be the problem? Tried different USB cables as well
Might be CH1902
@@richmiller540 but how to download ch9102 driver?
i installed both the ch9102 and ch340 drivers but its still not working 😢
@@glennimmanuel9338must be a faulty board.
Sehr gut
My ESP32 uses CH9102X chipset and I cannot find any drivers for it , please someone help me with this
Sam's problem here , did you find the solution??
hello, I cant access the website since it says "access denied" on me everytime I try and download the universal server.
Is there any way to download it?
I just bought 2 of them. Bluetooth on board saves room because I need very small enclosures.
Can you please share driver link of esp32s3 sense
how do you install the driver on win10? there's no exe file, only a inf file but when i right click and click install, something pops up, says operation completed, but nothing happens
Thanks for the video, and I know you mean well, but I am not able to open a com port on either mac osx or windows using these drivers, and I have tried both of them on bot operating systems. This, of course is a big problem that nobody is covering - really - everyone that succeeds may be lucky.
Even for me Mera gadi 55a::
hello, have you been able to solve it?
tx for links
Thank you very much
help, the page didnt show any software
Thank you so much.
great video too bad I can't install the ARCELI WeMos D1 R2 WiFi ESP8266 driver on my Windows 10 no matter what I do
thANKU BROO
its shows access denied when i click the option to download it :(
Mine has ch1902
Hi thanks for your video but I can not get my ESP32 to connect to any of my pc's or laptop's!
I'm running on the latest Windows 10 and Arduino IDE and have added ESP32 to Aruino IDE but port# remains blank.
My ESP32 does not have any chips with CH340 or CP210x numbers. I have installed the Silicon Labs Windows 10 universal driver.
Any help would be most grateful
Did you find a fix?
@@stainlessmacbeth6348 I fixed the issue... You just need to install the drivers. It's a bit of trial and error on which one will work but one of them did... I think it was the cp210x for me
HI am having esp32 wroom 32UE wifi module .I want driver for that in linux. Could you please suggest some path?
Could someone please tell what are the drivers for Windows 10 ? Thank you very much
link no available
My laptop device manager doesn’t show port option..
At the top click view then show hidden items
thanks!
which ones do i install?
can anyone help me out with Seeduino V4.2. My mac (catalina) isn't detecting serial port, neither showing in Arduino IDE. I tried every driver out there. Nothing seems to work. Even changed the cable.
I'm also experiencing the same problem
@@_frajota Me too using Sierra... OSX 10.12.3
Did you fix your problem? I'm dealing with the same thing :(
idk there is non of these numbers
Thank you very much for the video, very useful! A query which board should I choose in the Arduino, I can't get it to compile because it gives me an error on the board. Greetings----Muchas gracias por el video, muy útil! Una consulta que placa debo elegir en el Arduino, no logro que compile por que me da error en placa. Saludos
como lo solucionaste?
@@maxmoon1712 Elegi en Placa> ESP 32 Dev Module. éxitos
@@maxmoon1712 atencion que tengo MAC y Arduino Ide 1.18 con High Sierra, si intentas en Catalina debes descargar la version 2. de IDE Arduino, ya que catalina no ejecuta aplicaciones de 32 bits como es el IDe de arduino 1.18.
@@enriqueatala2567 gracias, al final el problema era el cable, se me fundió el nodemcu
@@maxmoon1712 No digas, hay que ver entonces y confrirmar que estén llegando los 5 volts y no mas de ello, por lo que que he leido son muy sensibles al voltaje.
I'm so lost
pls be vegan animals also have lifes Radhe Radhe