Very helpful and well made video. Thank you! I’d had my PTO shaft out and the collar fell off. Had to remove the cover and fish it out with a magnet. First time I’d ever removed the PTO shaft and the cover so I was lost haha.
Hello bundy, I would like to contact you about a jd 4040, my mater is a spinning noise inside the loading piston, but I really don’t know how to open it or if it’s accessible enough from the rear to open and operate? Could you help ? Thanks Arnaud
There is a trans pump under there, Im not sure about a spinning noise. Try cleaning the suction screen and change the filter before getting the spanners out.
I was just wondering why you weren't using the impact nut gun(I watched the videos in reverse order)then out it came before I could ask ☺, great to see you back on the 2030, with this weeks 3 videos The only thing that I have seen slightly different to the 2035 is the depth control function selector lever and the actual lever that goes to the rear hydraulic auxiliary plugins, mine is the normal spring back to centre type. I have not looked inside the cover to find any other differences but when I do I'll let you know if there is. Great helpfull series of videos lance. thanks for taking the time to film & share. cheers, Derek
Love your videos very helpful! Was wondering if I could get some help I got a 2040 john deere I rebuilt the steering column with your help. The worm gear striped the threads. We'll after rebuilding I'm getting air in the system and I replaced the valve that control's the flow to the colum and replaced the relief bypass valve with no luck. Is there another valve prone to causing air? Or am I missing somthing?
Probably not, air is not a problem normally they tend to self bleed. If you have shuddering on the linkage it is often a blown o ring in the lift cover that doesnt let the front pump catch up and destroke.
@@BundyBearsShed would that stop flow to the column? I can get some flow to it but no where near what it's supposed to be. And I cracked a few lines and it was constant air coming out even rigjt off the pump. That's why I thought I was sucking air.
Hi Lance... Howard hear from Yorkshire, Are you planning to do a video on replacing the lift cover? but for now, is there anything to look out for when replacing the lift cover?
Hello. I hope you're doing well. I have a 1970 John Deere 3120 and the lift arms will not lower by using the lever. We recently flipped the rockshaft over and discovered atleast one e-clip fell off of the internal linkage causing the spring to fall off which is why I felt no resistance moving the rockshaft lever. The 3pt lift arms will only lower if I remove the plug on the left side. Then, once engine runs, even with the 3pt lift arm in the lowest, down position, the lift arms immediately raise on their own. We removed the check valve on the right side and discovered someone had installed it backwards. Yet after we installed it correctly, the lift arms still would not lower. Do you have any suggestions, recommendations, or advise? I wonder if one of the 2 internal valves within the rockshaft cylinder are causing it to not lower. Thanks so much for your review!
fiest thing is to check the rate of drop knob in front of the seat isnt closed off. If the cam that comes up from the draft isnt sitting on the teardrop on the rockshaft and has moved to the side it will raise instantly. It is important for the roller to run on the cam or teardrop.
Thanks again for your review and advice!! We followed your recommendations and still could not get the lift arms to drop/lower. We also followed JD's technical adjustment processes and it did not help either. I bought the tractor knowing the lift arms did not work. They were raised. I was only able to drop them by removing the plug on the left side. We recently took the rockshaft cover off and discovered 2 e-clips fell off causing the spring and bracket inside to fall apart. We re-assembled, installed everything back, changed fluids and filter. I dont recall how long it took but after tractor idled, internal cavities filled with oil, the lift arms immediately raised even with lever in the fullest down/lowested position. We are concerned that the internal down valve is not functioning, its not relieving oil or pressure. We are also concerned that we could not get the internal bracket assembly to secure/fasten to the front casting well and question whether it will fall apart again. We also discovered the right side plug that has an internal/removable valve was installed backwards previously per drawings we found. Yet when we installed it correctly per the drawings, nothing else changed. Do you have any recommendations? We're leaning towards taking it apart again but removing the cylinder and checking both valves inside.
Thank you, the video was very helpful for someone who hasn't taken the cover off before. When replacing the cover, I have a new gasket, but is there a sealant that should be used in conjunction with the gasket? If so, do you have a recommendation? Thanks again for posting your videos.
I have a JD 2940, when I removed the Rockshaft housing, there was a little hard plastic grommet sitting in a reces in the hydraulic feed side into housing.. So you know of a part number for that, I can't find one anywhere.. Thanks
I recently purchased a JD 2030 and have been wondering what the lever on the left side is that sticks up. Mine is broken off half way down but still moves okay. I just cant figure out what the heck it does. It's hard to find info online when you don't know the name of a part. Can you shed any light on this please?
@@BundyBearsShed thanks mate. I think you're right. It's missing the pedal so looks different to most. I wonder if someone's taken it off or if some came without?
This looks the same as on a 3130? I do have 2 questions if you would sir? Our 3130's 3 point alwas worked fine but now the draft control seems a bit funky, i.e. if I put it in a position it likes to move all the way up and if I move it down again it goes all the way down if you leave it a bit. Could this be seals in the lift cover? Also the scv valve "leaks" on the raise direction. If you leave a implement connected and the tractor is running it will slowly raise up with the lever in neutral. Could this also be as simple as an old seal?. Thank you for your great videos
Very helpful and well made video. Thank you! I’d had my PTO shaft out and the collar fell off. Had to remove the cover and fish it out with a magnet. First time I’d ever removed the PTO shaft and the cover so I was lost haha.
I have done similar but fished it out with a piece of strong wire.
Thank you, this was VERY helpful.
I need to pull the cover off a 1967 710 and have never done this before.
Scott
Go for it!
Very interesting. I had no idea where the flow for the remotes was adjusted at.
You never stop learning when playing with old tractors.
@@BundyBearsShed😊8..⁰⁰⁰😊😊½❤❤❤❤❤❤❤❤❤❤
Hello bundy, I would like to contact you about a jd 4040, my mater is a spinning noise inside the loading piston, but I really don’t know how to open it or if it’s accessible enough from the rear to open and operate? Could you help ? Thanks Arnaud
There is a trans pump under there, Im not sure about a spinning noise. Try cleaning the suction screen and change the filter before getting the spanners out.
I was just wondering why you weren't using the impact nut gun(I watched the videos in reverse order)then out it came before I could ask ☺, great to see you back on the 2030, with this weeks 3 videos The only thing that I have seen slightly different to the 2035 is the depth control function selector lever and the actual lever that goes to the rear hydraulic auxiliary plugins, mine is the normal spring back to centre type. I have not looked inside the cover to find any other differences but when I do I'll let you know if there is. Great helpfull series of videos lance. thanks for taking the time to film & share. cheers, Derek
The 2030 has the spring back one I just have the screw it to hold it in neutral, I will probably pop it apart just for a video at some stage.
Love your tractor repair videos keep up the great work
Thanks, will do!
One question what is the nut and bolt in the left side of rockshaft cover?
I think it was an old hydraulic supply at one stage.
Love your videos very helpful! Was wondering if I could get some help I got a 2040 john deere I rebuilt the steering column with your help. The worm gear striped the threads. We'll after rebuilding I'm getting air in the system and I replaced the valve that control's the flow to the colum and replaced the relief bypass valve with no luck. Is there another valve prone to causing air? Or am I missing somthing?
Probably not, air is not a problem normally they tend to self bleed. If you have shuddering on the linkage it is often a blown o ring in the lift cover that doesnt let the front pump catch up and destroke.
@@BundyBearsShed would that stop flow to the column? I can get some flow to it but no where near what it's supposed to be. And I cracked a few lines and it was constant air coming out even rigjt off the pump. That's why I thought I was sucking air.
@@brianyoung8097 yes the trans pump would be sucking air
Hi Lance... Howard hear from Yorkshire, Are you planning to do a video on replacing the lift cover? but for now, is there anything to look out for when replacing the lift cover?
Noy yet as I need to do the gearbox if I ever find time. Just line up the cam with the roller and you are good to go.
Hello. I hope you're doing well. I have a 1970 John Deere 3120 and the lift arms will not lower by using the lever. We recently flipped the rockshaft over and discovered atleast one e-clip fell off of the internal linkage causing the spring to fall off which is why I felt no resistance moving the rockshaft lever. The 3pt lift arms will only lower if I remove the plug on the left side. Then, once engine runs, even with the 3pt lift arm in the lowest, down position, the lift arms immediately raise on their own. We removed the check valve on the right side and discovered someone had installed it backwards. Yet after we installed it correctly, the lift arms still would not lower. Do you have any suggestions, recommendations, or advise? I wonder if one of the 2 internal valves within the rockshaft cylinder are causing it to not lower. Thanks so much for your review!
fiest thing is to check the rate of drop knob in front of the seat isnt closed off. If the cam that comes up from the draft isnt sitting on the teardrop on the rockshaft and has moved to the side it will raise instantly. It is important for the roller to run on the cam or teardrop.
Thanks again for your review and advice!!
We followed your recommendations and still could not get the lift arms to drop/lower. We also followed JD's technical adjustment processes and it did not help either.
I bought the tractor knowing the lift arms did not work. They were raised. I was only able to drop them by removing the plug on the left side.
We recently took the rockshaft cover off and discovered 2 e-clips fell off causing the spring and bracket inside to fall apart. We re-assembled, installed everything back, changed fluids and filter. I dont recall how long it took but after tractor idled, internal cavities filled with oil, the lift arms immediately raised even with lever in the fullest down/lowested position.
We are concerned that the internal down valve is not functioning, its not relieving oil or pressure. We are also concerned that we could not get the internal bracket assembly to secure/fasten to the front casting well and question whether it will fall apart again.
We also discovered the right side plug that has an internal/removable valve was installed backwards previously per drawings we found. Yet when we installed it correctly per the drawings, nothing else changed.
Do you have any recommendations? We're leaning towards taking it apart again but removing the cylinder and checking both valves inside.
Thank you, the video was very helpful for someone who hasn't taken the cover off before. When replacing the cover, I have a new gasket, but is there a sealant that should be used in conjunction with the gasket? If so, do you have a recommendation? Thanks again for posting your videos.
Yes I like to use loctite 515, it seems to help a lot.
Gracias porenseñar tus conocimientos
Thankyou.
I have a JD 2940, when I removed the Rockshaft housing, there was a little hard plastic grommet sitting in a reces in the hydraulic feed side into housing.. So you know of a part number for that, I can't find one anywhere.. Thanks
The piece is usually rubber L57519 is probably the number for it.
Hello Mr.Bundy i need help 😢 i' m removing lift cover in my john Deere 2140 but i have no idea how to fold the cover back
You need to just lift it straight up.
@@BundyBearsShed ok but from transmission on top of is a rod and IT must be in cover lift
Sorry for my bad english im farmer from Poland
should you feel resistance when moving your rock shaft lever with engine off or on? 3120 lift arms will not lift. everything else works well.
Just a little yes.
I recently purchased a JD 2030 and have been wondering what the lever on the left side is that sticks up. Mine is broken off half way down but still moves okay. I just cant figure out what the heck it does. It's hard to find info online when you don't know the name of a part. Can you shed any light on this please?
Im thinking the diff lock is what you are refering to.
@@BundyBearsShed thanks mate. I think you're right. It's missing the pedal so looks different to most. I wonder if someone's taken it off or if some came without?
Most had it that I have had.
This looks the same as on a 3130? I do have 2 questions if you would sir? Our 3130's 3 point alwas worked fine but now the draft control seems a bit funky, i.e. if I put it in a position it likes to move all the way up and if I move it down again it goes all the way down if you leave it a bit. Could this be seals in the lift cover? Also the scv valve "leaks" on the raise direction. If you leave a implement connected and the tractor is running it will slowly raise up with the lever in neutral. Could this also be as simple as an old seal?. Thank you for your great videos
The SCV problem is possibly a poor poppet valve seat. I would try to do the draft adjustment first on the draft problem.
lo deben trasmitir en español
👍