This is a great video. Not a lot of useless information that has nothing to do with the job at hand. Short, concise, very professional. Please continue to do more videos like this. Thank you!!!
Dear brother,you are a genius,you made understanding so simple.You are so informative and clear in your communication.You are a great teacher. God bless you.
Pro tips & Pro video+audio quality !!! On par w/ Chris Fix. You helped me a lot. Thanks. (IMPORTANT : viewers read comment from Andrew about brake calipers on wrong sides)
2007 nissan pathfinder SE i have issues with my brakes like all other pathfinders ive noticed they tend to lcok up and slide icannot find the culprit< last resouurce today will be the brake hoses in hopes it will help< to mant close calls with car accidents
Wouldn’t that suck in old, waterlogged brake fluid back into the system? The length of pedal travel is the same going down as going up. So if you expel x amount of dirty fluid by pressing the pedal, won’t you vacuum back the same amount of dirty fluid from the catch can?
This doesn;t work when you are happy single. You need a second man to push the brakepedal and the other closes the nipple when he releases the brake. Buy a spare fillercap at dealership dril a hole, and put an air nipple in, and adjust your aircompressor to 2 bar, this way there is constant pressure in the system and you can just open the nipple and wait for all the air comes out.
Always use new crush washers when doing this. The reason they are copper is because copper is soft and crushes into any imperfections to make a really good seal(brake systems have to deal with very high pressure), if they have already been crushed from previous use then they are no longer a crush washer. 🤦🏼
Every car you tuber must create content in exactly this fashion. No fucking around, straight to the point. Love it
Thanks, I don't like to waste time of my viewers
Right it's like he did this video on his lunch break
Thank you so much for the quick easy to follow video !!! ❤ like skiddin said very well structured video!
Thanks brother. Helped me and my mechanic grandpa properly attach the hose to the line after several attempts 😂
Glad it helped
Great video!!! Straight to the point! Taught me how to bleed brakes and change brake hose in less than 4 minutes.
Always to the point, don't like to waste time
If you are just changing the front brake hoses, we just need to bleed does brakes
This is a great video. Not a lot of useless information that has nothing to do with the job at hand. Short, concise, very professional. Please continue to do more videos like this.
Thank you!!!
Thats pretty much what i was going to say 👍
Thanks for watching, glad it was helpful and found it useful
Appreciate that
@@AliMECH Just found your channel by accident mate but you have a new sub here 👍
@GraveCareMaintenanceServices thanks, appreciate that
Thanks for the video man, just what i needed! Clear, simple and straight to the point. Love it, keep it up 👍
Gald it was helpful
Dear brother,you are a genius,you made understanding so simple.You are so informative and clear in your communication.You are a great teacher. God bless you.
Way better than the other video I was trying to watch on this , I couldn't see everything he was doing .
Thanks for noticing, I try to have good camera angles on my videos
@@AliMECH you're great at the angles of filming, it was a very helpful video . Short and right to the point.
thanks for watching, im glad it was helpful for you
This guy explained it perfectly thanks brotha, I don’t need to call a mechanic now.😅😅😅
Glad it was useful 🙏🙏
@@AliMECH yes thanks it feels good to accomplish little things like that. Wife be treating me like if I took out an engine and put it back on😂😂😂😂😂😂😂😂😂
Nice video! Quick, no fuss and showed us everything we need to now.
Glad it was helpful!
Omg so simple and straightforward , love it!
Thanks for watching
Thank you so very much for this easy to follow video.
Thanks for watching
Best learning channel on RUclips
Thanks, appreciate that 🙏🏻🙏🏻
Pro tips & Pro video+audio quality !!! On par w/ Chris Fix. You helped me a lot. Thanks. (IMPORTANT : viewers read comment from Andrew about brake calipers on wrong sides)
Thanks and appreciate your support, Glad it helped!
Easy to follow video. Thank you. Do ya have to bleed both sides if u only replace one sides hoses?
No, just the replaced one
thank you, you make it look so easy
You’re welcome
Thanks for sharing! Makes it easy to repair ✌🏻
No problem 👍
This video is perfect, thank you so much
Glad it was helpful!
Very easy replace hoses pipe. ❤❤
Yes they are!
another excellent v ideo from AliMECH. clearly explained well detailed. thnak you Ali!
Thanks for watching 🙏🙏
Well explained. Thanks
Glad it was helpful!
Thank you I have to replace mine, clear and easy steps
Glad it was helpful 🙏
Very Good Video ! Precise instructions and good Camera work !! Thank you !! Subscribed !
Thanks for watching
Dude you made this so easy and simple.
Glad you think so!
Very good video, thanksfor sharing
Thanks for visiting
Excellent video
Thank you very much!
Hey thanks bro. You helped me get back on the road.
I need to replace one of my brake hoses because of a leak. Do I need to bleed all four lines or just the line I'm changing.
Sure only the one u change
Great vid, I don't know why the sneaker pumping the break peddle made me laugh.
Thanks, I don't know why 😅
Outstanding video thank you 🙏
Glad it was helpful!
thank you, well done
Thank you too!
Hello, are the front break horse different or any can work on any side... thank you. 2008 BMW X6
Very good video
Thanks
Great content. 👍🏼
Thanks for watching
2007 nissan pathfinder SE i have issues with my brakes like all other pathfinders ive noticed they tend to lcok up and slide icannot find the culprit< last resouurce today will be the brake hoses in hopes it will help< to mant close calls with car accidents
Thank you bruddah
Any time
Thank you for a great vid! I use my pliers as a hammer too :)
No worries, we all did that before
Legend just diagnosed my hose had split and seems simple enough.
That's good you find it out ✌️
Thank you so much for this! Great video!
You're so welcome!
do these steps also work with the rear brake hose?
Sure, it will be same
Ty so much make my life ez
No problem
Very nice!
Thanks!
Thank you
🙏🙏
Why cant every how to for cars be like this😩😩😩😩😩😩😩
Most ppl want to make the video longer, but I want it short as possible
break hose and break pipe both are same thing ?
Excellent
Thanks
Awesome quick and simple . No need to put smaller hole in bleeder bottle ?
Thanks, the hole I made for the hose is a bit bigger than the hose, so it let's air to escape and no need for a small hole
@@AliMECH my apologies the way I was describing was a one man bleeding method , again thanks for the video
No problem, you can do one man bleeding by just opening bleeding valve and brake few times and then close the valve
Good job mate. Thanks for the video
Thank you Dude .❤
You're welcome!
I was the 1k like
That's awesome, thanks
Hi from Albania 🇦🇱🇦🇱🇦🇱
🙏🙏
Bro is it safe to use the Carb cleaner to clean the MAF sensor or the mass air flow sensor? Thank you.
No, never use carb cleaner them, there is special cleaners for MAF and mass air flow sensor
You could just fill the bottle halfway as well as the res and pump slowly by yourself until no bubbles
Wouldn’t that suck in old, waterlogged brake fluid back into the system? The length of pedal travel is the same going down as going up. So if you expel x amount of dirty fluid by pressing the pedal, won’t you vacuum back the same amount of dirty fluid from the catch can?
@@Dr.Jekyll yeH
Where did you buy those brake hose ?
thanks
Welcome
where do u buy online break hose
Respect 🫡
Thanks
Nice !
Nice lody
But if you have ABS how do you bleed the system?.
Do I have to bleed the 4 wheels
no, only the ones you changed the hose
Mashallah
Slam from pakistan
Hello Pakistan ✌✌
Had to change a brake hose that was bad internally .
دەست خۆش.
Supas
What are the torque specs
This doesn;t work when you are happy single. You need a second man to push the brakepedal and the other closes the nipple when he releases the brake. Buy a spare fillercap at dealership dril a hole, and put an air nipple in, and adjust your aircompressor to 2 bar, this way there is constant pressure in the system and you can just open the nipple and wait for all the air comes out.
A 2x4 pushed against the peddle works also. Lol. Always working alone sometimes you have to get creative.
my friend use brake fluid dot 5.1 you will notice the difference
For sure, I will give that a try, thanks
Always use new crush washers when doing this. The reason they are copper is because copper is soft and crushes into any imperfections to make a really good seal(brake systems have to deal with very high pressure), if they have already been crushed from previous use then they are no longer a crush washer. 🤦🏼
You can also heat to glowing red with a torch to resoften them,and like he did sand them a little.
Just like that, huh.
This is car golf 5
Erbil Kurdistan
✌🙏🏻🙏🏻
Nice work .
Thanks
Thank you 👌
No problem
Thank you
You're welcome