This is the only tutorial that got me going. I'm working with arma but principals are the same, and the PMC guide while it helpd me extract real world data had me completely lost in actually getting that data into terrain builder and how to use the tool. Thanks a lot
This is the most elaborate beginners tool available. I followed every step and now have a map in terrain builder, i wouldnt have been able to get started otherwise. Thank you for your contribution; and the time you put into this tutorial.
I wished this tut' was around 6 years ago. I spent months trying to get going on a project and finally gave up. Moving on, my wishlist now has a new tut' just as you did for DayZ but now for Reforger. As you said, there is alot of info but it's scattered. It would be great to see your simple calm explanations to get everything in place so we can start sculpting and placing objects. If you could include how to get heightmaps, Satmaps and explain all the data information like cell size etc. I may just go back to Bulldozer and pick up where I left off with that old project, thanks to your videos!
Little confused here, watched all the videos before this and ended off with the Qgis. Is there not a video of Qgis to Terrain builder 😢 These are must help videos I’ve seen so far.
Great video, so far it's been very helpful! Unfortunately, I've gotten stuck at 26:39 because when I double click after forming a polygon, it disappears instead of highlighting with no error message. I would really appreciate if you could help me with this!
sometimes you can have overlapping points which hides it (the poly layer). Select the tool that looks like a hand with the index finger point up and a orange circle at the tip of the index finger (selection Tool). then once this is selected go ahead and click on the area where you made your poly selection. if that is the issue it will show you all the points and you can fix the overlapping
Thanks for the offer. I tried various forums and didn’t get a reply that worked, started from scratch again, hit the same wall and after two months gave up to get my evenings back! If it was meant to be I’d have found a way! Enjoy making maps, it was enjoyable whilst it lasted! I can recommend the North Yorkshire Moors as an area worthy of mapping! Thanks again mate.
Yes I am glad to announce with my little post I did earlier today that the progress will now be continued now that some other things have been addressed
I'm making a map for Arma 3 and I followed all the steps but once I get into bulldozer it says can not load texture s_000_000lco.paa. I followed everything to a T except for when I needed to customize for my own map. Any ideas?
Hey have you joined my WDR discord? World Design Resources. If you send a screenshot of your buldozer setting I can help out, sometimes it’s something simple. And we can troubleshoot from there.
This is the only tutorial that got me going. I'm working with arma but principals are the same, and the PMC guide while it helpd me extract real world data had me completely lost in actually getting that data into terrain builder and how to use the tool. Thanks a lot
Glad to help, I should be able to get more content out soon as well.
100%!!!!
I spent half a day trying to learn this a year ago, and within 6 hours I actually have a functioning world with Great Assets!
was fun chatting with you live while watching my vidz its coming along well. @@DigitalHi5
This is the most elaborate beginners tool available. I followed every step and now have a map in terrain builder, i wouldnt have been able to get started otherwise. Thank you for your contribution; and the time you put into this tutorial.
Hey man! was wondering, where did u find the tool? i looked through the whole internet and was unable to find anything working
Awesome set of videos and Excellent job pulling all of this information together!
Glad it was helpful!
I wished this tut' was around 6 years ago. I spent months trying to get going on a project and finally gave up. Moving on, my wishlist now has a new tut' just as you did for DayZ but now for Reforger. As you said, there is alot of info but it's scattered. It would be great to see your simple calm explanations to get everything in place so we can start sculpting and placing objects. If you could include how to get heightmaps, Satmaps and explain all the data information like cell size etc. I may just go back to Bulldozer and pick up where I left off with that old project, thanks to your videos!
I just found this too . LOL
This is a great tutorial! I've joined the discord but I was wondering where I can find the file with all assets as a library?
Great job.Thank you....
I'm going to try this for Arma 3 - thanks mate!
Hope you enjoy it!
my Map is floating in the air, way above and off to the side of the water in Buldozer. How do I get my map level to the ground, with the water?
can you make a video on how to test your map in dayz were you can walk around a look at things. All the other videos on this I cant get to work.
Good idea sure, are you wanting to test in offline mode or on a live online server?
Little confused here, watched all the videos before this and ended off with the Qgis. Is there not a video of Qgis to Terrain builder 😢
These are must help videos I’ve seen so far.
Great video, so far it's been very helpful! Unfortunately, I've gotten stuck at 26:39 because when I double click after forming a polygon, it disappears instead of highlighting with no error message. I would really appreciate if you could help me with this!
sometimes you can have overlapping points which hides it (the poly layer). Select the tool that looks like a hand with the index finger point up and a orange circle at the tip of the index finger (selection Tool). then once this is selected go ahead and click on the area where you made your poly selection. if that is the issue it will show you all the points and you can fix the overlapping
When I open bulldozer the hills are vertical. Any ideas?
Do you still have any issues I could help with ?
Thanks for the offer. I tried various forums and didn’t get a reply that worked, started from scratch again, hit the same wall and after two months gave up to get my evenings back! If it was meant to be I’d have found a way! Enjoy making maps, it was enjoyable whilst it lasted! I can recommend the North Yorkshire Moors as an area worthy of mapping! Thanks again mate.
Are you continuing the series Sir ???
Yes I am glad to announce with my little post I did earlier today that the progress will now be continued now that some other things have been addressed
34.0 you mention the folder for DayZ Im doing Arma 3 would it be the same or different?
things should work pretty much the same for arma yeah.
@@ike_0zzy Thanks I've subbed you BTW. thanks for the shares love it
I'm making a map for Arma 3 and I followed all the steps but once I get into bulldozer it says can not load texture s_000_000lco.paa. I followed everything to a T except for when I needed to customize for my own map. Any ideas?
Are in my the world design discord because if you message me there with some screenshots I could probably help walk you through something
Does this work same way for arma 3?
Yes for the most part
when ever I open buldozer it just crashes or it says cant compile game script module pls help
Hey have you joined my WDR discord? World Design Resources. If you send a screenshot of your buldozer setting I can help out, sometimes it’s something simple. And we can troubleshoot from there.
@@ike_0zzy Yes and I posted in the help-questions channel.
How do I buy this ty
My Tutorials are free:)