Easy! How to Change Wheel Speed Sensor! ABS light on, Service Stabilitrak Chevy Equinox GMC Terrain
HTML-код
- Опубликовано: 10 сен 2024
- Easy! How to Change Wheel Speed Sensor! ABS light on, Service Stabilitrak Chevy Equinox GMC Terrain
In this video I will show you how to quickly replace your wheel speed sensor on a Chevy Equinox or GMC Terrain. This is an easy diy job that you will save money doing. This particular video is changing the sensor on the front right (passenger) side. Below are links to parts and tools for this job.
Dorman 970-046 Right Front Speed Sensor:
amzn.to/3XMMGRz
Dorman 970-086 Left Front Speed Sensor:
amzn.to/3GXxfAf
Mechanics Tool Kit
amzn.to/3iwDpJz
Jack and Jack Stand Combo
amzn.to/3nAFec1
Disclaimer for DC Auto Enhancement
We are doing our best to prepare the content of this site. However, DC Auto Enhancement cannot warranty the expressions and suggestions of the contents, as well as its accuracy. In addition, to the extent permitted by the law, DC Auto Enhancement shall not be responsible for any losses and/or damages due to the usage of the information on our website.
By using our website, you hereby consent to our disclaimer and agree to its terms.
The links contained on our website may lead to external sites, which are provided for convenience only. Any information or statements that appeared in these sites are not sponsored, endorsed, or otherwise approved by DC Auto Enhancement. For these external sites, DC Auto Enhancement cannot be held liable for the availability of, or the content located on or through it. Our Privacy Policy was created by the Privacy Policy Generator. Plus, any losses or damages occurred from using these contents or the internet generally.
2010 Chevy Equinox GMC Terrain
2011 Chevy Equinox GMC Terrain
2012 Chevy Equinox GMC Terrain
2013 Chevy Equinox GMC Terrain
2014 Chevy Equinox GMC Terrain
2015 Chevy Equinox GMC Terrain
2016 Chevy Equinox GMC Terrain
2017 Chevy Equinox GMC Terrain
Thanks. Mine is on the rear wheel but at least i got the idea now.
@@vernemil you probably already know that the speed sensor is built into the rear hubs. Thanks for watching!
??? No mention of the split CV Boot and grease flying all over?
That is a separate video
I really enjoy your videos. Ive had this problem with my equinox with abs stabiltrak light come on and I've replaced just about everything except the wheel sensors ..that will be next and the way you showed how simple it should be really helps. Thank you
The sensors themselves aren't difficult to change however, I don't think those are usually the problem. I think I said it in the video, I just bought the sensor basically hoping that was the problem. My problem ended up being the ring on the cv axle that the sensor reads. If you are able to inspect that ring before you buy the sensor, that would be best just to verify. I'm glad you like the videos. I have quite a few videos on the Equinox. if you have any questions, I'll do my best to answer them. Thanks again.
I have a 2013 Chevy Equinox. I received all of the same warning lights on my instrument panel. Can I unplug one wheel speed sensor at a time to determine which one may have gone defective? The auto parts store does not come up with an error code.
@@lgsr1 I think if you unplug one at a time, it will still act the same. You basically want the real time data pin point it
Great video thanks
Thank you, I hope you are able to get your vehicle repaired easily and inexpensively.
Hello I have a 2016 Chevy traverse LT AWD and I can't get my wheel speed sensor out of the dam hole not sure why it's in there so tight 😮. I tried pulling it out with pliers but broke it off inside I had to take off the wheel bearing and I took a punch and punched it out I tried cleaning out the hole best I can I put a new one in but went in very hard some one messed up this hole before I got this vehicle I think. it didn't fix my problem on my car it made it worse. ABS light, brake , service traction control and stability lights are on the dashboard. Any help with this would be greatly appreciated thank you
@dancurrier6421 I don't know where you live but, I wouldn't be surprised if that hole has just rusted and held that sensor in tight from swelling. One thing you could do is get a drill bit about the size of the body of the sensor and run it through the hole it mounts in. Did you happen to inspect the wheel bearing magnetic ring for cracks or missing pieces like mine had?
Gonna be doing mine tomorrow morning. Nice and easy. Was there a torque spec on the sensor or just hand snug? Did this fix your stabilitrak issue? I know the tone ring is sometimes a culprit on the wheel hub as well.
I would say that you would be safe at around 7 or 8 ft lbs. I didn't find a call out on that torque spec though
Se tiene que desconectar la bateria?
Just wondering if the magnetic ring is broken when replacing it can I lube the ring area to prevent rust.??
There may be something you can put on it, I don't know what it is though
I have 5 faults stored in the EBCM but no ABS light on dash, the light does work though. I'm getting a Service power steering and service stabilitrak with a traction control icon and check engine light on dash. What can cause this issue?
I just had a similar situation the other day and it was a steering wheel sensor. I just plugged in my scanner and reset it and it has been good sense then. I imagine a shop could plug in and point you in a good direction.
If a piece of the sensor is broken off do you need to tear into the bearing?
No but you may have to remove the bearing to remove the piece of the sensor that broke off. I would try to run a screw into the piece that is broken and see if you can get it out that way.
Will this cause the 4x4 to go off as well as abs and traction control light to go on? Also shaking steering wheel when driving?not sure if it’s this or the wheel bearing assembly
Yes, once I got over 20 or 25 mpg it would say something like all wheel drive disabled. Mine turned out to be a bad wheel bearing. I mention that at the end of this video.
What do you do if the sensor light don't go off. Does it have to be reset
Mine went off once I changed the wheel bearing. It has a crack. On the magnetic ring that the speed sensor reads. I think this light will go off on its own once the issue is corrected. But it could be possible to have to have it reset. Where you able to visually locate your issue?
how can you check the back side of the wheel bearing where the magnetic ring is located.??
Jack up the car, drive onto ramps, anything to get under the vehicle and you can visually inspect the ring from the back side of the wheel
I have a 2011 terrian 2.4l.. I will try looking tomorrow. Thanks
@@joehawthorn3018 good luck, Happy New Year
@@joehawthorn3018 good luck, Happy New Year