good video...would like to just add there are a pair of 8mm on the 2014 that hold a bracket on each side (important step at the 2:21 mark)...the passenger side is a tougher angle...id use a screw gone w/ extension to unscrew these and have wheel well plastic pushed as much as you can to access these bolts/bracket. The driver side is much easier to access. (based on my experience)
I spider cracked the paint on my bumper. You forgot to mention there is an 8 mm screw on both side of the car in front of the wheels. You can't see them you have to feel for them.
Comments are true. There is a plastic screw inside the bumper going up under the headlights, not easy to see. There was only one side on mine I assume the other has been off before. It’s so awkward I left it off on reinstall. It seems from RUclips vids that most people do as well.
We appreciate your feedback and understand the struggle of those awkward areas when carrying out repairs. At YOUCANIC, our aim is to empower car owners like yourself to manage vehicle maintenance confidently. We provide easy-to-follow guides, a powerful diagnostic scanner, and even factory repair manuals for deeper insight. Feel free to use these resources at www.youcanic.com. If you have any other inquiries or need assistance, don't hesitate to reach out on our site. We're here to support you on your car ownership journey!
You miss talking about two very important plastic screws on each side of the side connections. That caused me to damage my bumper. You should be banned from giving advice.
@@jxlliznbro what..there are 2 screws on each side that go from under the bumper tabs through the bumper bracket . Damn near every single car has a screw of some sort holding the bumper into the bracket , if u don’t take off the screws and take the bumper off you’re going to rip the tabs and not be able to but the bumper back on
@@jxllizn which screws are you talking about i know there’s 2 that go through the retainer into the fender , but there are also 2 underneath that go through the bumper tab through under the retainer. There are literally 2 holes that are in the bumper tabs made for those screws . Go ahead and show me the diagram i literally had to work on a fusion yesterday
I love how you told us to remove this and that but didn’t show where all of them are
good video...would like to just add there are a pair of 8mm on the 2014 that hold a bracket on each side (important step at the 2:21 mark)...the passenger side is a tougher angle...id use a screw gone w/ extension to unscrew these and have wheel well plastic pushed as much as you can to access these bolts/bracket. The driver side is much easier to access. (based on my experience)
I spider cracked the paint on my bumper. You forgot to mention there is an 8 mm screw on both side of the car in front of the wheels. You can't see them you have to feel for them.
There's actually 4 8mm bolts and 2 more screw push pins and some other stuff. I recommend taking this vid down and redoing it.
I need help taking off the connectors
Where did you purchase the front cover? With ford fusion logo?
Comments are true. There is a plastic screw inside the bumper going up under the headlights, not easy to see. There was only one side on mine I assume the other has been off before. It’s so awkward I left it off on reinstall. It seems from RUclips vids that most people do as well.
We appreciate your feedback and understand the struggle of those awkward areas when carrying out repairs. At YOUCANIC, our aim is to empower car owners like yourself to manage vehicle maintenance confidently. We provide easy-to-follow guides, a powerful diagnostic scanner, and even factory repair manuals for deeper insight.
Feel free to use these resources at www.youcanic.com. If you have any other inquiries or need assistance, don't hesitate to reach out on our site. We're here to support you on your car ownership journey!
Please can you use 2017 Fusion bumper to 2013 fusion
Yes from 13-17 everything is interchangeable
What about 19?
There are no screws through the grill that need to be removed.
You kinda missed a lot of bolts bro
I just recently knocked my driver side of my bumper out a little
You miss talking about two very important plastic screws on each side of the side connections. That caused me to damage my bumper. You should be banned from giving advice.
I can agree, I ripped my bumper because these two screws were hiding in there, bad information
It's better to delete that shit video, you'll let people destroy their bumper because of that!!! There is 2 screws both sides 8mm to be removed too.
Nope those hold the bracket that doesn’t need to be removed
@@jxlliznbro what..there are 2 screws on each side that go from under the bumper tabs through the bumper bracket . Damn near every single car has a screw of some sort holding the bumper into the bracket , if u don’t take off the screws and take the bumper off you’re going to rip the tabs and not be able to but the bumper back on
@@dannyrod5444no screws go through the bumper cover only a plastic retainer each side. I can post diagrams if you need it
@@jxllizn which screws are you talking about i know there’s 2 that go through the retainer into the fender , but there are also 2 underneath that go through the bumper tab through under the retainer. There are literally 2 holes that are in the bumper tabs made for those screws . Go ahead and show me the diagram i literally had to work on a fusion yesterday
❤😂❤❤❤❤❤❤Waaa❤❤
This doesn’t help at all. Disappointed