Very helpful, I subscribed and liked! I'm struggling to remove the front bumper from my wife's 2019 escape. I really only want to replace the bumper cover, but it seems as though I have to take off the whole assembly (including grill and lower trim pieces etc). Your tip about the 3 torx screws along the bottom was very helpful!
My sister's 2017 had an accident that wrecked the passenger fender by pushing in the edge that has the 3 retainer screws & badly scuffing the front clip on that side. Looking into possibly having a shop but if all the parts are available from a car I saw @ the Pick N Pull might grab the entire front if can get the entire unit cheaply enough as well as the fender (same color). The front comes off easier than I expected. 7 bolts on top...3 on bottom...3 on each side in the fender wells.
Does the wiring loom for the front fog light run along back of bumper from light to light with a single connector on the driver side or are they independent plugs on both sides for each fog light. Thanks
Nice job buddy, is the impact sensors behind the bumper somewhere? I need to change the front right sensor and I can’t see them from above just looking at the front! Thanks
I always wondered if can swap out my 15’ escape front end with one like those and actually they look similar on hardware/installation. Thanks for sharing.
I hate these cars. When I see one coming in the shop, im running away lol. The guy wants me to remove the front bumper to take pictures of damage behind. The thing is that he doesn’t know that I need to remove the whole front end to access the 3 bolts lol. When I’m in a hurry, I just jack the car, remove the corner of the fender trim and loosen the front of the wheel liner,so my air ratchet can go in. Every Ford car or SUV are made like that except some years of Ford Focus 😒
We’ll done video! Excellent step by step. I have a 2017 Ford Escape and this was the only video I could find on this model. Thank you!
Very helpful. My older neighbor has a 2017 and I am going to install new headlamp assemblies. Will grab some trim clips before I start
Thanks for the video. Very helpful and informative. Just removed the bumper of a 2018 Titanium and the video helped a ton.
Very helpful, I subscribed and liked! I'm struggling to remove the front bumper from my wife's 2019 escape. I really only want to replace the bumper cover, but it seems as though I have to take off the whole assembly (including grill and lower trim pieces etc). Your tip about the 3 torx screws along the bottom was very helpful!
Thanks, video saved me a bunch or time replacing splash guard on 2018 escape.
Just wished I would have plugged the lights back in the first time😂
Thank you so much for the video. Helped me a lot on my Kuga. I had the Raptor Grille to install and this video made it very easy.
My sister's 2017 had an accident that wrecked the passenger fender by pushing in the edge that has the 3 retainer screws & badly scuffing the front clip on that side. Looking into possibly having a shop but if all the parts are available from a car I saw @ the Pick N Pull might grab the entire front if can get the entire unit cheaply enough as well as the fender (same color). The front comes off easier than I expected. 7 bolts on top...3 on bottom...3 on each side in the fender wells.
Can you post a video of installing the same bumper?
Does the wiring loom for the front fog light run along back of bumper from light to light with a single connector on the driver side or are they independent plugs on both sides for each fog light. Thanks
Is this generally required to replace the ambient air sensor
Ugh...I wanted to swap my grill out but after seeing this I think I'll just do the black overlay grill kit 😤
Hey thanks for this - saved me a good bit of time and aggravation!
Ojalá todos los videos sean como este, muy bueno
As someone who got in an accident is there any chance you could tell me where the sensors for the airbags are on the Ford escape 2018
What component code have the white clips? I cannot find them😢 please respond. Thank you
Molding Retainer Dorman 963-220
Can you remove the front grill without removing the bumper completely?
Ok my car was hit in an accident. I want to replace the front bumper cover, change the grille to a honey comb. will everything fit properly?
How long to remove driver side fender?
Very informative. well done, many thanks.
Nice capture of steps. I might get that FORD raptor grill and install it?? Thanks
Nice job buddy, is the impact sensors behind the bumper somewhere? I need to change the front right sensor and I can’t see them from above just looking at the front! Thanks
Got it off to replace the radiator and can’t gently the. Cover on correctly
How long does it take to replace a bumper?
I always wondered if can swap out my 15’ escape front end with one like those and actually they look similar on hardware/installation.
Thanks for sharing.
Thanks Scott.
What about front strut on a 2019 Ford escape
Thank you Thank you Thank you your a scholar and a gentleman!
The video I literally needed thank you.
Hey can you tell if it's possible to remove the grill wo removing the bumper? I'm guessing not...
As far as I can tell you cannot without removing the bumper.
Thnx simple and helpful
Any updates on the grey GMC Sierra 1500
I am sad to say that I sold it. I didn't want to, but it was causing too much stress at home with limited driveway space.
Thanks for the info, how do you remove the grill?
Great job, many thanks.
Very helpful video!
thanx needed this
Thank you
Great Video
many thanks !
Maybe you have to change a $20 sensor that the shop quoted you $1000 to do
I hate these cars. When I see one coming in the shop, im running away lol. The guy wants me to remove the front bumper to take pictures of damage behind. The thing is that he doesn’t know that I need to remove the whole front end to access the 3 bolts lol. When I’m in a hurry, I just jack the car, remove the corner of the fender trim and loosen the front of the wheel liner,so my air ratchet can go in. Every Ford car or SUV are made like that except some years of Ford Focus 😒