1- You never go back and forward on a line. You'll get a scar. 2- Never start with the tip or you'll get a blowout. 3-You end with lifting the needle you start same way but viceversa. (pull in, pull out.) if not. you'll have a dot. 4-You tattoo inward so you can see the line and where you are going. This is bad...
Point 1 - There are other ways than just old school traditional methods, there is nothing wrong in doing multi-pass line, it does not scar the skin, if it happens in your case than you are use too heavy machine with a very hard hit or you have a very strong hand over tattooing Point 2 is valid, and that is how it is done in the video, I don’t know why did you raise this concern Point 3 is valid, and that is how it is done in this video, not the otherwise in anyway Point 4 This is personal preference and not a rule, and when it is about the visibility of the needle running through the line, it is absolutely visible and clear for the tattooed. In real life tattooing you can’t expect every line to be pulled inward, your hand has to be dynamic, you must be able to pull a stable line in every direction Thank you for your feedback though, I appreciate the fact that you spent time watching the video and shared your perspective 🙏
@@NushiManuelaAbatchi he’s wrong but he’s not worth lol, this video is also correct . Half of what he said is just personal preference & also based on tattoo, tattoo placement & size. He’s probably never even done anymore than 10 tattoos in his life. Lol probably on all fake skin too.
@@Damienrperry don’t take that advice or your going to fail horribly 💀 stick to what’s comfortable to YOU, there’s 50 different ways to do everything, aslong as it’s safe, proper, accurate & efficient & the art LOOKS GOOD, then do whatever works BEST for YOU.
if the stencil stays for too long on synthetic skin then there is no way that you can wipe it away, it just stays. That's why you want to wipe the stencil after 20mins so it is bearly visible.
My hands shake a bit. I cant draw a straight line if you held a gun to my head. But I love to tattoo. And recommendations for keeping your lines straight with shaky hands
I mean if the stencil stays for 2 long on syntetic sking then there is no way that you would wipe it away, it just stays. That's why you want to wipe the stencil so it is bearly visible
You can buy it doesn’t come off very easily. If you’re applying a stencil to real skin, you should be asking the client straight away if they’re happy with the position. The longer it’s left, the harder it is to remove.
He just ran the stencil already made thru the printer. That epson printer doesn't print stencils it's just a regular color printer from walmart. He's total bullshit
can you please demonstrate how to pull/push a long straight line on fake skin? also show us how to hold the machine for the above technique? many thanks!
I would recommend watching tattooing 101 channel for in depth things. They can teach you how to pull lines on fake skin in one go too. Seen in this video, he has to go over his lines twice to get the lines he looking for.
Is there a way to keep the stencil dark? It's frustrating that it wipes away so easily, also how do you keep the transfer stencils graphite from smearing? These two issues I keep running into Well...while I'm at it, when going back to a tattoo (due to the fact the stencil didn't hold so I did the clear outline only) how do you place the transfer over the original correctly? I know this sounds stupid but everytime I tried to reapply it was just a little off, so more and more transfer paper thrown away and more waiting..
You are using transferpaper where you have to draw over the design right? idk if i understood it correctly, but Use paperclips to fix it. To keep it dark, or at least visible you have to let it dry overnight. Smearing can come from different reasons, either you press to hard, the stencil moves while you are pressing down or when you pull it off. Hope this was helpfull
You can’t place the stencil on the skin and immediately start wiping it, obviously it’s going to smear or wipe away. You didn’t let it sit and dry dude 💀 wtf that’s common sense. When dealing with ink, paint, etc let it tf dry bruh 😂
STENCIL'S READY? IT'S GONE! why does it have to be so light? Everytime I've gotten a tattoo, they leave the stencil the dark blue/purple. Dark... so that they can see it as they trace it. My eyesight is poor, I would be struggling to find the lines if I was tattooing with a stencil that light...
It’s little darker than what you see in this video. On real skin the stencil can be rubbed off but or synthetic skin, darker stencil will not rub off. That is why it has to be light
You put the ointment once you do the lining first it doesn’t make any sense if you put the ointment on the stencil and then erase it. That’s why you put the stencil because you can use it as a guideline.
if the stencil stays for too long on synthetic skin then there is no way that you can wipe it away, it just stays. That's why you want to wipe the stencil after 20mins so it is bearly visible. turn on the audio he's clearly stating why he's doing that.
@@sams7187 that might work for small pieces but with big and detailed ones you just gonna loose the whole thing there’s pieces that you’ll take more than 20 minutes to do. If wiping down the stencil erases it normally you’ll loose it midway and will have to reapply it multiple times besides the stencil will end up completely covered with the ink at the end of the tattoo so what’s the point of erasing it almost completely other than making harder to follow and mess up your work.
Thank you for this vidéo! Some people use green soap to clean the ink on the skin. What would you use, please? PS: just saw your channel 💓 I'm à New subscriber now😁
my friend i always watch your videos its like every day..PLEASE upload a water kiss tutorial on color packing.. imean when you dip the TIP on the water on coloring tattoos .thanks in advance..im your fan in the philippines
Hello Sir, thank you for this very informative video, just one question Sir Sunny, if I buy the full tutorial, is it downloadable? Thank you in advanced sir.
@@SunnyBhanushali thank you for the quick feedback sir, I see that there's two option in your website, monthly subs or buy individually. is it possible to add downloadble option in future? I'm poor and dont have internet in my home, I just renting in computer cafe, which they can allow their customers to download but some owners don't.
Hi, thank u for sharing! May i ask you on which tension do you use for liners? I receive a new machine (sol nova) it will be the first use with a pen so.. Thank you 🙏🏻
Maxi Max hi, so I didn’t not understand your question, are you asking the speed of the machine, like at what volts or hertz you need to run the machine to get good lining, if that is what you are asking for, then specifically for sol nova, slow machine(low volts around 6 to 8) with slow hand movement will give nice clean bold lines. But for any other machine like Cheyenne thunder, you can run it fast(around 8.5 to 11) volts with considerably fast hand movement
SIR I WANT TO ASK ONE❓ QUESTION❔ SIR WHILE LINNING THE INK KEEPS ON SPARKLING OUT OR KEEPS ON POPING OUT OF THE NEEDLE HOOPER WHY SOO . IS THE MACHINE RPM KEPT HIGH OR THE NEEDLE IS VERY MUCH OUT PLS REPLY
The voltage is different for every person and every machine it's about voltage vs hand speed,for rotary start at 6 volts run a line stop and wipe it clean check the line if its bold and clean and crisp that's your lining voltage if not turn it up a volt try again.
Cross contamination. It's real and he practices it here. lol, I really hope he's never tattooed anyone like this .. it would appear he is not aware that safety is BY FAR the most important thing when doing a tat.. that means proper cleaning and sanitizing and etc is the first thing you should be focused on. Hepatitis is real and it is super common disease... And you could easily be spreading it like this guy is doing just with the deodorant alone.
1- You never go back and forward on a line. You'll get a scar.
2- Never start with the tip or you'll get a blowout.
3-You end with lifting the needle you start same way but viceversa. (pull in, pull out.) if not. you'll have a dot.
4-You tattoo inward so you can see the line and where you are going.
This is bad...
Point 1 - There are other ways than just old school traditional methods, there is nothing wrong in doing multi-pass line, it does not scar the skin, if it happens in your case than you are use too heavy machine with a very hard hit or you have a very strong hand over tattooing
Point 2 is valid, and that is how it is done in the video, I don’t know why did you raise this concern
Point 3 is valid, and that is how it is done in this video, not the otherwise in anyway
Point 4 This is personal preference and not a rule, and when it is about the visibility of the needle running through the line, it is absolutely visible and clear for the tattooed. In real life tattooing you can’t expect every line to be pulled inward, your hand has to be dynamic, you must be able to pull a stable line in every direction
Thank you for your feedback though, I appreciate the fact that you spent time watching the video and shared your perspective 🙏
What do you mean with the ‘tip’ at point 2?
Thanks.
@@NushiManuelaAbatchi he’s wrong but he’s not worth lol, this video is also correct . Half of what he said is just personal preference & also based on tattoo, tattoo placement & size. He’s probably never even done anymore than 10 tattoos in his life. Lol probably on all fake skin too.
@@Damienrperry don’t take that advice or your going to fail horribly 💀 stick to what’s comfortable to YOU, there’s 50 different ways to do everything, aslong as it’s safe, proper, accurate & efficient & the art LOOKS GOOD, then do whatever works BEST for YOU.
now we have the stencil ready, nothing there lol
yeah! ahaha
if the stencil stays for too long on synthetic skin then there is no way that you can wipe it away, it just stays. That's why you want to wipe the stencil after 20mins so it is bearly visible.
@@sams7187 no way? It just stays? Bullshit, it's alcohol soluble.
Edit: you said on synthetic skin... Lolz ok. Idk bout that, I mostly used real skin.
@@AdamA-wg1ko glad it made you laugh my friend have a good one 👍🏼
Stencil has left the chat
this is senddding me
I am hollering 😭😭😭😭
lma9
🤣🤣🤣🤣🤣
2:39 I CAN SEE ITS NOT VERY DARK
Great tutorial... Please make sure to give a needle perspective/view so it is easier to understand the technique used visually.
Usman bin akram sure, we will consider your request and implement it from the next video
My hands shake a bit. I cant draw a straight line if you held a gun to my head. But I love to tattoo. And recommendations for keeping your lines straight with shaky hands
You got to practice, through repetition you will train your mind to muscle coordination and get better at it
I mean if the stencil stays for 2 long on syntetic sking then there is no way that you would wipe it away, it just stays. That's why you want to wipe the stencil so it is bearly visible
Not true you can take off stencils jus by cleaning it with water and soap or even Vaseline
You can buy it doesn’t come off very easily.
If you’re applying a stencil to real skin, you should be asking the client straight away if they’re happy with the position.
The longer it’s left, the harder it is to remove.
sir ek basic course ka tuturial bna du step wise. machine ka process (shading technique class)
I like the way you break it down for better understanding
:)
Hi bhaiya necklaces ko ja rahe kaun sa tattoo machine painless achcha lagega please mujhe bataiye
He removed the whole stencil lmfao 🤣 😂😂😂😂
I just subscribed, you've been the only person that demonstrates and explains the different textures, long, and shading.
Kristine Angelique thank you 🙏🏻
Hello sir!!
For a very perfect line ,straight and fine , how you stay in position with your hand?
I prefear to sit my hand straight for a thin line.
great...for synthetic skin..
Where can I bout the fake skin he is using. I bought some off Amazon and they’re okay but too thin (1cm). Can someone please help me out. Thank you
hello. What do you think is the best pen for tracing? thank you. A French fan peace
Any ball pen with .5 point is good to go, you can also use graphite pencil (3H) for the same :)
@@SunnyBhanushali thanks
Thank you thank you thank you sir.
Thanks for this video.
Very knowledgeable video.
Once again thanks a lot sir for this video.
You are welcome
Sir can you tell me..wich is better for tattoo studing,tattoo coill machine or tattoo pen
Our preference is tattoo pen (rotary machine)
Sir mujhe ye synthetic skin leni hai kaha se lu
Which needle did u use??
what kind of printer stencil do you use?
thank you! which brand and type machine you use?
Cheyenne thunder and spirit
What do you call that yellow for tatoo practices
Can u tell me where to buy that printer or what printer do u recommend thank u
He just ran the stencil already made thru the printer. That epson printer doesn't print stencils it's just a regular color printer from walmart. He's total bullshit
@@Arguematic he applied it wrong too if this were on actual flesh rubbing it like that would smudge the shit out of it
sir low price me kon sa printer best rahe ga tattoo stincil ke liye
Perfect knowledge! Perfect!! Answer to those ques are found here.. perfect knowledge!
Thank you
can you please demonstrate how to pull/push a long straight line on fake skin? also show us how to hold the machine for the above technique? many thanks!
I would recommend watching tattooing 101 channel for in depth things. They can teach you how to pull lines on fake skin in one go too. Seen in this video, he has to go over his lines twice to get the lines he looking for.
I want the tatu making machine
Link for bay
How to make stencill by using printer
That what I’ve been trying to learn the proper way to start from
did you use printer to trace the stencil? how?
This instrumental is 🔥 can I have a name?
did you print the design on the stencil paper?
Is there a way to keep the stencil dark? It's frustrating that it wipes away so easily, also how do you keep the transfer stencils graphite from smearing?
These two issues I keep running into
Well...while I'm at it, when going back to a tattoo (due to the fact the stencil didn't hold so I did the clear outline only) how do you place the transfer over the original correctly? I know this sounds stupid but everytime I tried to reapply it was just a little off, so more and more transfer paper thrown away and more waiting..
You are using transferpaper where you have to draw over the design right? idk if i understood it correctly, but Use paperclips to fix it.
To keep it dark, or at least visible you have to let it dry overnight.
Smearing can come from different reasons, either you press to hard, the stencil moves while you are pressing down or when you pull it off. Hope this was helpfull
You have to let it sit on the skin for atleast 15 to 20 minutes
You can’t place the stencil on the skin and immediately start wiping it, obviously it’s going to smear or wipe away. You didn’t let it sit and dry dude 💀 wtf that’s common sense. When dealing with ink, paint, etc let it tf dry bruh 😂
What is the voltage ur using for putting line on normal skin
STENCIL'S READY?
IT'S GONE!
why does it have to be so light? Everytime I've gotten a tattoo, they leave the stencil the dark blue/purple. Dark... so that they can see it as they trace it.
My eyesight is poor, I would be struggling to find the lines if I was tattooing with a stencil that light...
It’s little darker than what you see in this video. On real skin the stencil can be rubbed off but or synthetic skin, darker stencil will not rub off. That is why it has to be light
You put the ointment once you do the lining first it doesn’t make any sense if you put the ointment on the stencil and then erase it. That’s why you put the stencil because you can use it as a guideline.
Please bro this body deodorant can brut spray work,incase I don't find the creme
Sir I m using traditional needle. which brand traditional needle is best in Indian market
How often can I go over a line on human skin?
Does anyone knows where I can buy this thicker skin? Amazon eBay or any else? I can’t find with this thickness only a skinny one like 1mm
World wide tattoo supply. “A pound of flesh” is one brand also.
put tissue underneath....or foam ....or sponge
Which machine ur using to this tattoo
Lol 😂 he erased the whole stencil basically you can barely see it
if the stencil stays for too long on synthetic skin then there is no way that you can wipe it away, it just stays. That's why you want to wipe the stencil after 20mins so it is bearly visible.
turn on the audio he's clearly stating why he's doing that.
@@sams7187 that might work for small pieces but with big and detailed ones you just gonna loose the whole thing there’s pieces that you’ll take more than 20 minutes to do. If wiping down the stencil erases it normally you’ll loose it midway and will have to reapply it multiple times besides the stencil will end up completely covered with the ink at the end of the tattoo so what’s the point of erasing it almost completely other than making harder to follow and mess up your work.
Thankyou sir best tutorial classes 🙏🏼
Thank you, I am glad that you liked it
What program do you use to make patterns or stincels
Adobe Illustrator and Photoshop
You are so amazing! And such an incredible teacher. Thank you so much for this!! 🖤
Anica Jansen van Vuuren thank you
You must be his wife lol
Does Brut work on real skin???
Tutorial 4 stencil??
What is the brand of the printer that you use with stencil copier
so you just wipe with a dry paper towel?
Yes
Thank you for this vidéo! Some people use green soap to clean the ink on the skin. What would you use, please?
PS: just saw your channel 💓 I'm à New subscriber now😁
Green soap is good, but use it to the minimum, use enough A&D or any similar product to keep your tattoo clean
Hye...what printer do u use for the stencil plss
my friend i always watch your videos its like every day..PLEASE upload a water kiss tutorial on color packing.. imean when you dip the TIP on the water on coloring tattoos .thanks in advance..im your fan in the philippines
in famous thank you, I will surely cover your request in one of my upcoming videos
@@SunnyBhanushali im so happy you saw my comment..thank you so much godbless you sunny
@@smoothshades2123 sunny side up on phillipines!
Hello Sir, thank you for this very informative video, just one question Sir Sunny, if I buy the full tutorial, is it downloadable? Thank you in advanced sir.
Son Of GOD thank you, I am glad you liked it, it’s a monthly subscription where you can access all the videos at $39
@@SunnyBhanushali thank you for the quick feedback sir, I see that there's two option in your website, monthly subs or buy individually. is it possible to add downloadble option in future? I'm poor and dont have internet in my home, I just renting in computer cafe, which they can allow their customers to download but some owners don't.
You passed 3 times the same line..doesnt that hurt the real skin?
Superb
What is the material you using for the false skin? :D
How manny volts are you on my like look like a bunch of dots
For practicing realistic or portrait (detailed work) tattoo,does the stenciling processr emain same on synthetic skin?
Yes
Hi, thank u for sharing! May i ask you on which tension do you use for liners? I receive a new machine (sol nova) it will be the first use with a pen so..
Thank you 🙏🏻
Maxi Max hi, so I didn’t not understand your question, are you asking the speed of the machine, like at what volts or hertz you need to run the machine to get good lining, if that is what you are asking for, then specifically for sol nova, slow machine(low volts around 6 to 8) with slow hand movement will give nice clean bold lines. But for any other machine like Cheyenne thunder, you can run it fast(around 8.5 to 11) volts with considerably fast hand movement
SIR I WANT TO ASK ONE❓ QUESTION❔ SIR WHILE LINNING THE INK KEEPS ON SPARKLING OUT OR KEEPS ON POPING OUT OF THE NEEDLE HOOPER WHY SOO . IS THE MACHINE RPM KEPT HIGH OR THE NEEDLE IS VERY MUCH OUT
PLS REPLY
Just dip it into paper towel to reduce the amount of ink in the hopper. A full hopper will always splatter.
@@Mark-el4hp OOO HOO YES FOR UR ADVICE N THANKS FOR REPLYING 👍 GOD BLESS YOU 👍🙏
Thanks frend
Very helpful tutorial and very empormatuve
Thank you 🙏🏻
what kind of printer you used?
Where can i get f7 cartridges for dermapen? Can u suggest any seller/site?
World tattoo supplies
@@masonwarner1372 can u plz provide link...i hv to see if they supply in india... Thank you
What is ND Ointment?!
It’s vitamin A and D Oinment
@@SunnyBhanushali
I know everything about "A&D Ointment", but I heard "ND Ointment" in video!
Thanks.
Thank you sr is video k liye sr ase he or basic videos uplod krna please
How parts missing
Sir can you please tell me where is your classes
Mumbai
Thank you for this video.
What will be the voltage using while doing lineing
The voltage is different for every person and every machine it's about voltage vs hand speed,for rotary start at 6 volts run a line stop and wipe it clean check the line if its bold and clean and crisp that's your lining voltage if not turn it up a volt try again.
I’m still trying to figure out the line work
Where are you from?
what is that printer brand?? I am interested
What speed do u recommend for shading
thats a answer nobody can give you. slower voltage = slower handspeed, and higher voltage, = faster voltage.
Yes lol the speed is yes
thanks bro
Nyz video tankz for that
which tattoo machine is this?
sam ghouri Cheyenne Thunder
Sunny Bhanushali thanks sir
Sir ap kider se hooo
Very nice vidio
Everyone I know uses gel deodorant it’s common but they say it’s not sanitary
Cross contamination. It's real and he practices it here. lol, I really hope he's never tattooed anyone like this .. it would appear he is not aware that safety is BY FAR the most important thing when doing a tat.. that means proper cleaning and sanitizing and etc is the first thing you should be focused on. Hepatitis is real and it is super common disease... And you could easily be spreading it like this guy is doing just with the deodorant alone.
Dommage pas de traduction en français
What kind of lotus is that ?
This is a really good video! Thanks for uploading
Sir plz make a video on tattoo needle deepness
Hi.. may i know what size needle u using ?
Pay attention to the video he says it at the beginning
Really help full sir
Muje aspe sikhna hai tattoo work
Ranjit Singh aap 9833065290 pe phone karo
Which stroke do you prefer at this technique?
longer strokes = better for lineing.
Thanks for everything sir
thank you you do great job, also in your other videos💙🙆🏽♀️
There is any alternative for ' Brut deodorant stick ' .
proper stencil transfer solution like stencil stuff
stencil should be left on 2-4hrs
You start and stop 3 times each small line
Ad making the stencil barely able to be seen making it useless
Not useless, it is enough visible to tattoo on it :), maybe not through camera but in real it is
I'm changing up my technique thanks to you.
Can u teaching me
I use petroleum jelly
Nis
There is no stencil
Amazing!!!
👏👏👏👏