Limited sponsorship for Newest LED Bulbs Testing Provided. Don't hesitate to contact us to grab this opportunity. 1. Contact email: youtube@lasfit.com 2. Please tell us your vehicle make, model and year
Do you have to have some kind of conversion kit from the factory hid lights to led?..because my power connector is different than the connection on the led bulbs
Hi guys. the upgraded version H11 LED bulbs perfectly fit Lexus IS250 2006-2015 with halogen headlight bulbs: bit.ly/32JEaZl If your OEM headlights are HID bulbs, you need to buy D4S LED bulbs
I have a 2014 Lexus LX570 with HID bulbs. I ordered the LAplusD2. I don't understand how to install these. They are not plug and play. The Lexus has a dust cover that contains what looks like a a computer. The HID runs power from the inside of the dust cover, with no plug. I received extra plugs with the Lasfit LEDS that have pig tails. Sorry, I'm lost here - can you advice?
OK I see now - it would require me to drill the dust cover or light casing and run the pig tails directly to the outside plug. I will think about returning the LEDs and keep the HID in place. These are not plug and play. Please post a video showing a similar installation.
The high beam bulb size is 9005 for your 07 Lexus IS250, here is the link: www.lasfit.com/products/9005-hb3-led-headlight-high-beam-la-series?Social&YTB%20Channel&LAplus9005
My wife has same car and it has aftermarket hid kit from years ago... Isn't this considered a projector lens and should have a hid or is LED a good alternative? I've read that projector lenses work better with his in them. Thank you
Hi Dan, to answer your question. HID & LED bulbs work best with projector lenses. The only difference between the two is the HID bulbs are brighter but the LED bulbs last longer.
As far as I am aware the low beam consist of two bulbs. Is the little one in the corner a 9005 bulb? It looks strange having one LED and one still a yellowish halogen color.
The problem with installing there type of LED lights is that over time moisture will get into the inside of the light housing because it's not firmly sealed and you can't put the cover back on.
Hello, for some vehicles, the headlight housing is not big enough to hold the LED bulb and the OEM dust cover can't be put back on. You can consider to replace the OEM dust cover with an extended rubber dust cover, or drill a hole on the OEM dust cover that the LED bulb could through it, then the dust cover will be put back.
@@guerratiburon The front and rear blinker bulb both are 7440, here is the link: www.lasfit.com/products/lasfit-7440-7441-w21w-led-turn-signal-lights-canbus-error-free?Social&YTB%20Channel&T-7440A
We carry LED bulbs to replace original HID D4S bulbs, but it is a universal plug, maybe not direct plug and play for your car. But it is not hard to connect the power cable, just find 2 wires "+" & "-" from your original power cable, then "+" to "+", "-" to "-". Here is the link of LED bulb D4S: bit.ly/2FvrvgK
should have shown how to "remove a lot of stuff". been looking for a video and found yours but it'd have been nice if you had showed how to remove the air intake stuff
Hi, we haven't get the chance to shoot a video step by step from start to finish to show how to replace the bulb on Lexus IS250. Are you willing to do a detailed video and share it with us? We are now holding a sponsorship program that aims to collect some product video reviews from our customers, if you are interested in this event, please fill out the form first: www.lasfit.com/pages/syle-video-program?Social&YTB+Channel&SYLE and then I would like to send you more details regarding this program.
Hi, these H11 LED bulbs are used to replace OEM halogen headlight bulbs. We also carry LED bulbs to replace OEM HID headlight bulbs. What's your car make, model and year? Is the OEM headlight HID or halogen?
@@lasfitvehiclelife 2007 IS300, Xenon D4S HID. Each year one goes bad (driver side) and I have to change it. Probably it is the ballast going bad but it is far from cheap if found alone! I am planning for a LED replacement for the bulb only....
@@Heizenberg. We have LED bulbs to replace OEM Xenon D4S bulbs. But it's not plug and play, you need to modify the power cable. Click this link for more information: www.lasfit.com/collections/d2/products/lasfit-d2s-d2c-d2r-d4s-d4-led-headlight-bulb-hid-xenon-replacement-philips-chip?Social&YTB%20Channel&LAD2
Hi, did you meet any problems? Please contact our customer service for support. LASFIT provides 1 year hassle free warranty and 45 days money back guarantee.
Limited sponsorship for Newest LED Bulbs Testing Provided.
Don't hesitate to contact us to grab this opportunity.
1. Contact email: youtube@lasfit.com
2. Please tell us your vehicle make, model and year
How does that bulb fit flush into the light housing and is it held down exactly the same with the locking clips....like the stock HID bulbs?
Does this flicker if installed on a 2010 Lexus IS 250 with HID Headlight AFS? I try other brand and they flicker.
Your factory headlights are HID, right?
Do you have to have some kind of conversion kit from the factory hid lights to led?..because my power connector is different than the connection on the led bulbs
Yes, we have LED bulbs to replace OEM HID bulbs. What's your vehicle make, model and year?
Does that fit the 2007 Lexus IS250
Hi guys. the upgraded version H11 LED bulbs perfectly fit Lexus IS250 2006-2015 with halogen headlight bulbs: bit.ly/32JEaZl
If your OEM headlights are HID bulbs, you need to buy D4S LED bulbs
I have a 2014 Lexus LX570 with HID bulbs. I ordered the LAplusD2. I don't understand how to install these. They are not plug and play. The Lexus has a dust cover that contains what looks like a a computer. The HID runs power from the inside of the dust cover, with no plug. I received extra plugs with the Lasfit LEDS that have pig tails. Sorry, I'm lost here - can you advice?
OK I see now - it would require me to drill the dust cover or light casing and run the pig tails directly to the outside plug. I will think about returning the LEDs and keep the HID in place. These are not plug and play. Please post a video showing a similar installation.
How do the bulbs come out from the housing
How many years did it last.
Which bulbs fit the 07 is250 high beam?
The high beam bulb size is 9005 for your 07 Lexus IS250, here is the link:
www.lasfit.com/products/9005-hb3-led-headlight-high-beam-la-series?Social&YTB%20Channel&LAplus9005
Did you put the headlight door back?
any errors code after installing led bulbs
No error code. May I know your vehicle make, model , trim and year?
@@lasfitvehiclelife 2009 lexus is250..
Very helpful. Thanks
My wife has same car and it has aftermarket hid kit from years ago... Isn't this considered a projector lens and should have a hid or is LED a good alternative? I've read that projector lenses work better with his in them. Thank you
Hi Dan, to answer your question. HID & LED bulbs work best with projector lenses. The only difference between the two is the HID bulbs are brighter but the LED bulbs last longer.
👍
The brightness has something to do with the power/lumens/lux. 🙂
Can u change your DRL to LED? I don’t like the stock yellowish ones.
Will this bulb fit in the housing for the H11 and 9005. Since they have covers on
As far as I am aware the low beam consist of two bulbs. Is the little one in the corner a 9005 bulb? It looks strange having one LED and one still a yellowish halogen color.
The bulb next to the low beam is high beam, 9005.
Do these still work on the IS models with the dynamic projectors? The ones that swivel when you turn?
Please check the bulb size of your dynamic projectors. If the bulb size is H11/H9/H8, then these work on it
Thanks to u me and my son did it!
GREAT TUTORIAL!!!
Thank you
Glad it was helpful!🙂
Lasfit la or lc6 series what's the difference?
LA series: 36W, 3800LM, 6000K per bulb, COB chips
LC6 series: 30W, 3800LM, 6000K per bulb, flip chips
The problem with installing there type of LED lights is that over time moisture will get into the inside of the light housing because it's not firmly sealed and you can't put the cover back on.
Hello, for some vehicles, the headlight housing is not big enough to hold the LED bulb and the OEM dust cover can't be put back on.
You can consider to replace the OEM dust cover with an extended rubber dust cover, or drill a hole on the OEM dust cover that the LED bulb could through it, then the dust cover will be put back.
What number is the blinker bulb
Hi, what's your vehicle make, model and year?
@@lasfitvehiclelife 07 IS250 Lexus
@@guerratiburon The front and rear blinker bulb both are 7440, here is the link:
www.lasfit.com/products/lasfit-7440-7441-w21w-led-turn-signal-lights-canbus-error-free?Social&YTB%20Channel&T-7440A
Thank you for the video. If the low beam has d4s bulbs, how may we upgrade with aftermarket led or HID. I need some advice on thst please.
We carry LED bulbs to replace original HID D4S bulbs, but it is a universal plug, maybe not direct plug and play for your car. But it is not hard to connect the power cable, just find 2 wires "+" & "-" from your original power cable, then "+" to "+", "-" to "-". Here is the link of LED bulb D4S:
bit.ly/2FvrvgK
Thanks a lot!
are these 5K or 6K LED lights? this is for a Halogen set or HID?
These LED lights are 6000K, and this is for halogen bulb
I dont have that type of connection on my 2008 IS250 its a D4S connection. How can I connect these H11 headlights to that??
You can't bulbs that fit in is250: high beam HB3 , low beam H11 and if HID bulbs fitted low/high beam D4S and these got higher voltage.
Was there enough room to put the dust covers back on? You left out the reassembly. What is the height of the heatsink? Thanks in advance
should have shown how to "remove a lot of stuff". been looking for a video and found yours but it'd have been nice if you had showed how to remove the air intake stuff
Hi, thanks for your suggestions. We'll show mode details about the installation steps in our new videos. What's year of your Lexus IS250?
@@lasfitvehiclelife 09 is250
It would of been more better for us to learn if you showed us step by step from start to finish
Hi, we haven't get the chance to shoot a video step by step from start to finish to show how to replace the bulb on Lexus IS250.
Are you willing to do a detailed video and share it with us?
We are now holding a sponsorship program that aims to collect some product video reviews from our customers, if you are interested in this event, please fill out the form first: www.lasfit.com/pages/syle-video-program?Social&YTB+Channel&SYLE
and then I would like to send you more details regarding this program.
What is the bulb size for high beams?
What's the year of your Lexus IS250? We'll check the high beam bulb size for you.
@@lasfitvehiclelife 2008
would be better to see night comparison
Thanks for sharing. Maybe you should be a little bit more caredful not to touch the lamp with bare hands :)
Yor oem bulbs are not xenon, so no ballast to be removed and no adhoc circuitry!
Hi, these H11 LED bulbs are used to replace OEM halogen headlight bulbs. We also carry LED bulbs to replace OEM HID headlight bulbs. What's your car make, model and year? Is the OEM headlight HID or halogen?
@@lasfitvehiclelife 2007 IS300, Xenon D4S HID. Each year one goes bad (driver side) and I have to change it. Probably it is the ballast going bad but it is far from cheap if found alone! I am planning for a LED replacement for the bulb only....
@@Heizenberg. We have LED bulbs to replace OEM Xenon D4S bulbs. But it's not plug and play, you need to modify the power cable. Click this link for more information:
www.lasfit.com/collections/d2/products/lasfit-d2s-d2c-d2r-d4s-d4-led-headlight-bulb-hid-xenon-replacement-philips-chip?Social&YTB%20Channel&LAD2
Fuck a is I drive GG350
Same motor but weighs less. It’ll outrun you. Be careful lol
LC6 series h11 lasfit ridicules waste a money
Hi, did you meet any problems? Please contact our customer service for support. LASFIT provides 1 year hassle free warranty and 45 days money back guarantee.