How to Add text to A Model in Meshmixer

Поделиться
HTML-код
  • Опубликовано: 22 дек 2024
  • How to Add Text in Meshmixer
    In this video, I show you a simple way to add text to a model. Text can be the patients name, the date the model was taken, the aligner number (eg 2 of 4), an office logo, a filing area, etc.
    If you are printing models in your office, don't use a sharpie! Emboss or deboss text. It's really easy and only needs a few steps.
    You can do this on a Mac or PC.
    I hope the video is helpful. Leave questions or comments below.
    ===============
    Thanks for following our channel!
    ==========================
    Are you an orthodontist interested in providing your patients with easy online access to their retainers? Go to partners.retai... to learn more
    Retainer Club is the only lab that give you FREE clear retainers! Saving you overhead from day 1.
    Check out my video on how to add a pontic in Meshmixer
    • How to add a Pontic To... ​
    =================
    **Click Below to Subscribe for More Videos
    www.youtube.co...
    ===============
    Blair Feldman DMD, MS, MSEd
    The 3D Orthodontist
    Cofounder of Retainer Club www.retainerclub.com
    =================
    **Click Below to Subscribe for More Videos
    / @3dorthodontist

Комментарии • 39

  • @cynthiaguzman2823
    @cynthiaguzman2823 5 лет назад +13

    I'm not a dentist but this is exactly what I was looking for! Thank you very much

    • @thegamethemovie9605
      @thegamethemovie9605 2 года назад +1

      I'm not a dentist either, but this is a cool technique!

  • @andrewroberts4599
    @andrewroberts4599 5 лет назад +10

    Great video! your method works well. Another way to accomplish the remesh is to use make solid. It works for all surfaces.
    edit>remesh>make solid.
    Turn the solid accuracy and the mesh density all the way up and your entire model will be remeshed. This will allow you put text on any surface, even curved surfaces.
    Note: If the model is large it can take a few minutes to calculate.

  • @carlopadillo7904
    @carlopadillo7904 4 года назад +1

    I would like to thank you for a wonderful and clear explanation on how to do the embossing on Meshmixer. Before I saw your video I've got a weird result. What I've been missing is the process of "remeshing" the area where I want to place the emboss. Now I'm happy for the good result.

  • @wakeupworkout7781
    @wakeupworkout7781 4 года назад +7

    Make sure you follow the bit about the refinement section at 5:06! 100-0-100-100 for the 4 bars, the "refine" bar being at 100 is the most important!

  • @ryanfitzgerald5904
    @ryanfitzgerald5904 4 года назад +2

    how did you flatten the 2 surfaces initially, and how did you make both surfaces different colors? Just started using this software thanks.

  • @MrPashee
    @MrPashee 5 лет назад +4

    Man, this is dope! Great video! You've saved me hours of life!

  • @robertovillalobos51
    @robertovillalobos51 3 года назад +1

    Thanks my friend, just what i was looking

  • @LeandroOsorioOrtodontia
    @LeandroOsorioOrtodontia 4 года назад +1

    Great video!!! Thanks for your clear and direct explanation..

  • @ebahns
    @ebahns 3 года назад +3

    Thank you for taking the time to explain how this is done. You're video was very helpful to me. On a side note, I followed your directions and settings. When I add the stencil I have created which is just a name, it does not add it to the image. It looks like a few bumps. If i keep left clicking, I start to see the name but the more I click it looks like spikes or mountains...Not sure what is going on

  • @VirtualshopX
    @VirtualshopX 4 года назад +2

    You can also use 3D paint ,there you can make from 2D a 3D image and import as a obj in meshmixer.

  • @Duckers_McQuack
    @Duckers_McQuack 3 года назад +2

    Didn't work. I imported the stensil text pattern, but no text got stamped, just a circle bump., and the elected area i did went away once i clicked sculpt.

  • @ClearMindJewellery
    @ClearMindJewellery 6 лет назад

    We working on debossing on a ring and getting an embossing on the opposite side (inside of the band) by accident. Is there something we can do in the settings for hollow objects.

  • @josemedina01
    @josemedina01 3 года назад

    How did you remesh so fast? Do you have a lot of memory or just a powerful machine?

  • @kirbynelson4451
    @kirbynelson4451 4 года назад

    Can you emboss the names on the bottom of the model? there is a lot more room and won't interfere with the retainer / aligner

  • @LIONY325
    @LIONY325 4 года назад

    Hi, can I ask why I add text emobss way, the text extrude out in another side?

  • @Potato_Playz_Nothing
    @Potato_Playz_Nothing 2 года назад

    When I try to add the text I just get a blank square, any advice?

  • @hyperespy3044
    @hyperespy3044 3 года назад

    came across issues it says draw a loop of curves to remesh. have no idea how to do it

  • @joshbryant8929
    @joshbryant8929 4 года назад

    Is there a way to make the text come outwards rather than inwards

  • @Sejin_Song
    @Sejin_Song 3 года назад

    Great! Thanks!

  • @deborahortiz432
    @deborahortiz432 3 года назад

    What program do you recommend for MacBooks since Paint is not available?

  • @rickhill3177
    @rickhill3177 Год назад

    This doesn't work for me. When I add the object, Meshmixer just prints a square shaped blob on the model.

  • @Dr.kc.Gowtham.mds-prostho
    @Dr.kc.Gowtham.mds-prostho 6 месяцев назад

    Superb sir🎉

  • @computerpro6829
    @computerpro6829 5 лет назад +1

    cool, nice stuff, thanks

  • @rahmikarajeh
    @rahmikarajeh 6 лет назад +5

    For mac it's Command+Left click for deboss

    • @bachdaddy8683
      @bachdaddy8683 4 года назад

      i cannot get it to work and my model is already solid.. any thoughts?i need helppp lol

  • @masulsa40
    @masulsa40 4 года назад +1

    awesome!

  • @adamnichols476
    @adamnichols476 7 месяцев назад

    I want to do it in mesh mixer. Not have to import garbage.

  • @edwardlyles1098
    @edwardlyles1098 3 года назад

    Isnt working for me. I load the stencil and press the left button and nothing.

  • @j.e.711
    @j.e.711 5 лет назад

    Great video.
    Will it also be possible to add vector files like a chip carving pattern to a curved stl-file?

  • @ebahns
    @ebahns 3 года назад

    If you click on my name, you can view the video I have uploaded to youtube. It shows the trouble I am having. Not sure if you can offer any advice as to what may be going wrong. Thank you

  • @goolowjon
    @goolowjon 5 лет назад +4

    An easier way is to make the label on Tinkercad, export it as STL, and just join it to the model. Need to transform, and move it and scale it. A lot less steps.

  • @clanggedin
    @clanggedin 5 лет назад +1

    I would suggest getting a pop filter for your mic. It will help with the "P" not overmodulating and sounding so harsh.

  • @lorenzovolpe107
    @lorenzovolpe107 4 года назад

    uff. non mi carica il file .png

  • @4funrc11
    @4funrc11 5 лет назад +1

    Hey, :) Thx.

  • @drummerhammar
    @drummerhammar 2 года назад

    Easy on a flat surface, not so easy on a curved surface.

  • @youngman850
    @youngman850 2 года назад

    i SUBRSCRIBBLE