YESWELDER Cut-55DS Plasma Cutter - Will It Live Up To The Hype?
HTML-код
- Опубликовано: 2 авг 2024
- RV Gate Build-- • RV Gate Rebuild | Add...
Vulcan Omnipro 220 Review-- • Harbor Freight + Home ...
Vulcan Omnipro 220 Tig Upgrade-- • Vulcan + CK Worldwide ...
I’ve wanted a plasma cutter for years now. I know you “can” cut sheet metal with a cut off wheel, but I’ve not yet perfected that method. As plasma cutters have gotten less expensive I’ve saved up and decided to take a risk on a “cheap” unit. The YESWELDER Cut-55DS. After a few practice cuts and completing my gate build I am impressed!
Products/Affiliate links: Help me out by purchasing from a link. It helps keep the videos going.
[As an Amazon Associate I earn from qualifying purchases at no cost to you.]
Direct link to my Amazon Store- www.amazon.com/shop/drivingfo...
YESWELDER Cut 55DS-amzn.to/3qoyORv
Welding Extension Cord- amzn.to/3WPKBV4
Air Compressor Desiccant Dryer-amzn.to/3IVSaDN
Desiccant Beads- amzn.to/3MO1GKy
Air Compressor Filter-amzn.to/3MLQVIB
Here's a link to eBay if you like shopping there better- www.ebay.com/itm/314576195650... &mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5338990870&customid=&toolid=10001&mkevt=1
Video Equipment-
Iphone 14pro
DJI Osmo 6- amzn.to/3W5bsLd
DJI Mic- amzn.to/3UO1XPp
Tripod- amzn.to/3FEynYq
Video Lighting- GVM 800D with stand-amzn.to/45LmLxJ
Moment IPhone Case-amzn.to/43msqZp
Phone Tripod Mount- amzn.to/3N8DSSO
Looking for a Dash Cam for your car? Save 5% on purchases over $100 with my link:
blackboxmycar.com?ref:Driving_Forward_Builds
Editing Software-
Davinci Resolve Studio 18.5
Editing Talent-
Almost none. Hope to build that with time :-)
TAGS- YESWELDER, YESWELDER Cut 55DS, Plasma Cutter #plasmacutter #yeswelder #welder #welderlife
Side note- This DIY is not intended as instructional content. It is merely entertainment for you to do what you wish with. I’m just a guy with an awesome beard playing in his garage. 
Хобби
Terrific, practical review. I too had budget issues when I bought this and have zero regrets. I had a small issue with the regulator valve which Yes promptly responded by sending me another. I do recommend however, making sure that your air supply is as dry as it can be using an in line water separator.
For sure on the dry air. That's why I'm running the additional filter and dryer on my system. I hope to prevent any damage that would come from water in the line.
Great review and tests. Thank you for that!
You bet. Thanks for the comment. It really helps.
@@DrivingForwardBuilds You're welcome. I appreciate a youtuber that actually responds to comments/questions. FYI that based on your useful review (along with some others that I have watched), I bought this Cut-55DS today. It's on an amazing sale right now for only $199 and I figure you really beat that. Thanks again
@@utrutr6013 That's awesome. I like my machine so far and hope yours does exactly what your'e looking for.
Thanks for the review. I've been considering buying one but was concerned it wouldn't be strong enough.
No problem 👍
Mine started making a loud buzzing noise only while cutting. Ive only used it twice pretty sure my warranty is up. Any ideas sir
So far mine isn't making any noise, at least different than at initial startup? Perhaps something inside came loose and is vibrating against the case?
how big of compressor do you need
I’m using a 10 year old 30 gallon 110v unit. Really you don’t need a lot of pressure. Max you’re running 50psi. As far as volume you can cut then wait for the compressor to catch up.
Did you find any damage with the way Amazon ships it?
Thankfully no. The plasma cutter was well protected inside it’s primary box.
Just like a welder, that pretty light emitted from the cutter can kill you. What's with the short sleeves?
I was not aware that the arc was as potent as a weld arc. Especially given the arc is shielded by the work piece for much of the cut. That and the shade lens used for cutting is so much less than welding. I’ll have to look into it. Thanks for the insight.
@@DrivingForwardBuilds
It is lower but damage is accumulative. If you are using 40+ amps, it's emitting a lot of energy . People who are exposed to sun rays do not react the same and this is the same situation.
@@thomcarr7021 Got it. Thanks for the info. PPE is a battle when it's 100* + in the garage, but I need to work harder on it.