Phantastisch,was du aus Schrottholz basteln kannst. Respekt! Unglaublich, was die 22mm Stahlkugeln für eine Trefferwirkung haben. Das möchte keiner abbekommen.....👍
This and your repeating blowgun proof of concept video are the kinds of things that brought me to your channel. I love your ideas and builds. I'm delighted to see you doing this stuff again.
There is a certain measure of joy in your laughter that is higher when you build and use a slingshot versus all your other videos. I've really missed this, Joerg. Thanks for bringing it back.
Finally a good ol fashioned video Fun to see the shooting edit! Keep it raw as is! Oh I would love to see you put on some keyboard key tops (the thin bone plates) on a slingshot, making it high class luxury
Slingshot ..... yeah Joerg we love it and happy to see a build again. Honestly you keep me watching just by being you but love the builds and inventions best !
Welcome home slingshot man. It is good not to forget basic skills even so you are making spaceships in archery. During all those years you have made a lot of slingshot's and this is your way to tell the people that they can make slingshot in survival situation too from nothing and with minimal knowledge and tools. I saw an wood finish made from lime soaked in water and brushed on the wood. After scratching off lime from the wood, wood had beautiful reddish colour. Also rubbing wax in the wood makes brownish finish, and it's darker with more rubbing. But you should make tests on a scrap wood and then make a choice. I used once simple commercial black wood colouring by dipping wood into can, and after that oil varnish. It ended great.
Nice build and tutorial! Appreciate all your builds but the slingshots ones remind me of hanging out with the lads and talking about the insane things you fired - the good old days! Followed you channel for over a decade now. Remember the first video I watched, you fired a slingshot that was "H" shaped. Anyways, thanks for the trip down memory lane. Stay safe big man👍
Yeah. I stumbled randomly on the original forum when it started. Was great. One of the very few forums that people were nice and supportive of each other on. Haven't been back there in a very long time and this reminds me a should go check it out if it still exists!😁👍
This is the Joerg I like!! Making beautiful and functional slingshots, with raw and bestial bandsets!! Awesome!! From 9:44 to 12:00 I laughed so hard!!! Your videos are always inspiring and funny. Keep it up!! 👍👍👍👍👍👍
Drückt Jörg irgendwas in die Hand, und er baut eine Waffe daraus. Welch göttliche Gabe, danke daß du sie mit uns teilst. 👍👍Drei Daumen nach oben aus DK 🇩🇰
Gotta love these simple slingshot making videos, just like the good old days, not that the present days are bad thats not my point i'm trying to say i'm an old fan of this channel 😅🥰
Dane here.... If I make a slingshot it is a breach of the weapon laws in my country.... But I can go buy a harpoon tomorrow no problem... Not kidding... Beautiful slingshot Joerg!
Jörg ich mag dich persönlich ,deine Erfindungen ,dein Gesicht und die Stimme ,welche für mich mehr als sympathisch ist. Mir ist deine politische Einstellung egal .Für mich ist wichtig ein Erfinder ,begabter künstler wahrzunehmen .Ich habe maximale Freude an deinen Videos ❤
As much as I appreciate all the beautiful materials people build Ss's out of, I love seeing channels like this do great builds with free materials. Not everyone has the spare money for fancy materials nor fancy tools. I can't speak for the rest of the world, but here in Canada, shipping pallets are always available for free and even advertised on websites that list local "used" goods for sale. Some businesses love to have people come take them away. And you can actually get some very beautiful wood grains and even hardwoods from some of them! I've got some pieces of split firewood I pulled out of a load than have an incredible wavy pattern in them!
Man, it's great to see you still making content after all these years. I used to watch you years ago when you're channel was in its earlier stages, and I refound your channel today! As for this build, I would keep it as it is. It's cheap wood and I love the utilitarian design that showcases its origins. Save the fancy finishing supplies for higher-quality wood. =)
When I see such a video of yours, in which you are making simple (!) slingshot or some toy, I am always hoping that you're going to offer it as a give away item in the end :) Awesome stuff btw, I like to see that you are still making slingshots with the same passion as on the beginning.
I no longer do this. Got sued because I don't have a notary around for the drawing. Complaints because customs (probably) seized the thing and it never arrived. Complaints because the thing broke due to a fork hit. And and and. My life is too short for this.
Joerge; I get the impression that you might benefit from slightly longer rubber bands. You seem to be running into the limit of stretch on those bands, where the force goes up a lot for the last few centimeters of draw. Or I could be imagining it.
Joerg, all my life people have been telling me "not to polish .....", but I am convinced you could make a slingshot out of one. Awesome little handful, that! The board looked like Oriented Strand Board- or OSB; this was a subfloor sort of thing to build floors on top of with pretty large capacity. I wouldn't want to drive nails through it, and you hammered through it with steel balls.
I remember watching all your videos back when I was 12. Now I'm 20 and I see that you're still at it after all those years. It's good to see you're still at it brother!
Wait. A slingshot video on the slingshot channel? Huh? What is this, like 2008?~ Yes, I've been watching that long, and still enjoying what you do. But I definitely enjoyed the throwback build too. :)
that handle is very close to what I came up with for my crossbow. I was able to put a bit more flare and sweep to it thanks to the hunk of wood I was working with though. Super comfortable in the hand.
I enjoy watching you plow through wood with that scroll saw🙂. But why not use ordinary wood glue? I hear the bond becomes stronger than the wood itself.
Ich arbeite jetzt schon etwa ein Jahr mit Laser Plottern (habe 3). Mit meinem neuen kann man 15mm Bretter durchschneiden. Man plant vorher alles am Computer (Ich benutze Autodesk Fusion 360, auch für 3d Drucken und CNC) und dann schneidet der Plotter das auf den Zehntelmillimeter genau aus. Habe zB auch schon winzige Zahnräder etc damit gemacht. Wär vielleicht auch was für dich, den Umgang damit zu lernen dauert nur etwa 2 Monate max.
Obviously it's up to you, Joerg, but you ought to consider wearing a dust mask when sanding things (especially in an enclosed space), sawdust isn't great on the lungs!
I just saw Eddie Hall collaborate with Kentucky Ballistics, which was unexpected. Since Eddie is UK based, I think you would get a kick out of a collaboration where you make an insane slingshot for the world's strongest man. Really push the limits of insanity :)
I have not read all the commets jet, but for me the slingshot looks totally like a reindeer. Maybe colours could inforce this impression. Christmas is commimg and why not surprising your beloved 6 years old son... With only one Thera-Band and 10mm steel to make it save, of course....;;;
Joerg... for a moment I thought I was watching Matt on the Demolitionranch Channel.... lol Maybe because lately so many people telling him in the comments that he should make a video with you... What a video that would be...!
Yes, it is very close to the Lead Launcher. Truth be told, I make very few videos about slingshots now because I think the designs are still the best I can come up with, so it is getting a bit repetitive.
@@Slingshotchannel I don’t blame you, while slingshots are still a great bit of fun to be had, it doesn’t necessarily make sense to put time into a design that is basically already been perfected. there are other muscle operated weapons that would be interesting to see brought into our modern world, of course with your work as of late being blowguns. They’ve been my preferred projectile weapon for target practice recently because as long as I don’t smoke, I won’t have to worry about finding the power for the blowgun or have to maintain any bands.
I love your slingshot videos, so thank you a lot for making one again. Of course i also love your recent crossbow inventions. Can you weapponize some household item once again? How about an automatic slingshot gun made from a laundry washer. Or how about a slingshot, that shoots thick books like a bible. That way you could cast out the demons from the one or other hater😂. Anyways you are the greatest and probably the only channel, that i watch continuously over almost a decade
Back to the basics... It's a piece of art, but also fully functional. I think leave it as it is. With use, it will get smooth and shiny. If you want to stain it, dip your (gloved) hand in stain and shoot a few rounds. Smashing through that board was impressive. Can imagine, in the hands of such a slingshot profi, the zombies wouldn't stand a chance.
I'm lucky enough to own one of Jeorg's handcrafted hammer grip slingshots, it's one of my most prized posessions. Every time I hold it i'm reminded just how much strength it takes to shoot such large ammo effectively, it's awe inspiring!
Great work on this video! Personally I think it's perfect the way it is. But if there's need for any embellishments why not try heat carving some designs?
Hi Jörg. Schönes Beispiel, wie man selbst aus "Schrott" noch tolle Sachen machen kann. Ich bemühe mich auch immer, möglichst wenig wegzuwerfen. Und zweitens, bei meinen Makita Fingerschleifer reißen ständig die Bänder an der Klebestelle, selbst die Markenbänder. Die Maschiene ist sauber, das Band zentriert und selbst bei geringer Geschwindikeit reißen sie. Vielleicht kennst du oder irgendwer das Problmen ja. Im internet finde ich dazu nichts. Man soll wohl keine allzu alten Bänder benutzen, vielleicht liegts daran, ich weiß es nicht.
Im a simple man, I see a Jorge slingshot video, I click. Simple
I click like while the ads are still playing.
Phantastisch,was du aus Schrottholz basteln kannst. Respekt! Unglaublich, was die 22mm Stahlkugeln für eine Trefferwirkung haben. Das möchte keiner abbekommen.....👍
This and your repeating blowgun proof of concept video are the kinds of things that brought me to your channel. I love your ideas and builds. I'm delighted to see you doing this stuff again.
makes 2 of us
There is a certain measure of joy in your laughter that is higher when you build and use a slingshot versus all your other videos. I've really missed this, Joerg. Thanks for bringing it back.
Ah, another ordinary slingshot video, perfect! JUST WHAT WE NEEDED.
And from cheap wood to one resilient slingshot, wonderful!
Finally a good ol fashioned video
Fun to see the shooting edit!
Keep it raw as is! Oh I would love to see you put on some keyboard key tops (the thin bone plates) on a slingshot, making it high class luxury
Slingshot ..... yeah Joerg we love it and happy to see a build again. Honestly you keep me watching just by being you but love the builds and inventions best !
Welcome home slingshot man. It is good not to forget basic skills even so you are making spaceships in archery. During all those years you have made a lot of slingshot's and this is your way to tell the people that they can make slingshot in survival situation too from nothing and with minimal knowledge and tools.
I saw an wood finish made from lime soaked in water and brushed on the wood. After scratching off lime from the wood, wood had beautiful reddish colour. Also rubbing wax in the wood makes brownish finish, and it's darker with more rubbing. But you should make tests on a scrap wood and then make a choice. I used once simple commercial black wood colouring by dipping wood into can, and after that oil varnish. It ended great.
Nice build and tutorial! Appreciate all your builds but the slingshots ones remind me of hanging out with the lads and talking about the insane things you fired - the good old days!
Followed you channel for over a decade now. Remember the first video I watched, you fired a slingshot that was "H" shaped.
Anyways, thanks for the trip down memory lane. Stay safe big man👍
over a decade. dayum son. been here since 2015 or 16. joerg for president lol
Yeah. I stumbled randomly on the original forum when it started. Was great. One of the very few forums that people were nice and supportive of each other on. Haven't been back there in a very long time and this reminds me a should go check it out if it still exists!😁👍
The slingshot videos are the best! I still remember when I built my own Rambone with your tutorial!
I made a rambone a long time ago when Joerg posted the tutorial series. It's still working great; I used it on my last camping trip!
This is the Joerg I like!! Making beautiful and functional slingshots, with raw and bestial bandsets!! Awesome!!
From 9:44 to 12:00 I laughed so hard!!! Your videos are always inspiring and funny. Keep it up!! 👍👍👍👍👍👍
It's great to see a return to the old school Slingshot Channel content, even if only for a video or two.
Drückt Jörg irgendwas in die Hand, und er baut eine Waffe daraus.
Welch göttliche Gabe, danke daß du sie mit uns teilst.
👍👍Drei Daumen nach oben aus DK 🇩🇰
The plywood is OSB. Orientated strand board. Awesome sling shot.
It's very tough
Great job Joerg! The plywood your using is called OSB= Oriented Strand Board in the States.
It's also called OSB in German. He got it mixed up with MDF and plywood.
I think you should keep it as is. Great video!
Gotta love these simple slingshot making videos, just like the good old days, not that the present days are bad thats not my point i'm trying to say i'm an old fan of this channel 😅🥰
Jorg you should try burn surface of this one with gas torch, soft wood makes very nice pattern this way.. Thanks for nice video :)
Love the look on Joerg's face when doing sanding. Focused, yet peaceful. Nice to see a good old fashion Ss build!
Dane here.... If I make a slingshot it is a breach of the weapon laws in my country.... But I can go buy a harpoon tomorrow no problem... Not kidding...
Beautiful slingshot Joerg!
Yeees a « simple » slingshot video like the good old days !! My favorites ! And I think for you too Jorg, you look way happier ! 😁
Jörg ich mag dich persönlich ,deine Erfindungen ,dein Gesicht und die Stimme ,welche für mich mehr als sympathisch ist. Mir ist deine politische Einstellung egal .Für mich ist wichtig ein Erfinder ,begabter künstler wahrzunehmen .Ich habe maximale Freude an deinen Videos ❤
Another great piece! Love the classic slingshot videos.
Beautiful.
Good to see you getting back to origins every once in awhile.
As much as I appreciate all the beautiful materials people build Ss's out of, I love seeing channels like this do great builds with free materials. Not everyone has the spare money for fancy materials nor fancy tools. I can't speak for the rest of the world, but here in Canada, shipping pallets are always available for free and even advertised on websites that list local "used" goods for sale. Some businesses love to have people come take them away. And you can actually get some very beautiful wood grains and even hardwoods from some of them! I've got some pieces of split firewood I pulled out of a load than have an incredible wavy pattern in them!
What a suprise, Jörg is not making a weak slingshot. :)
Man, it's great to see you still making content after all these years. I used to watch you years ago when you're channel was in its earlier stages, and I refound your channel today!
As for this build, I would keep it as it is. It's cheap wood and I love the utilitarian design that showcases its origins. Save the fancy finishing supplies for higher-quality wood. =)
Pretty sweet. Where I grew up, in the Southeast US, that material is called "Chip Board." Best of Days.
I am surprised that slingshot held together. Interleaved wood, like yout forks and plywood, are amazing.
I clicked to fast when I saw this in my feed. So fun watching you work slingshot magic
I want to hear Joerg and Scott from Kentucky Ballistics get into a laugh off! I think those two would make one hell of a fun collab!
Been a long time since I watched this channel, glad to see you're still at it! Definitely think the simpler look works best for this piece
When I see such a video of yours, in which you are making simple (!) slingshot or some toy, I am always hoping that you're going to offer it as a give away item in the end :) Awesome stuff btw, I like to see that you are still making slingshots with the same passion as on the beginning.
I no longer do this. Got sued because I don't have a notary around for the drawing. Complaints because customs (probably) seized the thing and it never arrived. Complaints because the thing broke due to a fork hit. And and and. My life is too short for this.
That's too bad, but understandable. Anyway, those are always useful tutorials. Cheers
@@Slingshotchannelyou can do secret raffles. drop it somewhere in Germany and leave a series of hints on how to find ;)
Lovely return to some channel roots, enjoyed it greatly
Joerge; I get the impression that you might benefit from slightly longer rubber bands. You seem to be running into the limit of stretch on those bands, where the force goes up a lot for the last few centimeters of draw. Or I could be imagining it.
This was such an awesome idea, I love it! Glad you made and shared it!
"Eeeee-eeeergh!"
I love it! Another great video!
Love seeing a classic sling shot build!
Joerg, all my life people have been telling me "not to polish .....", but I am convinced you could make a slingshot out of one. Awesome little handful, that! The board looked like Oriented Strand Board- or OSB; this was a subfloor sort of thing to build floors on top of with pretty large capacity. I wouldn't want to drive nails through it, and you hammered through it with steel balls.
Great to see a classic slingshot build
Always enjoy the actual slingshot videos
You reminded me of a Fremen from Dune when you're making the straining noises xD
Simple is beautiful Joerg! A great video about the basics. Back to grass roots concepts, very refreshing!
I remember watching all your videos back when I was 12. Now I'm 20 and I see that you're still at it after all those years. It's good to see you're still at it brother!
These kind of Jörgs videos remind me of good times.
Wait. A slingshot video on the slingshot channel? Huh? What is this, like 2008?~
Yes, I've been watching that long, and still enjoying what you do. But I definitely enjoyed the throwback build too. :)
that handle is very close to what I came up with for my crossbow. I was able to put a bit more flare and sweep to it thanks to the hunk of wood I was working with though. Super comfortable in the hand.
You’re an amazing RUclipsr, I miss watching your videos when I were younger, the frozen oreos, haha!
volim gledat tvoje videe
Finally a slingshot video. Loved it
inadvertantly our hero just made one of the greatest memes of all eternity, eeeeeha
Cool nicht nur zurück zu den wurtzeln vom kanal sonder sogar im tutorial format !!! #Respect
Amazing. Great workout and patience to get it through 😎
What do I think?
I think watching you savage that sheet of chipboard was the best part of my day!
Never stop being you.
God bless Joerg Sprave!
I love these builds!
I enjoy watching you plow through wood with that scroll saw🙂. But why not use ordinary wood glue? I hear the bond becomes stronger than the wood itself.
10:47
mother: "WHAT ARE YOU WATCHING?"
Back to basics, love these types of videos!! Great Slingshot.
Thank you for the video ! ☺♥
Ich arbeite jetzt schon etwa ein Jahr mit Laser Plottern (habe 3). Mit meinem neuen kann man 15mm Bretter durchschneiden. Man plant vorher alles am Computer (Ich benutze Autodesk Fusion 360, auch für 3d Drucken und CNC) und dann schneidet der Plotter das auf den Zehntelmillimeter genau aus. Habe zB auch schon winzige Zahnräder etc damit gemacht. Wär vielleicht auch was für dich, den Umgang damit zu lernen dauert nur etwa 2 Monate max.
I like it as is. I don't think it needs paint, etc. The laminated wood look is kind of cool.
nice. Good old slingshot channel
Obviously it's up to you, Joerg, but you ought to consider wearing a dust mask when sanding things (especially in an enclosed space), sawdust isn't great on the lungs!
Brilliant! Now I can use the cheap wood available around me! I would say let it be. It is a working man's slingshot.
I just saw Eddie Hall collaborate with Kentucky Ballistics, which was unexpected. Since Eddie is UK based, I think you would get a kick out of a collaboration where you make an insane slingshot for the world's strongest man. Really push the limits of insanity :)
I have not read all the commets jet, but for me the slingshot looks totally like a reindeer. Maybe colours could inforce this impression. Christmas is commimg and why not surprising your beloved 6 years old son... With only one Thera-Band and 10mm steel to make it save, of course....;;;
Awww, Jörg gettin sentimental for the old days.
All done without gloves... I would have lost ten times all my fingers! Nice job
I love a good slingshot build video.
leave it as is. looks fantastic joerg! got character fs
OSB Oriented strand board. Thanks for the video.
Joerg... for a moment I thought I was watching Matt on the Demolitionranch Channel.... lol
Maybe because lately so many people telling him in the comments that he should make a video with you... What a video that would be...!
Nice Slingshot,seems reminiscent of the old Lead Launcher design from many years ago, very cool!!
Yes, it is very close to the Lead Launcher. Truth be told, I make very few videos about slingshots now because I think the designs are still the best I can come up with, so it is getting a bit repetitive.
@@Slingshotchannel I don’t blame you, while slingshots are still a great bit of fun to be had, it doesn’t necessarily make sense to put time into a design that is basically already been perfected. there are other muscle operated weapons that would be interesting to see brought into our modern world, of course with your work as of late being blowguns. They’ve been my preferred projectile weapon for target practice recently because as long as I don’t smoke, I won’t have to worry about finding the power for the blowgun or have to maintain any bands.
I love your slingshot videos, so thank you a lot for making one again. Of course i also love your recent crossbow inventions. Can you weapponize some household item once again? How about an automatic slingshot gun made from a laundry washer. Or how about a slingshot, that shoots thick books like a bible. That way you could cast out the demons from the one or other hater😂. Anyways you are the greatest and probably the only channel, that i watch continuously over almost a decade
This is the Slingshot Channel we know and love!
yiEeE THUNK
Yeii THUNK
MaaH THUNK
I love this guy
"Talks business " ... I love it!
My favorite videos on the slingshot channel contain slingshots!
Good to see a slingshot on the Chanel
I like that design .
Really cool to see a more old school build video, what a classic.
Back to the basics... It's a piece of art, but also fully functional. I think leave it as it is. With use, it will get smooth and shiny.
If you want to stain it, dip your (gloved) hand in stain and shoot a few rounds.
Smashing through that board was impressive. Can imagine, in the hands of such a slingshot profi, the zombies wouldn't stand a chance.
Cool #Back To The #Roots ...
Dieser Mann ist komplett verrückt - ich liebe es!
OSB oriented strand board
I'm lucky enough to own one of Jeorg's handcrafted hammer grip slingshots, it's one of my most prized posessions. Every time I hold it i'm reminded just how much strength it takes to shoot such large ammo effectively, it's awe inspiring!
Back to basics !!!
Love it !!
Eeeeeeeeee;;;; yaaaaa crac
Finally a new slingshot video!
Great work on this video!
Personally I think it's perfect the way it is. But if there's need for any embellishments why not try heat carving some designs?
Hi Jörg. Schönes Beispiel, wie man selbst aus "Schrott" noch tolle Sachen machen kann. Ich bemühe mich auch immer, möglichst wenig wegzuwerfen. Und zweitens, bei meinen Makita Fingerschleifer reißen ständig die Bänder an der Klebestelle, selbst die Markenbänder. Die Maschiene ist sauber, das Band zentriert und selbst bei geringer Geschwindikeit reißen sie. Vielleicht kennst du oder irgendwer das Problmen ja. Im internet finde ich dazu nichts. Man soll wohl keine allzu alten Bänder benutzen, vielleicht liegts daran, ich weiß es nicht.
Neue Bänder, volle Geschwindigkeit, aber weniger Druck!
Klasse! Darf ich fragen, woher nimmst du das Gummi? Wo kann man das kaufen?
Nice to see some slingshot again I can’t lie
Imagine breaking into his house and the last thing you hear is heeeeeh yaaaaa!!! as he stretches the rubber 😂😂😂 love the content
Hi so much awesome.thank you men.
Back to the roots :D 👍 But fully adapted to the modern times: UPCYCLING (using scrap for making new things).
Awesome ❤. But Joerg, you know what we really want! A Legolas slingshot 🤟
Nice and oldschool
I would not like to hit in the head by it that's for sure .
Nice to see you building sling shots Joerg
Ok Joerg, you and the Mrs need a trip to the US, hang out with Scott at Kentucky Ballistics. :-)
11:40 time for a nap 😂