Great idea and appreciate you sharing. Having said that, do not think the toggle switch is dumb. It is simply a different solution. I would not make a post saying that not having a tender is dumb.
I have a 96 fatboy and I’ve searched everywhere and finally found someone who doesn’t do shade tree bull shit.thanks man I really appreciate this video
Toggle switch is not "dumb". Your way causes a possible future problem with your ignition. On a Harley, a battery tender is a requirement on all newer bikes with computers, alarms, key fobs and other potential current draws. You have no experience (calling wire a cord for example) so it's understandable to be ignorant of the facts, but insulting people who know what they are doing isn't very nice.
I ran the toggle and volume flush mounted through the side panel. Speakers were too big in my opinion for drag bar mount so they are rear sissy bar mounted. Now I’m curious if I can splice a third speaker front mounted.
Nice job! I have a suzuki boulevard m109 and i was able to put my amp right under the seat where the tools came with the bike and i put my bike tools in one of my hard bags.
When ever you add any electrical accessory to a bike, use a 12 volt relay. That way when you stop and shut the bike off, your accessory also shuts off. I have all my accessories run thru relays. My driving lights, my stereo, and my heated grips all shut off automatically when the bike is shut off. And my battery doesn't run dead.
I use a toggle switch because I don't want the amp pulling power while trying to start the bike, and also, I don't want the amp pulling power while I might have the key turned on without the engine running, like while working on it/ troubleshooting. My speakers are on the crash bar instead of the handlebars. Good video
How does having more control over the circuit make no sense? My car stereo has an off switch that's independent of the ignition, why shouldn't my bike?
@@davidcook2513 probably a hillbilly tough guy wanna be who lights his smoke to ride and let the wind power the nicotine into his missing toothed mouff
Love his set up, an how all his wires run straight down the middle an his battery is under his seat... but i will say i agree with the toggle for other reasons too
Mitchell Dempsey I noticed that if you wanna play anything with bass it doesn’t sound good at all and you will definitely blow a speaker like I have!! So classic R&B and classic rock goes very well and loud with the 2 speakers!! However I recently upgraded to the 4 speakers and it definitely gets loud with any kind of music!! I also upgraded the speakers so the tweater would stop blowing!!
You run a toggle switch so you can turn the amp and complete system off when riding if wanted. Otherwise, the bike will have power running to the amp and speakers constantly.. until the ignition is turned off. Ride safe fellas!
The way JT wired it is very similar to how a stereo works on a car, or on a factory installed motorcycle stereo. The system turns on when the key is turned on. It shuts off when the key is turned off. JT is doing the wiring much closer to the factory way. That being said, JT drop using "Gay" as an insult for something bad. You did a professional style installation, use professional language.
So the way you have it wired the ignition switch is on running the fuel pump (providing it's fuel injected), and possibly the tail light while the bike is not running. My bike doesn't have an acc option and I like to listen to the stereo when parked. So The toggle or rocker switch may not be dumb.
@@JTshuntingandfishingt appears that is great for your bike providing it has electronic ignition (I'm sure it does). I have several late seventies bikes that have points. The bike I will be installing the Boss on, the fuel pump primes when the key is turned on and maybe the tail light comes on, I'm not sure. For this type the toggle ocker switch seems best. My reason for checking videos was appearance and quality reviews. Does it sound good at 75 mph? Thanks
Joe R it’s alright at 75 if you listen to classic rock. Anything with bass will blow the speakers for sure!! I’ve blown a few and switched out the stock ones to aftermarket speakers!! Witch are way better for sure!! I got them of amazon as well. They’re 3 inch speakers I would suggest getting aftermarket speakers. I paid 30$ for 2 new ones and they haven’t blown and sound way better.
Do you need an amp on a bike? I got an old bike that had a head unit and speakers already on it but it looks like they're wired to the alternator or something I dunno. They're on/off with the key as should be but I want to add tweeters and don't know how to connect them.
Hold up !!!! This is Not the Only Right Way. This is a different way. You now have to turn on your bike when you want to hear music. That means your lights will be on making a draw on the battery. So when your having a beer with the boys in the garage and want to just hear some tunes.... you have to turn on ignition It should be TOGGLE switch. Just FYI. By the way nice bike.
Frank Porter when I listen to music it’s wile I ride!! Not sitting in my garage like a dip shit using my bike as a stereo. If you use your bike as a stereo in your garage, you’re a fuckin dumb ass and should buy a real stereo for your garage!! 😂😂😂. If you use a toggle switch for your stereo you’re a fuckin idiot!!
Frank Porter and on top of that the only difference between my way and your way is YES my ignition is on and YES that would mean my lights are on!! But my stereo isn’t connected to my battery. YOURS is connected to your battery with a toggle switch... so when you turn on your stereo, YES your lights aren’t on and YES your ignition is OFF.. but as soon as you turn on your stereo you’re still making a draw on the battery cuz that’s what your stereo is connected to!!! 😂😂😂😂😂😂
Ya toggle switch is only as smart as the operator. I suggest running your accessories thru relays. My driving lights and stereo amp are run directly from the battery and triggered by other wires to have them come on with the switch. That way I never accidently leave anything running after I shut the engine off.
Can a relay be used directly with the positive from the battery with no battery draw issues or does it still need to be connected to an ignition wire? I'm getting ready to set up my system and looking for any info or advice I can find.
@@ElTresZero The Relay is just a magnetic switch that uses a trigger wire to activate the switch. It will not drain the battery. When you use a wire that comes on with your key switch, it activates the switch so it is active only when they key is on. My speaker amplifies comes on when I turn the bike on and is always on when I'm riding and always off when the bike is shut off.
Do yourself a favor and look up a video (or do a google search) on how to wire a four post relay. Two of the posts are the power from the battery to the item you are trying to power (in my case, my speaker amplifier) and the other two are the ground wire and the wire from the ignition wire source that powers the relay.
@PainterD54 I appreciate it. Have been doing so for a while now. Not many great videos out there but I'll change up my search. Thanks again for the advice.
Ever heard of an accessory switch on your ignition??? God damn you guys who watch this video are fucking idiots and if you’re using your bike as a radio you should probably stop and go ride your bike instead you fucking dummy
@@JTshuntingandfishing some people have friends to hang out with, might ride together, stop and eat somewhere and listen to music while hanging out. Might even go to a park and chill with the lady next to you in the grass and play some sweet serenading music. Just options, ya know? 😁
@@rarefindfrags it's been a long time since I've wired an ignition switch, but I believe the way JT has it wired the accessory will shoot power to the amp. It would be the same as turning the key back in your car to listen to the radio.
Not all bikes are the same so saying the way it's hooked up is stupid is stupid. And if everyone the way folks in RUclips did it wrong why are you in RUclips?
Cassandra Mclemore either way my point was you don’t have to hook it up to the battery or have a gay ass toggle switch!! And I was the only one on RUclips to show how that’s done!! Cuz everyone else uses the battery and a toggle switch! Hints why I did the video dumbass!! And clearly you need some help hooking yours up cuz here you’re watching my video. Dip shit!!! 😂😂😂🤣🤣
Cassandra Mclemore and yes you’re right about all bikes not being the same!! But all the wiring for bikes are the same!!! So do your homework before you decide to talk shit about someone’s video...
People rave about these speakers....Guess Im doing something wrong because mine sound like SHIT. Even downloaded an equalizer on my phone....Still sounds like someone is singing in a tin can. PERIOD.
![*SUPER RARE* THE PARADIGM IS BACK?!?!? Fortnite Item Shop [August 6th, 2024] (Fortnite Chapter 5)](http://i.ytimg.com/vi/ru6xSH1RaPw/mqdefault.jpg)
Great idea and appreciate you sharing. Having said that, do not think the toggle switch is dumb. It is simply a different solution. I would not make a post saying that not having a tender is dumb.
I have a 96 fatboy and I’ve searched everywhere and finally found someone who doesn’t do shade tree bull shit.thanks man I really appreciate this video
Anytime my brother. Subscribe and you’ll love everything I got going on…
Toggle switch is not "dumb". Your way causes a possible future problem with your ignition. On a Harley, a battery tender is a requirement on all newer bikes with computers, alarms, key fobs and other potential current draws. You have no experience (calling wire a cord for example) so it's understandable to be ignorant of the facts, but insulting people who know what they are doing isn't very nice.
That front end made it look like a road king at first sic bike man I dig it
I ran the toggle and volume flush mounted through the side panel. Speakers were too big in my opinion for drag bar mount so they are rear sissy bar mounted. Now I’m curious if I can splice a third speaker front mounted.
Nice job! I have a suzuki boulevard m109 and i was able to put my amp right under the seat where the tools came with the bike and i put my bike tools in one of my hard bags.
Thomas Bell good job brother!! That’s how it’s done
Nice ! They sound Great ...
When ever you add any electrical accessory to a bike, use a 12 volt relay. That way when you stop and shut the bike off, your accessory also shuts off. I have all my accessories run thru relays. My driving lights, my stereo, and my heated grips all shut off automatically when the bike is shut off. And my battery doesn't run dead.
Better than my idea I was just gonna hook it up to the lights! Yours is better yup gonna do it that way instead
I use a toggle switch because I don't want the amp pulling power while trying to start the bike, and also, I don't want the amp pulling power while I might have the key turned on without the engine running, like while working on it/ troubleshooting.
My speakers are on the crash bar instead of the handlebars.
Good video
That makes no since at all. I love people who try to tell a technician why they use a toggle switch. 🤦♂️
How does having more control over the circuit make no sense? My car stereo has an off switch that's independent of the ignition, why shouldn't my bike?
The guy saying that making a decision to wire in a toggle switch is stupid is the same guy who says it makes no "since" at all. That's pure gold!
@@davidcook2513 probably a hillbilly tough guy wanna be who lights his smoke to ride and let the wind power the nicotine into his missing toothed mouff
Love his set up, an how all his wires run straight down the middle an his battery is under his seat... but i will say i agree with the toggle for other reasons too
JT thanks for the video. Super clean set up well done thats how i would do it to. How do you find the audio quality?
Mitchell Dempsey I noticed that if you wanna play anything with bass it doesn’t sound good at all and you will definitely blow a speaker like I have!! So classic R&B and classic rock goes very well and loud with the 2 speakers!! However I recently upgraded to the 4 speakers and it definitely gets loud with any kind of music!! I also upgraded the speakers so the tweater would stop blowing!!
Guy with Harley does better than dealer by far
Just for future reference, they are called a wire not a cord bro. Great video!
Hey I'd like to install that kind of speakers on my Vulcan classic 900 2009. Which bag did you use to put the amp into? Thank you.
I didn’t use a bad. I mounted it inside my stalker kick under the light
You run a toggle switch so you can turn the amp and complete system off when riding if wanted. Otherwise, the bike will have power running to the amp and speakers constantly.. until the ignition is turned off. Ride safe fellas!
Your old lady has a toggle switch on her strap on.
Is the ignition cord wire orange and white for all Harley Davidson’s I have a 2009 1200 custom
For your bike. YES
Anyone looking at these, they’re $90 for the 600w 2 speaker system on jp cycles right now.
Came for speakers and stayed for the fat boy, it's looking good.
Jt, you have any issues having not used a relay? So much cleaner skipping that step!
Curtis's LaJeunesse no issues at all my friend!!
That's a sexy machine.
So the amp has to run all the time even when you're not listening to music
Lmfao 🤣
The way JT wired it is very similar to how a stereo works on a car, or on a factory installed motorcycle stereo. The system turns on when the key is turned on. It shuts off when the key is turned off. JT is doing the wiring much closer to the factory way.
That being said, JT drop using "Gay" as an insult for something bad. You did a professional style installation, use professional language.
Stop being so sensitive
That's gay!!
Is there anywhere I could possibly go to get it installed for me?
Angel Raygoza Any local self made mechanic shop!! I don’t know if Harley would do it!!
@@JTshuntingandfishing thanks!!👍🏼
Haha 😂 thanks. No issues here. I’ll pass on carving up my stock wiring system. Thanks though..
Lol right? Hard pass....
So the way you have it wired the ignition switch is on running the fuel pump (providing it's fuel injected), and possibly the tail light while the bike is not running. My bike doesn't have an acc option and I like to listen to the stereo when parked. So The toggle or rocker switch may not be dumb.
Joe R it’s got a carb
@@JTshuntingandfishingt appears that is great for your bike providing it has electronic ignition (I'm sure it does). I have several late seventies bikes that have points. The bike I will be installing the Boss on, the fuel pump primes when the key is turned on and maybe the tail light comes on, I'm not sure. For this type the toggle
ocker switch seems best. My reason for checking videos was appearance and quality reviews. Does it sound good at 75 mph? Thanks
Joe R it’s alright at 75 if you listen to classic rock. Anything with bass will blow the speakers for sure!! I’ve blown a few and switched out the stock ones to aftermarket speakers!! Witch are way better for sure!! I got them of amazon as well. They’re 3 inch speakers I would suggest getting aftermarket speakers. I paid 30$ for 2 new ones and they haven’t blown and sound way better.
JT - What Speakers are these Boss 600?
Chad Bozak boss audio system MCBK470B. Amazon!! 120$
@@JTshuntingandfishing Thanks dude
What brad are those speakers add link please
Boss system audio amazon
Do you need an amp on a bike? I got an old bike that had a head unit and speakers already on it but it looks like they're wired to the alternator or something I dunno. They're on/off with the key as should be but I want to add tweeters and don't know how to connect them.
Frank Leonoyed definitely need a amp
@@JTshuntingandfishing so just splicing the tweeters into the existing speakers is wrong then?
Hold up !!!!
This is Not the Only Right Way. This is a different way. You now have to turn on your bike when you want to hear music. That means your lights will be on making a draw on the battery. So when your having a beer with the boys in the garage and want to just hear some tunes.... you have to turn on ignition It should be TOGGLE switch. Just FYI. By the way nice bike.
Frank Porter when I listen to music it’s wile I ride!! Not sitting in my garage like a dip shit using my bike as a stereo. If you use your bike as a stereo in your garage, you’re a fuckin dumb ass and should buy a real stereo for your garage!! 😂😂😂. If you use a toggle switch for your stereo you’re a fuckin idiot!!
Frank Porter and on top of that the only difference between my way and your way is YES my ignition is on and YES that would mean my lights are on!! But my stereo isn’t connected to my battery. YOURS is connected to your battery with a toggle switch... so when you turn on your stereo, YES your lights aren’t on and YES your ignition is OFF.. but as soon as you turn on your stereo you’re still making a draw on the battery cuz that’s what your stereo is connected to!!! 😂😂😂😂😂😂
You're a dumbass dude
you do know most motorcycles have an accessory selection on the key right?
Just turn your ignition switch to the left which is accessory…🤦🏻♂️
Could have just used a piggy back fuse adapter... i.e..the right way..
show!
Good vid bro. Question though, how exactly did you splice into the fuse?
delfin7672 I just cut the cord and added my positive to it.
Right on and what is that the negative side is connected to?
@@delfin7672 the negative post going onto the frame it looks like
Ya toggle switch is only as smart as the operator. I suggest running your accessories thru relays. My driving lights and stereo amp are run directly from the battery and triggered by other wires to have them come on with the switch. That way I never accidently leave anything running after I shut the engine off.
Can a relay be used directly with the positive from the battery with no battery draw issues or does it still need to be connected to an ignition wire? I'm getting ready to set up my system and looking for any info or advice I can find.
@@ElTresZero The Relay is just a magnetic switch that uses a trigger wire to activate the switch. It will not drain the battery. When you use a wire that comes on with your key switch, it activates the switch so it is active only when they key is on. My speaker amplifies comes on when I turn the bike on and is always on when I'm riding and always off when the bike is shut off.
Thank you! So just so im sure. I can connect the wire directly to the positive terminal? Or would it be best to tap into a different "hot" wire?
Do yourself a favor and look up a video (or do a google search) on how to wire a four post relay. Two of the posts are the power from the battery to the item you are trying to power (in my case, my speaker amplifier) and the other two are the ground wire and the wire from the ignition wire source that powers the relay.
@PainterD54 I appreciate it. Have been doing so for a while now. Not many great videos out there but I'll change up my search. Thanks again for the advice.
You have to turn on your bike to listen to the radio...lol
Ever heard of an accessory switch on your ignition??? God damn you guys who watch this video are fucking idiots and if you’re using your bike as a radio you should probably stop and go ride your bike instead you fucking dummy
@@JTshuntingandfishing some people have friends to hang out with, might ride together, stop and eat somewhere and listen to music while hanging out. Might even go to a park and chill with the lady next to you in the grass and play some sweet serenading music. Just options, ya know? 😁
@@rarefindfrags it's been a long time since I've wired an ignition switch, but I believe the way JT has it wired the accessory will shoot power to the amp. It would be the same as turning the key back in your car to listen to the radio.
@Swizzle Dwezzl u seems "like a the dude" that makes no sense. What's your point brother?
Don't want a garbage switch in my bike either
Not all bikes are the same so saying the way it's hooked up is stupid is stupid. And if everyone the way folks in RUclips did it wrong why are you in RUclips?
Cassandra Mclemore either way my point was you don’t have to hook it up to the battery or have a gay ass toggle switch!! And I was the only one on RUclips to show how that’s done!! Cuz everyone else uses the battery and a toggle switch! Hints why I did the video dumbass!! And clearly you need some help hooking yours up cuz here you’re watching my video. Dip shit!!! 😂😂😂🤣🤣
Cassandra Mclemore and yes you’re right about all bikes not being the same!! But all the wiring for bikes are the same!!! So do your homework before you decide to talk shit about someone’s video...
Or you can just run the wire to the accessory fuse and not cut any wires. Smh
How u do that?
@@Vino_zx1zero it’s in the fuse panel…
Yea this is dumb af lol
People rave about these speakers....Guess Im doing something wrong because mine sound like SHIT. Even downloaded an equalizer on my phone....Still sounds like someone is singing in a tin can. PERIOD.
Shane Hoyle I’ve recently purchased new upgraded speakers from amazon and they worked a hole lot better!!! What app did you download for that?
Shane Hoyle I would turn the treble all the way up and the bass all the way down!!! That would make it a lot better for sure
@@JTshuntingandfishing I use Spotify and I have downloaded and tried all sorts of equalizer apps and tried them all...
I wouldnt know about turning the bass all the way down and trebel all the way up...That would sound horrible
show!