How to Change Engine Oil + Filter 2000 ZX6R

Поделиться
HTML-код
  • Опубликовано: 23 окт 2020
  • In this video I will be showing you the process involved in changing the engine oil and filter in this 2000 Kawasaki ZX6R. Remember to check the oil level after your first short ride after completing the oil and filter change. It's a good idea to run the bike with the fairings off for a short period of time to ensure no leaks. Let me know down below if you have any questions.
    Thanks for watching, please SMASH the LIKE and SUBSCRIBE button, I really appreciate it.
    Follow me on instagram @freeheadgasket
  • ХоббиХобби

Комментарии • 21

  • @ramenzwagermam4193
    @ramenzwagermam4193 2 года назад +6

    Some of the 00-02 Zx6r had oil burping issues. An air lock would happen and oil warning light would not clear. Easiest way is to start the bike and loosen the filter briefly until oil flows. Tighten and top up. A well documented issue amongst forums. Crazy.

    • @Calvinm
      @Calvinm  2 года назад

      Great to know, thanks for sharing this! 👍

    • @sauliukas0
      @sauliukas0 2 месяца назад

      So I 1.start the bike 2.loosen the filter 3.Wait till some oil comes out 4.Tighten the filter 5.top up on oil?

  • @Jake-qo1eg
    @Jake-qo1eg Год назад +2

    Your videos have been sooo helpful for me after grabbing one of these older zixxers. Helped me learn carburators too! Thank you!

    • @Calvinm
      @Calvinm  Год назад

      Awesome! Happy to hear this! 👍

  • @TheCrampy74
    @TheCrampy74 3 года назад +2

    I like your videos on the zx6r simple but informative 👍 no messing about. Keep up the ninja videos 📹 👏 👍

    • @Calvinm
      @Calvinm  3 года назад +1

      Thanks Paul! I try to cut the fluff out of the videos as much as possible.

  • @munster442
    @munster442 3 года назад +1

    Thanks man. Awesome video. 👍

  • @Dee-ek6vk
    @Dee-ek6vk 2 года назад

    Thanks. First time changing my motorcycle oil myself

    • @Calvinm
      @Calvinm  2 года назад

      Good luck! 👍

  • @Overthepondwristy
    @Overthepondwristy Год назад +1

    Top man 🤙🙏

  • @5E1J0
    @5E1J0 Год назад

    Hey man I know this is a old video so I’m not sure if I’ll get a response. I have a 06 zzr600 & the engine oil light is on. I’m going to do what you did to see if that fixes it. What is the exact oil you used for this?

  • @sophieparry1997
    @sophieparry1997 3 года назад +2

    Did you go for mineral, semi-synthetic or fully synthetic? I'm worried the engine will leak if i put fully synthetic in haha!

    • @Calvinm
      @Calvinm  3 года назад

      I think it was mineral (non-synthetic) oil. Don’t worry, changing to synthetic oil won’t cause your engine to leak 👍

  • @brockcummings3593
    @brockcummings3593 3 года назад +1

    How do I buy an oil filter like is there sizing or? I have the same year and model as you btw

    • @Calvinm
      @Calvinm  3 года назад

      There isn’t really sizing numbers for a oil filter other than the part number. I would recommend calling your local bike shop and having them order the part in. Or check out revzilla.com or fortnine.ca for parts. Best of luck! 👍

  • @ryanmccutcheon0904
    @ryanmccutcheon0904 3 года назад +1

    Just to confirm if the oil is half way in the glass when on kickstand when it stands up the glass is completely full is that bad?

    • @Calvinm
      @Calvinm  3 года назад

      It sounds like the engine oil is a little over full. You should be able to see the oil level in the glass circle when the bike is up right (not on the side stand). A little over full isn't the worst thing but certainly not great. Hope this helps, best of luck!

    • @ryanmccutcheon0904
      @ryanmccutcheon0904 3 года назад

      @@Calvinm I took it apart and a lot of the fluids will mix together in areas they shouldn’t of been

  • @xavierstark1071
    @xavierstark1071 3 года назад +1

    How did you remove the birdcage?

    • @Calvinm
      @Calvinm  3 года назад

      It was never on the bike when I had it. 🤷‍♂️