Это видео недоступно.
Сожалеем об этом.
Why choose a Drop-In Barrel for your 1911?
HTML-код
- Опубликовано: 13 авг 2024
- Here at Nighthawk Custom, we released our Drop-In Series of parts at SHOT Show 2020. One area of our Drop-In Series of parts is our selection of drop-in barrels. These barrels have been designed to offer customers the ease of adding a high-quality barrel right form home with only minimal gunsmithing required.
Our Drop-In Series barrels currently consist of eight options. We offer two threaded 9mm barrels, with one being a 5” and the other being a 4.25”. We also offer two 9mm barrels that have not been threaded, also in 5” and 4.25”. There are two .45 ACP barrels which are threaded, coming in 5” and 4.25” models. Finally, two .45 ACP non-threaded barrels at 5” and 4.25”.
As with our hand-fit barrels, each barrel is Fully Machined from a solid steel billet. Since not every pistol owner has a mill and laith are home, we have done much of the work for you. The barrel hood has been cut and trimmed to size, while the bottom lugs have already been profiled with a barrel link installed. The chamber has been bored out to the proper depth, making these drop-in barrels ready to install straight out of the package.
Website: www.nighthawkcustom.com/
Facebook: / nighthawkcustom
Instagram: / nighthawkcustom
Twitter: / nighthawkcustom
I’ve got some Nighthawk Parts on one of my Colt 1911’s. Their parts are truly top notch.
Thanks, Tommy!
Very cool, thx your presentation… keep up the hard work
Thank you!
hi would this fit a springfield loaded a1 45 acp
Would this fit nicely into my Tisas commander? Thanks.
It should work just fine. We always say there's a chance some fitting may be required, just because of varying tolerances from manufacturer to manufacturer.
If my barrel is 5” non threaded and I want to get a threaded barrel I still get a 5” threaded barrel right?? Cuz the threads will sit up in front of that 5 inches?? It’s my First 1911, thinking of ordering a barrel and what not to make a nice hard fit pistol. Possibly a dumb question I’m aware of this but still.
Not a dumb question. You will need a 5" threaded barrel to replace the 5" barrel in a government 1911. If we can help in any way, let us know 👍
@@NighthawkCustomFirearms Do you have an option for a blued/black 5" threaded barrel?
@@chrissonik All of our Drop-In barrels are stainless.
Which one of your threaded barrels drops into at RIA M1911 A1 FS?
It depends on your pistol. If your A1 FS is chambered in .45 ACP, then our .45 ACP drop-in threaded barrel will work. If your pistol is chambered in 9mm, none of our barrels will work. Our barrels are cut for Wilson/Nolan ramp, while the RIA uses Clark/Para.
Drop in threaded barrel for a DW Guardian in 45, is that just the SDP1006?
That is correct.
I have a Taurus M1911 45 ACP. I'm trying to look for a threaded barrel but not sure where to look. Or what kind of threaded barrel will fit.
One of our .45 ACP threaded barrels will work. It may require gunsmithing.
Do you have an option for a Springfield Ronin commander 45 acp?
I currently have a 45 1911 would it be possible to drop one of these in and convert it to a 9mm.
Sadly, no. It is a pretty extensive process to convert a .45 ACP pistol to 9mm. It would take some permanent alterations to the frame.
I'm looking for a new barrel for my colt commander 45 acp. 4.5" I do not have gun smithing capabilities. Which would you suggest, and do I need to register the barrel to me?
There's no need to register the barrel. Our .45ACP 4.25" Drop-In Series barrel would work great, but it may require minor gunsmithing. If gunsmithing is required, we could always do a new barrel install for you.
I have a 38 super kimber target 2, am really hoping someone has the chance to respond to this. I am about to order your drop in barrel link and bushing for 9mm. Its on sale! also, does the 38 super magazine work with the 9mm cartridge? THANK YOU MUCH!
Hey Ed. Those magazines are going to be caliber specific. We can't say a 9mm will work in a 38 Super mag. Anything else we can help with?
@@NighthawkCustomFirearms nope, just anxious to get the drop in barrel !!!!!!!! thank you much!
Hello, I have a S&W 1911 E series full size 5". What model threaded barrel would I pick on your website? 5" ramp or non-ramped version?
It depends what caliber your pistol is. If it's .45 ACP, non-ramped. If it's 9mm, ramped.
me falta el barrel link pin y no lo tengo como puedo reemplazarlo puedo ponerle un pedazo de acero?
Which one would you recommend for a springfield loaded operator in 45? I prefer a drop in
It should just be a 5" .45 ACP barrel like SDP1000. Or if you want a threaded barrel it would be SDP1004.
Hi. is that fit with dan wesson LAPD ? 9mm . Looking for order it.. Thanks.
I want to put a threaded barrel on a Kimber Custom II. Any fitting needed or is it drop in ready?
It's possible to have minimal fitting required. It all depends on the tolerances of the manufactured pistol. But, a lot of them drop right in.
Thank you
What bushing and link would i want if i wanted to out a match grade barrel in my colt combat commander?
And would it need smithing? Or could i get a match grade drop in?
It would need a little smithing. We couldn't say what specific link you would need without seeing the pistol. Also, the bushing that you would need, as far as our parts go, would an oversized commander bushing, which we don't have for sale. We do have those oversized commander bushings, but they are only used in builds. If you sent the pistol in to us, we could install both, but if you're wanting something closer to drop-in that you don't have to send the pistol in somewhere, that may not be what you're looking for. Wish we could give you some more convenient options. Let us know if we can help with anything else.
I just picked up a kimber custom hero and i was wanting to grt a threded barrel for it what would your recommendation be for it. Im looking to be able to run either compensators or suppressors in the future.
We can get you set up with a threaded barrel. You can always go with a drop-in barrel, or you can send your gun to our Custom Shop and we'll custom fit a threaded barrel to it.
Will the threaded barrel a good fit for Springfield Armory 1911 loaded
Yes. It may require a little gunsmithing.
I’m looking for a drop in threaded barrel for my Kimber Warrior 5” 1911 it’s black with white grips do you all make a black threaded barrel to fit that pistol? I’m saving up for an AAC NightHawk 1911 they’re just so expensive I have 50 bmgs, HoneyBadgerSDs and a Jim Fuller made AKS74URD which were all cheaper than one of your pistols. I’m trying to reconcile spending that much on a pistol but for now I’m just looking for one of your barrels, I’d appreciate any help. Thanks.
All of our drop-in threaded barrels will be stainless steel. You may want to call in and talk to Bob Reeves about the possibility of having that barrel finished in black.
@@NighthawkCustomFirearms is that one of your guys that I call
Yo Wyatt!
What’s up Mike!!!
What's up, Allen and Mike!!!
I have a SDS 1911 Govt model reproduction. It’s a 5 inch chambered in 9mm, would it be a safe bet to buy a barrel under the expectation it should re assemble just fine with no altering or a potentially costly visit to the gunsmith??
Some models the drop-in barrel won't require any gunsmithing, but in others there's minor gunsmithing that may be required. We can't say for sure on your model that there won't be any gunsmithing needed, however minor it may be.
No, you will have to fuck with it i'm sure.
I tried to contact you and it says this is is a domain name something fishy going on p,ease fix thanks for your time.
ราคาเท่าไหร่ครับ 9มม.
Does the 1911 Government fit the Springfield Loaded 1911?
Should work just fine.
@@NighthawkCustomFirearms thanks
I got a Kimber LW Stainless 45 ACP. What barrel would fit?
If it's a 5" barrel, it should be this one - www.nighthawkcustom.com/parts-and-accessories/main-barrels/sdp1000-drop-in-45acp-5-barrel
I need a barrel for a star model P 45cal.
Can you make me one or do you have one?
Hey there! Thanks for your question. Unfortunately, we do not have or make any barrels that would fit a Star Model P. Is there anything else we can help with?
@@NighthawkCustomFirearms no, thanks
What barrel would drop into an m45a1
You'd want to look at part # SDP1000.
I have custom 2 kimber would a 45 drop in work?
What model and caliber Kimber is it?
It’s a 45 custom 2 kimber goverment
As long as it is a 5" bushing barrel, one of our drop-in barrels will work just fine.
Drop-in barrels are fine if you don't care about the best.
Drop-In barrels aren't a hand fit, but for those that don't have the tools or experience to hand fit a barrel, a drop-in can still be a nice upgrade.
@@NighthawkCustomFirearms usually how much the charge cost for gunsmith to fit a semi drop in barrels ?
@@harisyoung4110 that would be a question for Bob, our Custom Shop manager. If you give us a call and dial extension 243, he can tell you all of the pricing.
heya can a 6 inch barrel be fitted onto a Kimber stainless custom ii 10mm with a 5 inch slide? I hear its best for hunting in most states or the bare minimum length, Thanks
Hi Jesse! We do not have a barrel that would fit this particular application. We have a 6" barrel, but it would need to be fit to a 6" slide, not a 5". If you have any other questions, feel free to reach out to us.
💯💯💯💯💯💯
Thank you!
can you send it to Indonesian?
Did Scott get you all the info you were looking for?
@@NighthawkCustomFirearms yes, so you can send it to Indonesian? because I really need it. about costs let me add
@@sltgamingtz9900 the account manager you spoke with, Scott, would be the one to handle all of that. He does all export orders. He can tell you what needs to be done to get it send, and then get it shipped out once we're all good.
if you can't just put the barrel in and go shoot it's not a effing drop in barrel period.
60th person wacthing
That's prime watching position!